Documentation Home
MySQL 8.4 Reference Manual
Related Documentation Download this Manual
PDF (US Ltr) - 40.0Mb
PDF (A4) - 40.0Mb
Man Pages (TGZ) - 258.6Kb
Man Pages (Zip) - 365.7Kb
Info (Gzip) - 4.0Mb
Info (Zip) - 4.0Mb


7.6.7.13 Clone System Variables

This section describes the system variables that control operation of the clone plugin. If values specified at startup are incorrect, the clone plugin may fail to initialize properly and the server does not load it. In this case, the server may also produce error messages for other clone settings because it does not recognize them.

Each system variable has a default value. System variables can be set at server startup using options on the command line or in an option file. They can be changed dynamically at runtime using the SET statement, which enables you to modify operation of the server without having to stop and restart it.

Setting a global system variable runtime value normally requires the SYSTEM_VARIABLES_ADMIN privilege (or the deprecated SUPER privilege). For more information, see Section 7.1.9.1, “System Variable Privileges”.

Clone variables are configured on the recipient MySQL server instance where the cloning operation is executed.

  • clone_autotune_concurrency

    Command-Line Format --clone-autotune-concurrency
    System Variable clone_autotune_concurrency
    Scope Global
    Dynamic Yes
    SET_VAR Hint Applies No
    Type Boolean
    Default Value ON

    When clone_autotune_concurrency is enabled (the default), additional threads for remote cloning operations are spawned dynamically to optimize data transfer speed. The setting is applicable to recipient MySQL server instance only.

    During a cloning operation, the number of threads increases incrementally toward a target of double the current thread count. The effect on the data transfer speed is evaluated at each increment. The process either continues or stops according to the following rules:

    • If the data transfer speed degrades more than 5% with an incremental increase, the process stops.

    • If there is at least a 5% improvement after reaching 25% of the target, the process continues. Otherwise, the process stops.

    • If there is at least a 10% improvement after reaching 50% of the target, the process continues. Otherwise, the process stops.

    • If there is at least a 25% improvement after reaching the target, the process continues toward a new target of double the current thread count. Otherwise, the process stops.

    The autotuning process does not support decreasing the number of threads.

    The clone_max_concurrency variable defines the maximum number of threads that can be spawned.

    If clone_autotune_concurrency is disabled, clone_max_concurrency defines the number of threads spawned for a remote cloning operation.

  • clone_buffer_size

    Command-Line Format --clone-buffer-size
    System Variable clone_buffer_size
    Scope Global
    Dynamic Yes
    SET_VAR Hint Applies No
    Type Integer
    Default Value 4194304
    Minimum Value 1048576
    Maximum Value 268435456
    Unit bytes

    Defines the size of the intermediate buffer used when transferring data during a local cloning operation. The default value is 4 mebibytes (MiB). A larger buffer size may permit I/O device drivers to fetch data in parallel, which can improve cloning performance.

  • clone_block_ddl

    Command-Line Format --clone-block-ddl
    System Variable clone_block_ddl
    Scope Global
    Dynamic Yes
    SET_VAR Hint Applies No
    Type Boolean
    Default Value OFF

    Enables an exclusive backup lock on the donor MySQL Server instance during a cloning operation, which blocks concurrent DDL operations on the donor. See Section 7.6.7.4, “Cloning and Concurrent DDL”.

  • clone_delay_after_data_drop

    Command-Line Format --clone-delay-after-data-drop
    System Variable clone_delay_after_data_drop
    Scope Global
    Dynamic Yes
    SET_VAR Hint Applies No
    Type Integer
    Default Value 0
    Minimum Value 0
    Maximum Value 3600
    Unit bytes

    Specifies a delay period immediately after removing existing data on the recipient MySQL Server instance at the start of a remote cloning operation. The delay is intended to provide enough time for the file system on the recipient host to free space before data is cloned from the donor MySQL Server instance. Certain file systems such as VxFS free space asynchronously in a background process. On these file systems, cloning data too soon after dropping existing data can result in clone operation failures due to insufficient space. The maximum delay period is 3600 seconds (1 hour). The default setting is 0 (no delay).

    This variable is applicable to remote cloning operation only and is configured on the recipient MySQL Server instance.

  • clone_ddl_timeout

    Command-Line Format --clone-ddl-timeout
    System Variable clone_ddl_timeout
    Scope Global
    Dynamic Yes
    SET_VAR Hint Applies No
    Type Integer
    Default Value 300
    Minimum Value 0
    Maximum Value 2592000
    Unit seconds

    The time in seconds that a cloning operation waits for a backup lock. The backup lock blocks concurrent DDL when executing a cloning operation. This setting is applied on both the donor and recipient MySQL server instances.

    A setting of 0 means that the cloning operation does not wait for a backup lock. In this case, executing a concurrent DDL operation can cause the cloning operation to fail.

    Concurrent DDL is permitted on the donor during a cloning operation if clone_block_ddl is set to OFF (the default). In this case, the cloning operation does not have to wait for a backup lock on the donor. See Section 7.6.7.4, “Cloning and Concurrent DDL”.

  • clone_donor_timeout_after_network_failure

    Command-Line Format --clone-donor-timeout-after-network-failure
    System Variable clone_donor_timeout_after_network_failure
    Scope Global
    Dynamic Yes
    SET_VAR Hint Applies No
    Type Integer
    Default Value 5
    Minimum Value 0
    Maximum Value 30
    Unit minutes

    Defines the amount of time in minutes the donor allows for the recipient to reconnect and restart a cloning operation after a network failure. For more information, see Section 7.6.7.9, “Remote Cloning Operation Failure Handling”.

    This variable is set on the donor MySQL server instance. Setting it on the recipient MySQL server instance has no effect.

  • clone_enable_compression

    Command-Line Format --clone-enable-compression
    System Variable clone_enable_compression
    Scope Global
    Dynamic Yes
    SET_VAR Hint Applies No
    Type Boolean
    Default Value OFF

    Enables compression of data at the network layer during a remote cloning operation. Compression saves network bandwidth at the cost of CPU. Enabling compression may improve the data transfer rate. This setting is only applied on the recipient MySQL server instance.

  • clone_max_concurrency

    Command-Line Format --clone-max-concurrency
    System Variable clone_max_concurrency
    Scope Global
    Dynamic Yes
    SET_VAR Hint Applies No
    Type Integer
    Default Value 16
    Minimum Value 1
    Maximum Value 128
    Unit threads

    Defines the maximum number of concurrent threads for a remote cloning operation. The default value is 16. A greater number of threads can improve cloning performance but also reduces the number of permitted simultaneous client connections, which can affect the performance of existing client connections. This setting is only applied on the recipient MySQL server instance.

    If clone_autotune_concurrency is enabled (the default), clone_max_concurrency is the maximum number of threads that can be dynamically spawned for a remote cloning operation. If clone_autotune_concurrency is disabled, clone_max_concurrency defines the number of threads spawned for a remote cloning operation.

    A minimum data transfer rate of 1 mebibyte (MiB) per thread is recommended for remote cloning operations. The data transfer rate for a remote cloning operation is controlled by the clone_max_data_bandwidth variable.

  • clone_max_data_bandwidth

    Command-Line Format --clone-max-data-bandwidth
    System Variable clone_max_data_bandwidth
    Scope Global
    Dynamic Yes
    SET_VAR Hint Applies No
    Type Integer
    Default Value 0
    Minimum Value 0
    Maximum Value 1048576
    Unit miB/second

    Defines the maximum data transfer rate in mebibytes (MiB) per second for a remote cloning operation. This variable helps manage the performance impact of a cloning operation. A limit should be set only when donor disk I/O bandwidth is saturated, affecting performance. A value of 0 means unlimited, which permits cloning operations to run at the highest possible data transfer rate. This setting is only applicable to the recipient MySQL server instance.

    The minimum data transfer rate is 1 MiB per second, per thread. For example, if there are 8 threads, the minimum transfer rate is 8 MiB per second. The clone_max_concurrency variable controls the maximum number threads spawned for a remote cloning operation.

    The requested data transfer rate specified by clone_max_data_bandwidth may differ from the actual data transfer rate reported by the DATA_SPEED column in the performance_schema.clone_progress table. If your cloning operation is not achieving the desired data transfer rate and you have available bandwidth, check I/O usage on the recipient and donor. If there is underutilized bandwidth, I/O is the next mostly likely bottleneck.

  • clone_max_network_bandwidth

    Command-Line Format --clone-max-network-bandwidth
    System Variable clone_max_network_bandwidth
    Scope Global
    Dynamic Yes
    SET_VAR Hint Applies No
    Type Integer
    Default Value 0
    Minimum Value 0
    Maximum Value 1048576
    Unit miB/second

    Specifies the maximum approximate network transfer rate in mebibytes (MiB) per second for a remote cloning operation. This variable can be used to manage the performance impact of a cloning operation on network bandwidth. It should be set only when network bandwidth is saturated, affecting performance on the donor instance. A value of 0 means unlimited, which permits cloning at the highest possible data transfer rate over the network, providing the best performance. This setting is only applicable to the recipient MySQL server instance.

  • clone_ssl_ca

    Command-Line Format --clone-ssl-ca=file_name
    System Variable clone_ssl_ca
    Scope Global
    Dynamic Yes
    SET_VAR Hint Applies No
    Type File name
    Default Value empty string

    Specifies the path to the certificate authority (CA) file. Used to configure an encrypted connection for a remote cloning operation. This setting configured on the recipient and used when connecting to the donor.

  • clone_ssl_cert

    Command-Line Format --clone-ssl-cert=file_name
    System Variable clone_ssl_cert
    Scope Global
    Dynamic Yes
    SET_VAR Hint Applies No
    Type File name
    Default Value empty string

    Specifies the path to the public key certificate. Used to configure an encrypted connection for a remote cloning operation. This setting configured on the recipient and used when connecting to the donor.

  • clone_ssl_key

    Command-Line Format --clone-ssl-key=file_name
    System Variable clone_ssl_key
    Scope Global
    Dynamic Yes
    SET_VAR Hint Applies No
    Type File name
    Default Value empty string

    Specifies the path to the private key file. Used to configure an encrypted connection for a remote cloning operation. This setting configured on the recipient and used when connecting to the donor.

  • clone_valid_donor_list

    Command-Line Format --clone-valid-donor-list=value
    System Variable clone_valid_donor_list
    Scope Global
    Dynamic Yes
    SET_VAR Hint Applies No
    Type String
    Default Value NULL

    Defines valid donor host addresses for remote cloning operations. This setting is applied on the recipient MySQL server instance. A comma-separated list of values is permitted in the following format: HOST1:PORT1,HOST2:PORT2,HOST3:PORT3. Spaces are not permitted.

    The clone_valid_donor_list variable adds a layer of security by providing control over the sources of cloned data. The privilege required to configure clone_valid_donor_list is different from the privilege required to execute remote cloning operations, which permits assigning those responsibilities to different roles. Configuring clone_valid_donor_list requires the SYSTEM_VARIABLES_ADMIN privilege, whereas executing a remote cloning operation requires the CLONE_ADMIN privilege.

    Internet Protocol version 6 (IPv6) address format is not supported. Internet Protocol version 6 (IPv6) address format is not supported. An alias to the IPv6 address can be used instead. An IPv4 address can be used as is.