Documentation Home
MySQL 5.5 Reference Manual
Related Documentation Download this Manual
PDF (US Ltr) - 27.0Mb
PDF (A4) - 27.0Mb
PDF (RPM) - 26.1Mb
HTML Download (TGZ) - 6.6Mb
HTML Download (Zip) - 6.6Mb
HTML Download (RPM) - 5.6Mb
Man Pages (TGZ) - 168.0Kb
Man Pages (Zip) - 274.6Kb
Info (Gzip) - 2.5Mb
Info (Zip) - 2.5Mb
Excerpts from this Manual

MySQL 5.5 Reference Manual  /  ...  /  The BLOB and TEXT Types

11.4.3 The BLOB and TEXT Types

A BLOB is a binary large object that can hold a variable amount of data. The four BLOB types are TINYBLOB, BLOB, MEDIUMBLOB, and LONGBLOB. These differ only in the maximum length of the values they can hold. The four TEXT types are TINYTEXT, TEXT, MEDIUMTEXT, and LONGTEXT. These correspond to the four BLOB types and have the same maximum lengths and storage requirements. See Section 11.7, “Data Type Storage Requirements”.

BLOB values are treated as binary strings (byte strings). They have the binary character set and collation, and comparison and sorting are based on the numeric values of the bytes in column values. TEXT values are treated as nonbinary strings (character strings). They have a character set other than binary, and values are sorted and compared based on the collation of the character set.

If strict SQL mode is not enabled and you assign a value to a BLOB or TEXT column that exceeds the column's maximum length, the value is truncated to fit and a warning is generated. For truncation of nonspace characters, you can cause an error to occur (rather than a warning) and suppress insertion of the value by using strict SQL mode. See Section 5.1.8, “Server SQL Modes”.

Truncation of excess trailing spaces from values to be inserted into TEXT columns always generates a warning, regardless of the SQL mode.

For TEXT and BLOB columns, there is no padding on insert and no bytes are stripped on select.

If a TEXT column is indexed, index entry comparisons are space-padded at the end. This means that, if the index requires unique values, duplicate-key errors will occur for values that differ only in the number of trailing spaces. For example, if a table contains 'a', an attempt to store 'a ' causes a duplicate-key error. This is not true for BLOB columns.

In most respects, you can regard a BLOB column as a VARBINARY column that can be as large as you like. Similarly, you can regard a TEXT column as a VARCHAR column. BLOB and TEXT differ from VARBINARY and VARCHAR in the following ways:

If you use the BINARY attribute with a TEXT data type, the column is assigned the binary (_bin) collation of the column character set.

LONG and LONG VARCHAR map to the MEDIUMTEXT data type. This is a compatibility feature.

MySQL Connector/ODBC defines BLOB values as LONGVARBINARY and TEXT values as LONGVARCHAR.

Because BLOB and TEXT values can be extremely long, you might encounter some constraints in using them:

Each BLOB or TEXT value is represented internally by a separately allocated object. This is in contrast to all other data types, for which storage is allocated once per column when the table is opened.

In some cases, it may be desirable to store binary data such as media files in BLOB or TEXT columns. You may find MySQL's string handling functions useful for working with such data. See Section 12.5, “String Functions”. For security and other reasons, it is usually preferable to do so using application code rather than giving application users the FILE privilege. You can discuss specifics for various languages and platforms in the MySQL Forums (

User Comments
  Posted by Volnei Puttini on June 22, 2007
A pratical example of how write and read images into MySQL tables,
using Trolltech Qt4/C++

This example is for who reads/record images in tables
using fields BLOB.

First: Create a table, for example:
CREATE TABLE picture (

2) To read a image to a QByteArray

QString fileName = "IMAGE.JPG";

QImage image(filaName);
LBL_IMAGE->setPixmap(QPixmap::fromImage(image)); // Put image into QLabel object (optional)

// load image to bytearray
QByteArray ba;
QFile f(fileName);
ba = f.readAll();

// Writing the image into table
QSqlQuery query;
query.prepare( "INSERT INTO picture ( IMAGE ) VALUES (:IMAGE)" );
query.bindValue(":IMAGE", ba);
if( query.lastError().isValid()) {
qDebug() << query.lastError().text();
} else

3) Now, recovery the field with the image

int idx = 1; // The records ID to recover

QSqlQuery query;
query.prepare("SELECT ID, IMAGE FROM picture WHERE ID=:ID");
query.bindValue(":ID", idx);
if( query.lastError().isValid()) {
qDebug() << query.lastError().text();
} else {
QByteArray ba1 = query.value(1).toByteArray();
QPixmap pic;
pic.loadFromData( ba1);

// Show the image into a QLabel object

This example works fine and I use it frequently.


  Posted by Bryce Nesbitt on April 4, 2008
On MS Windows the "no DEFAULT" rule is an error, while on other platforms it is often a warning. While not a bug, it's possible to get trapped by this if you write code on a lenient platform, and later run it on a strict platform:

mysql> show warnings;
| Level | Code | Message |
| Warning | 1101 | BLOB/TEXT column 'abcdef' can't have a default value |

  Posted by on April 27, 2008
I struggled for some time to utilize mysql's blob column to store images and especially large files with good performance in and out. I found this tutorials implementation very useful:
  Posted by Rajiv Kapoor on December 9, 2008
Following way we can store blob data in a table using MYSQL:
  Posted by Kristian Köhntopp on October 2, 2009
Simon Mudd is right, but there are several things that must come together to make this bad:

1. You must have a query that has an EXPLAIN which includes 'using temporary'. If 'using temporary' is shown in your EXPLAIN plan, then a temporary table is being created either in MEMORY or as MyISAM table on disk. MySQL prefers MEMORY, but there are situations where it is forced to go to disk.

2. You must have a query which includes any TEXT or BLOB type in the column list, that is in the part of the query between SELECT and FROM. The actual size of the column or its content do not matter - even a TINYTEXT that is empty is enough.

Since the MEMORY storage engine cannot represent any TEXT or BLOB types at all, this forces MySQL to realize the table as an on-disk MyISAM table.

How to diagnose:

1. Run show session status:

kris@localhost [test_world]> show session status like 'Created_tmp%tables';
| Variable_name | Value |
| Created_tmp_disk_tables | 3 |
| Created_tmp_tables | 7 |
2 rows in set (0.00 sec)

2. Execute the query. Make sure it is not cached:

kris@localhost [test_world]> select sql_no_cache * from kris group by countrycode order by population;
232 rows in set (0.00 sec)

3. Check show status again:

kris@localhost [test_world]> show session status like 'Created_tmp%tables';
| Variable_name | Value |
| Created_tmp_disk_tables | 4 |
| Created_tmp_tables | 8 |
2 rows in set (0.00 sec)

As you can see the Created_tmp_tables counter increased by one (in MySQL 5.0 is increases by two because the SHOW STATUS itself creates an in-memory tmp table which is being counted). If the table goes to disk as MyISAM instead of being a MEMORY Table, Created_tmp_disk_tables is also incremented by one, as seen here. This is slow.

The test table I used is using the MySQL world database and

mysql> create table kris as select * from City;
mysql> alter table kris modify column name text;
mysql> alter table kris add primary key (id);

The test query shown above is 'using temporary' because I group by one column and order by another, forcing MySQL to use a temporary table.

Had I been using the same query on the original City table from the world database, a tmp table would have been needed as well, but it would have been created as a MEMORY table as the original name column is a CHAR(35). So Created_tmp_tables is being bumped by one, but Created_tmp_disk_tables is not.

Had I been leaving off the SQL_NO_CACHE, the query cache would have been catching repeated executions of the same query in testing and the counters would not have been moving at all except for the very first test.

  Posted by TM Sch on April 21, 2012
This was my first time working with BLOB data, but I first wanted to test WITHOUT an intermediary programming language. (That would add another source of errors, I think.) I had a hard time trying to test inserting and selecting.

Probably this is old had to professional programmers, but my book's limited discussion of BLOB data was about the data type, not how to use it.

Newbies, to make your life easier, here's a quick how-to insert/return blob data at the command line:

1) Got errors about NULL value in NOT NULL column. Permissions were fixed as far as I could see (have MySQL installed as a service on Windows 7, and all users had at least read/execute permissions). I did not see any "max_allowed_packet" or "secure_file_priv" already existing in the "my.ini" file.

SOLUTION: In addition to proper permissions, I need to use "/", not "\" in path to blob data (which was a picture). Note, this worked properly even for a non-relative path starting at the drive letter! :D

Meanwhile, I tried moving the photo to a new directory to solve my so-called "permissions" problem, but that wasn't the problem. Truly, I was getting Error 1048 was because I needed to use forward slashes! (You will get Error 1048 if you try to insert a NULL value, or when using LOAD_FILE and it can't read it for any reason...not always permissions.)

2) After solving #1, SELECT statement seemed to confirm the picture is indeed stored in the table. However, this returned so many unreadable characters that I could not scroll back to see the complete results, and I had to wait a couple minutes until my computer stopped beeping. (Lucky for me, the system didn't crash.)

SOLUTION: use the SUBSTRING() function in the SELECT statement to only return so many characters from that blob field!

** Edited, forgot to use double-backslashes in "Filename" column. **

PhotoID int unsigned not null auto_increment primary key,
Filename varchar(255) not null unique,
Caption varchar(255) not null,
Photo longblob not null);


INSERT INTO Photos values (
'Walk of Champions official logo',

SELECT PhotoID, Filename, Caption, SUBSTRING(Photo,1,20) from Photos;
Sign Up Login You must be logged in to post a comment.