Documentation Home
MySQL 8.4 Reference Manual
Related Documentation Download this Manual
PDF (US Ltr) - 40.0Mb
PDF (A4) - 40.1Mb
Man Pages (TGZ) - 258.6Kb
Man Pages (Zip) - 365.6Kb
Info (Gzip) - 4.0Mb
Info (Zip) - 4.0Mb


MySQL 8.4 Reference Manual  /  ...  /  ndb_waiter — Wait for NDB Cluster to Reach a Given Status

25.5.31 ndb_waiter — Wait for NDB Cluster to Reach a Given Status

ndb_waiter repeatedly (each 100 milliseconds) prints out the status of all cluster data nodes until either the cluster reaches a given status or the --timeout limit is exceeded, then exits. By default, it waits for the cluster to achieve STARTED status, in which all nodes have started and connected to the cluster. This can be overridden using the --no-contact and --not-started options.

The node states reported by this utility are as follows:

  • NO_CONTACT: The node cannot be contacted.

  • UNKNOWN: The node can be contacted, but its status is not yet known. Usually, this means that the node has received a START or RESTART command from the management server, but has not yet acted on it.

  • NOT_STARTED: The node has stopped, but remains in contact with the cluster. This is seen when restarting the node using the management client's RESTART command.

  • STARTING: The node's ndbd process has started, but the node has not yet joined the cluster.

  • STARTED: The node is operational, and has joined the cluster.

  • SHUTTING_DOWN: The node is shutting down.

  • SINGLE USER MODE: This is shown for all cluster data nodes when the cluster is in single user mode.

Options that can be used with ndb_waiter are shown in the following table. Additional descriptions follow the table.

Usage

ndb_waiter [-c connection_string]

Additional Options

  • --character-sets-dir

    Command-Line Format --character-sets-dir=path

    Directory containing character sets.

  • --connect-retries

    Command-Line Format --connect-retries=#
    Type Integer
    Default Value 12
    Minimum Value 0
    Maximum Value 12

    Number of times to retry connection before giving up.

  • --connect-retry-delay

    Command-Line Format --connect-retry-delay=#
    Type Integer
    Default Value 5
    Minimum Value 0
    Maximum Value 5

    Number of seconds to wait between attempts to contact management server.

  • --connect-string

    Command-Line Format --connect-string=connection_string
    Type String
    Default Value [none]

    Same as --ndb-connectstring.

  • --core-file

    Command-Line Format --core-file

    Write core file on error; used in debugging.

  • --defaults-extra-file

    Command-Line Format --defaults-extra-file=path
    Type String
    Default Value [none]

    Read given file after global files are read.

  • --defaults-file

    Command-Line Format --defaults-file=path
    Type String
    Default Value [none]

    Read default options from given file only.

  • --defaults-group-suffix

    Command-Line Format --defaults-group-suffix=string
    Type String
    Default Value [none]

    Also read groups with concat(group, suffix).

  • --login-path

    Command-Line Format --login-path=path
    Type String
    Default Value [none]

    Read given path from login file.

  • --no-login-paths

    Command-Line Format --no-login-paths

    Skips reading options from the login path file.

  • --help

    Command-Line Format --help

    Display help text and exit.

  • --ndb-connectstring

    Command-Line Format --ndb-connectstring=connection_string
    Type String
    Default Value [none]

    Set connection string for connecting to ndb_mgmd. Syntax: [nodeid=id;][host=]hostname[:port]. Overrides entries in NDB_CONNECTSTRING and my.cnf.

  • --ndb-mgm-tls

    Command-Line Format --ndb-mgm-tls=level
    Type Enumeration
    Default Value relaxed
    Valid Values

    relaxed

    strict

    Sets the level of TLS support required to connect to the management server; one of relaxed or strict. relaxed (the default) means that a TLS connection is attempted, but success is not required; strict means that TLS is required to connect.

  • --ndb-mgmd-host

    Command-Line Format --ndb-mgmd-host=connection_string
    Type String
    Default Value [none]

    Same as --ndb-connectstring.

  • --ndb-nodeid

    Command-Line Format --ndb-nodeid=#
    Type Integer
    Default Value [none]

    Set node ID for this node, overriding any ID set by --ndb-connectstring.

  • --ndb-optimized-node-selection

    Command-Line Format --ndb-optimized-node-selection

    Enable optimizations for selection of nodes for transactions. Enabled by default; use --skip-ndb-optimized-node-selection to disable.

  • --ndb-tls-search-path

    Command-Line Format --ndb-tls-search-path=list
    Type Path name
    Default Value (Unix) $HOME/ndb-tls
    Default Value (Windows) $HOMEDIR/ndb-tls

    Specify a list of directories to search for a CA file. On Unix platforms, the directory names are separated by colons (:); on Windows systems, the semicolon character (;) is used as the separator. A directory reference may be relative or absolute; it may contain one or more environment variables, each denoted by a prefixed dollar sign ($), and expanded prior to use.

    Searching begins with the leftmost named directory and proceeds from left to right until a file is found. An empty string denotes an empty search path, which causes all searches to fail. A string consisting of a single dot (.) indicates that the search path limited to the current working directory.

    If no search path is supplied, the compiled-in default value is used. This value depends on the platform used: On Windows, this is \ndb-tls; on other platforms (including Linux), it is $HOME/ndb-tls. This can be overridden by compiling NDB Cluster using -DWITH_NDB_TLS_SEARCH_PATH.

  • --no-contact, -n

    Instead of waiting for the STARTED state, ndb_waiter continues running until the cluster reaches NO_CONTACT status before exiting.

  • --no-defaults

    Command-Line Format --no-defaults

    Do not read default options from any option file other than login file.

  • --not-started

    Instead of waiting for the STARTED state, ndb_waiter continues running until the cluster reaches NOT_STARTED status before exiting.

  • --nowait-nodes=list

    When this option is used, ndb_waiter does not wait for the nodes whose IDs are listed. The list is comma-delimited; ranges can be indicated by dashes, as shown here:

    $> ndb_waiter --nowait-nodes=1,3,7-9
    Important

    Do not use this option together with the --wait-nodes option.

  • --print-defaults

    Command-Line Format --print-defaults

    Print program argument list and exit.

  • --timeout=seconds, -t seconds

    Time to wait. The program exits if the desired state is not achieved within this number of seconds. The default is 120 seconds (1200 reporting cycles).

  • --single-user

    The program waits for the cluster to enter single user mode.

  • --usage

    Command-Line Format --usage

    Display help text and exit; same as --help.

  • --verbose

    Command-Line Format --verbose=#
    Type Integer
    Default Value 2
    Minimum Value 0
    Maximum Value 2

    Controls verbosity level of printout. Possible levels and their effects are listed here:

    • 0: Do not print (return exit code only; see following for exit codes).

    • 1: Print final connection status only.

    • 2: Print status each time it is checked.

      This is the same behavior as in versions of NDB Cluster previous to 8.4.

    Exit codes returned by ndb_waiter are listed here, with their meanings:

    • 0: Success.

    • 1: Wait timed out.

    • 2: Parameter error, such as an invalid node ID.

    • 3: Failed to connect to the management server.

  • --version

    Command-Line Format --version

    Display version information and exit.

  • --wait-nodes=list, -w list

    When this option is used, ndb_waiter waits only for the nodes whose IDs are listed. The list is comma-delimited; ranges can be indicated by dashes, as shown here:

    $> ndb_waiter --wait-nodes=2,4-6,10
    Important

    Do not use this option together with the --nowait-nodes option.

Sample Output.  Shown here is the output from ndb_waiter when run against a 4-node cluster in which two nodes have been shut down and then started again manually. Duplicate reports (indicated by ...) are omitted.

$> ./ndb_waiter -c localhost

Connecting to mgmsrv at (localhost)
State node 1 STARTED
State node 2 NO_CONTACT
State node 3 STARTED
State node 4 NO_CONTACT
Waiting for cluster enter state STARTED

...

State node 1 STARTED
State node 2 UNKNOWN
State node 3 STARTED
State node 4 NO_CONTACT
Waiting for cluster enter state STARTED

...

State node 1 STARTED
State node 2 STARTING
State node 3 STARTED
State node 4 NO_CONTACT
Waiting for cluster enter state STARTED

...

State node 1 STARTED
State node 2 STARTING
State node 3 STARTED
State node 4 UNKNOWN
Waiting for cluster enter state STARTED

...

State node 1 STARTED
State node 2 STARTING
State node 3 STARTED
State node 4 STARTING
Waiting for cluster enter state STARTED

...

State node 1 STARTED
State node 2 STARTED
State node 3 STARTED
State node 4 STARTING
Waiting for cluster enter state STARTED

...

State node 1 STARTED
State node 2 STARTED
State node 3 STARTED
State node 4 STARTED
Waiting for cluster enter state STARTED
Note

If no connection string is specified, then ndb_waiter tries to connect to a management on localhost, and reports Connecting to mgmsrv at (null).