The binary log contains “events” that describe
database changes such as table creation operations or changes to
table data. It also contains events for statements that
potentially could have made changes (for example, a
DELETE which matched no rows),
unless row-based logging is used. The binary log also contains
information about how long each statement took that updated data.
The binary log has two important purposes:
For replication, the binary log on a replication source server provides a record of the data changes to be sent to replicas. The source sends the information contained in its binary log to its replicas, which reproduce those transactions to make the same data changes that were made on the source. See Section 17.2, “Replication Implementation”.
Certain data recovery operations require use of the binary log. After a backup has been restored, the events in the binary log that were recorded after the backup was made are re-executed. These events bring databases up to date from the point of the backup. See Section 7.5, “Point-in-Time (Incremental) Recovery”.
The binary log is not used for statements such as
SHOW that do not modify data. To
log all statements (for example, to identify a problem query), use
the general query log. See Section 5.4.3, “The General Query Log”.
Running a server with binary logging enabled makes performance slightly slower. However, the benefits of the binary log in enabling you to set up replication and for restore operations generally outweigh this minor performance decrement.
The binary log is resilient to unexpected halts. Only complete events or transactions are logged or read back.
Passwords in statements written to the binary log are rewritten by the server not to occur literally in plain text. See also Section 184.108.40.206, “Passwords and Logging”.
MySQL binary log files and relay log files can be encrypted,
helping to protect these files and the potentially sensitive data
contained in them from being misused by outside attackers, and
also from unauthorized viewing by users of the operating system
where they are stored. You enable encryption on a MySQL server by
system variable to
ON. For more information,
see Section 17.3.2, “Encrypting Binary Log Files and Relay Log Files”.
The following discussion describes some of the server options and variables that affect the operation of binary logging. For a complete list, see Section 220.127.116.11, “Binary Logging Options and Variables”.
Binary logging is enabled by default (the
log_bin system variable is set to
ON). The exception is if you use mysqld to
initialize the data directory manually by invoking it with the
--initialize-insecure option, when
binary logging is disabled by default, but can be enabled by
To disable binary logging, you can specify the
option at startup. If either of these options is specified and
--log-bin is also specified, the
option specified later takes precedence.
options require binary logging. If you disable binary logging,
either omit these options, or specify
disables these options by default when
is specified. If you specify
a warning or error message is issued.
option is used to specify the base name for binary log files. If
you do not supply the
--log-bin option, MySQL
binlog as the default base name for the
binary log files. For compatibility with earlier releases, if you
--log-bin option with no string or
with an empty string, the base name defaults to
using the name of the host machine. It is recommended that you
specify a base name, so that if the host name changes, you can
easily continue to use the same binary log file names (see
Section B.3.7, “Known Issues in MySQL”). If you supply an extension in the
log name (for example,
the extension is silently removed and ignored.
mysqld appends a numeric extension to the binary log base name to generate binary log file names. The number increases each time the server creates a new log file, thus creating an ordered series of files. The server creates a new file in the series each time any of the following events occurs:
The server is started or restarted
The server flushes the logs.
The size of the current log file reaches
A binary log file may become larger than
max_binlog_size if you are using
large transactions because a transaction is written to the file in
one piece, never split between files.
To keep track of which binary log files have been used,
mysqld also creates a binary log index file
that contains the names of the binary log files. By default, this
has the same base name as the binary log file, with the extension
'.index'. You can change the name of the binary
log index file with the
option. You should not manually edit this file while
mysqld is running; doing so would confuse
The term “binary log file” generally denotes an individual numbered file containing database events. The term “binary log” collectively denotes the set of numbered binary log files plus the index file.
The default location for binary log files and the binary log index
file is the data directory. You can use the
--log-bin option to specify an
alternative location, by adding a leading absolute path name to
the base name to specify a different directory. When the server
reads an entry from the binary log index file, which tracks the
binary log files that have been used, it checks whether the entry
contains a relative path. If it does, the relative part of the
path is replaced with the absolute path set using the
--log-bin option. An absolute path
recorded in the binary log index file remains unchanged; in such a
case, the index file must be edited manually to enable a new path
or paths to be used. The binary log file base name and any
specified path are available as the
log_bin_basename system variable.
In MySQL 5.7, a server ID had to be specified when binary logging
was enabled, or the server would not start. In MySQL
system variable is set to 1 by default. The server can be started
with this default ID when binary logging is enabled, but an
informational message is issued if you do not specify a server ID
explicitly using the
system variable. For servers that are used in a replication
topology, you must specify a unique nonzero server ID for each
A client that has privileges sufficient to set restricted session
system variables (see
Section 18.104.22.168, “System Variable Privileges”) can disable binary
logging of its own statements by using a
By default, the server logs the length of the event as well as the
event itself and uses this to verify that the event was written
correctly. You can also cause the server to write checksums for
the events by setting the
binlog_checksum system variable.
When reading back from the binary log, the source uses the event
length by default, but can be made to use checksums if available
replication I/O (receiver) thread on the replica also verifies
events received from the source. You can cause the replication SQL
(applier) thread to use checksums if available when reading from
the relay log by enabling
The format of the events recorded in the binary log is dependent on the binary logging format. Three format types are supported: row-based logging, statement-based logging and mixed-base logging. The binary logging format used depends on the MySQL version. For descriptions of the logging formats, see Section 22.214.171.124, “Binary Logging Formats”.
The server evaluates the
--binlog-ignore-db options in the
same way as it does the
--replicate-ignore-db options. For
information about how this is done, see
Section 126.96.36.199, “Evaluation of Database-Level Replication and Binary Logging Options”.
A replica is started with
log_replica_updates enabled by
default, meaning that the replica writes to its own binary log any
data modifications that are received from the source. The binary
log must be enabled for this setting to work (see
Section 188.8.131.52, “Replica Server Options and Variables”). This setting
enables the replica to act as a source to other replicas.
You can delete all binary log files with the
RESET MASTER statement, or a subset
of them with
PURGE BINARY LOGS. See
Section 184.108.40.206, “RESET Statement”, and Section 220.127.116.11, “PURGE BINARY LOGS Statement”.
If you are using MySQL Replication, you should not delete old
binary log files on the source until you are sure that no replica
still needs to use them. For example, if your replicas never run
more than three days behind, once a day you can execute
mysqladmin flush-logs binary on the source and
then remove any logs that are more than three days old. You can
remove the files manually, but it is preferable to use
PURGE BINARY LOGS, which also
safely updates the binary log index file for you (and which can
take a date argument). See Section 18.104.22.168, “PURGE BINARY LOGS Statement”.
You can display the contents of binary log files with the mysqlbinlog utility. This can be useful when you want to reprocess statements in the log for a recovery operation. For example, you can update a MySQL server from the binary log as follows:
$> mysqlbinlog log_file | mysql -h server_name
mysqlbinlog also can be used to display the contents of the relay log file on a replica, because they are written using the same format as binary log files. For more information on the mysqlbinlog utility and how to use it, see Section 4.6.9, “mysqlbinlog — Utility for Processing Binary Log Files”. For more information about the binary log and recovery operations, see Section 7.5, “Point-in-Time (Incremental) Recovery”.
Binary logging is done immediately after a statement or transaction completes but before any locks are released or any commit is done. This ensures that the log is logged in commit order.
Updates to nontransactional tables are stored in the binary log immediately after execution.
Within an uncommitted transaction, all updates
INSERT) that change transactional
tables such as
InnoDB tables are cached until a
COMMIT statement is received by the
server. At that point, mysqld writes the entire
transaction to the binary log before the
COMMIT is executed.
Modifications to nontransactional tables cannot be rolled back. If
a transaction that is rolled back includes modifications to
nontransactional tables, the entire transaction is logged with a
statement at the end to ensure that the modifications to those
tables are replicated.
When a thread that handles the transaction starts, it allocates a
buffer statements. If a statement is bigger than this, the thread
opens a temporary file to store the transaction. The temporary
file is deleted when the thread ends. If binary log encryption is
active on the server, the temporary file is encrypted.
variable shows the number of transactions that used this buffer
(and possibly a temporary file) for storing statements. The
variable shows how many of those transactions actually had to use
a temporary file. These two variables can be used for tuning
binlog_cache_size to a large
enough value that avoids the use of temporary files.
variable (default 4GB, which is also the maximum) can be used to
restrict the total size used to cache a multiple-statement
transaction. If a transaction is larger than this many bytes, it
fails and rolls back. The minimum value is 4096.
If you are using the binary log and row based logging, concurrent
inserts are converted to normal inserts for
SELECT statements. This is done to ensure that you can
re-create an exact copy of your tables by applying the log during
a backup operation. If you are using statement-based logging, the
original statement is written to the log.
The binary log format has some known limitations that can affect recovery from backups. See Section 17.5.1, “Replication Features and Issues”.
Binary logging for stored programs is done as described in Section 25.7, “Stored Program Binary Logging”.
Note that the binary log format differs in MySQL 8.1 from previous versions of MySQL, due to enhancements in replication. See Section 17.5.2, “Replication Compatibility Between MySQL Versions”.
If the server is unable to write to the binary log, flush binary
log files, or synchronize the binary log to disk, the binary log
on the replication source server can become inconsistent and
replicas can lose synchronization with the source. The
variable controls the action taken if an error of this type is
encountered with the binary log.
The default setting,
ABORT_SERVER, makes the server halt binary logging and shut down. At this point, you can identify and correct the cause of the error. On restart, recovery proceeds as in the case of an unexpected server halt (see Section 17.4.2, “Handling an Unexpected Halt of a Replica”).
IGNORE_ERRORprovides backward compatibility with older versions of MySQL. With this setting, the server continues the ongoing transaction and logs the error, then halts binary logging, but continues to perform updates. At this point, you can identify and correct the cause of the error. To resume binary logging,
log_binmust be enabled again, which requires a server restart. Only use this option if you require backward compatibility, and the binary log is non-essential on this MySQL server instance. For example, you might use the binary log only for intermittent auditing or debugging of the server, and not use it for replication from the server or rely on it for point-in-time restore operations.
By default, the binary log is synchronized to disk at each write
sync_binlog was not enabled, and
the operating system or machine (not only the MySQL server)
crashed, there is a chance that the last statements of the binary
log could be lost. To prevent this, enable the
sync_binlog system variable to
synchronize the binary log to disk after every
N commit groups. See
Section 5.1.8, “Server System Variables”. The safest value for
sync_binlog is 1 (the default),
but this is also the slowest.
In earlier MySQL releases, there was a chance of inconsistency
between the table content and binary log content if a crash
occurred, even with
set to 1. For example, if you are using
tables and the MySQL server processes a
COMMIT statement, it writes many
prepared transactions to the binary log in sequence, synchronizes
the binary log, and then commits the transaction into
InnoDB. If the server unexpectedly exited
between those two operations, the transaction would be rolled back
InnoDB at restart but still exist in the
binary log. Such an issue was resolved in previous releases by
InnoDB support for two-phase commit in
XA transactions. In MySQL 8.1,
InnoDB support for two-phase commit in XA
transactions is always enabled.
InnoDB support for two-phase commit in XA
transactions ensures that the binary log and
InnoDB data files are synchronized. However,
the MySQL server should also be configured to synchronize the
binary log and the
InnoDB logs to disk before
committing the transaction. The
InnoDB logs are
synchronized by default, and
ensures the binary log is synchronized. The effect of implicit
InnoDB support for two-phase commit in XA
sync_binlog=1 is that at
restart after a crash, after doing a rollback of transactions, the
MySQL server scans the latest binary log file to collect
xid values and calculate
the last valid position in the binary log file. The MySQL server
InnoDB to complete any prepared
transactions that were successfully written to the to the binary
log, and truncates the binary log to the last valid position. This
ensures that the binary log reflects the exact data of
InnoDB tables, and therefore the replica
remains in synchrony with the source because it does not receive a
statement which has been rolled back.
If the MySQL server discovers at crash recovery that the binary
log is shorter than it should have been, it lacks at least one
InnoDB transaction. This
should not happen if
sync_binlog=1 and the
disk/file system do an actual sync when they are requested to
(some do not), so the server prints an error message
binary log . In this case, this binary log is not
correct and replication should be restarted from a fresh snapshot
of the source's data.
file_name is shorter than
its expected size
The session values of the following system variables are written to the binary log and honored by the replica when parsing the binary log: