Question

A.4.1.

Does MySQL support stored procedures and functions?

Answer 1

Yes. MySQL supports two types of stored routines, stored procedures, and stored functions.

Answer 2

See Section 27.2, “Using Stored Routines”.

Answer 3

Yes. See https://forums.mysql.com/list.php?98.

Answer 4

Unfortunately, the official specifications are not freely available (ANSI makes them available for purchase). However, there are books, such as SQL-99 Complete, Really by Peter Gulutzan and Trudy Pelzer, that provide a comprehensive overview of the standard, including coverage of stored procedures.

Answer 5

It is always good practice to use a clear naming scheme for your stored routines. You can manage stored procedures with CREATE [FUNCTION|PROCEDURE], ALTER [FUNCTION|PROCEDURE], DROP [FUNCTION|PROCEDURE], and SHOW CREATE [FUNCTION|PROCEDURE]. You can obtain information about existing stored procedures using the ROUTINES table in the INFORMATION_SCHEMA database (see Section 28.3.30, “The INFORMATION_SCHEMA ROUTINES Table”).

Answer 6

Yes. For a database named dbname, use this query on the INFORMATION_SCHEMA.ROUTINES table:

SELECT ROUTINE_TYPE, ROUTINE_NAME
    FROM INFORMATION_SCHEMA.ROUTINES
    WHERE ROUTINE_SCHEMA='dbname';

For more information, see Section 28.3.30, “The INFORMATION_SCHEMA ROUTINES Table”.

The body of a stored routine can be viewed using SHOW CREATE FUNCTION (for a stored function) or SHOW CREATE PROCEDURE (for a stored procedure). See Section 15.7.7.10, “SHOW CREATE PROCEDURE Statement”, for more information.

Answer 7

Stored procedures are stored in the mysql.routines and mysql.parameters tables, which are part of the data dictionary. You cannot access these tables directly. Instead, query the INFORMATION_SCHEMA ROUTINES and PARAMETERS tables. See Section 28.3.30, “The INFORMATION_SCHEMA ROUTINES Table”, and Section 28.3.20, “The INFORMATION_SCHEMA PARAMETERS Table”.

You can also use SHOW CREATE FUNCTION to obtain information about stored functions, and SHOW CREATE PROCEDURE to obtain information about stored procedures. See Section 15.7.7.10, “SHOW CREATE PROCEDURE Statement”.

Answer 8

No. This is not supported in MySQL.

Answer 9

A stored procedure can execute an SQL statement, such as an UPDATE, that causes a trigger to activate.

Answer 10

Yes. A stored procedure can access one or more tables as required.

Answer 11

Yes. MySQL implements the SQL standard SIGNAL and RESIGNAL statements. See Section 15.6.7, “Condition Handling”.

Answer 12

MySQL implements HANDLER definitions according to the SQL standard. See Section 15.6.7.2, “DECLARE ... HANDLER Statement”, for details.

Answer 13

Stored procedures can, but stored functions cannot. If you perform an ordinary SELECT inside a stored procedure, the result set is returned directly to the client. You need to use the MySQL 4.1 (or higher) client/server protocol for this to work. This means that, for example, in PHP, you need to use the mysqli extension rather than the old mysql extension.

Answer 14

There is no equivalent in MySQL.

Answer 15

Cursors are only available inside stored procedures.

Answer 16

Cursors are only available inside stored procedures. However, if you do not open a cursor on a SELECT, the result is sent directly to the client. You can also SELECT INTO variables. See Section 15.2.13, “SELECT Statement”.

Answer 17

Yes, you can do this in a stored procedure, but not in a stored function. If you perform an ordinary SELECT inside a stored procedure, the result set is returned directly to the client. You must use the MySQL 4.1 (or above) client/server protocol for this to work. This means that, for example, in PHP, you need to use the mysqli extension rather than the old mysql extension.

Answer 18

Yes. However, you cannot perform transactional operations within a stored function.

Answer 19

Yes, standard actions carried out in stored procedures and functions are replicated from a replication source server to a replica. There are a few limitations that are described in detail in Section 27.8, “Stored Program Binary Logging”.

Answer 20

Yes, creation of stored procedures and functions carried out through normal DDL statements on a replication source server are replicated to a replica, so that the objects exist on both servers. ALTER and DROP statements for stored procedures and functions are also replicated.

Answer 21

MySQL records each DML event that occurs in a stored procedure and replicates those individual actions to a replica. The actual calls made to execute stored procedures are not replicated.

Stored functions that change data are logged as function invocations, not as the DML events that occur inside each function.

Answer 22

Yes. Because a replica has authority to execute any statement read from a source's binary log, special security constraints exist for using stored functions with replication. If replication or binary logging in general (for the purpose of point-in-time recovery) is active, then MySQL DBAs have two security options open to them:

Any user wishing to create stored functions must be granted the SUPER privilege.
Alternatively, a DBA can set the log_bin_trust_function_creators system variable to 1, which enables anyone with the standard CREATE ROUTINE privilege to create stored functions.

Answer 23

Nondeterministic (random) or time-based actions embedded in stored procedures may not replicate properly. By their very nature, randomly produced results are not predictable and cannot be exactly reproduced; therefore, random actions replicated to a replica do not mirror those performed on a source. Declaring stored functions to be DETERMINISTIC or setting the log_bin_trust_function_creators system variable to 0 keeps random operations producing random values from being invoked.

In addition, time-based actions cannot be reproduced on a replica because the timing of such actions in a stored procedure is not reproducible through the binary log used for replication. It records only DML events and does not factor in timing constraints.

Finally, nontransactional tables for which errors occur during large DML actions (such as bulk inserts) may experience replication issues in that a source may be partially updated from DML activity, but no updates are done to the replica because of the errors that occurred. A workaround is for a function's DML actions to be carried out with the IGNORE keyword so that updates on the source that cause errors are ignored and updates that do not cause errors are replicated to the replica.

Answer 24

The same limitations that affect replication do affect point-in-time recovery.

Answer 25

You can choose either statement-based replication or row-based replication. The original replication implementation is based on statement-based binary logging. Row-based binary logging resolves the limitations mentioned earlier.

Mixed replication is also available (by starting the server with --binlog-format=mixed). This hybrid form of replication “knows” whether statement-level replication can safely be used, or row-level replication is required.

For additional information, see Section 19.2.1, “Replication Formats”.

A.4.1.	Does MySQL support stored procedures and functions?
	Yes. MySQL supports two types of stored routines, stored procedures, and stored functions.
A.4.2.	Where can I find documentation for MySQL stored procedures and stored functions?
	See Section 27.2, “Using Stored Routines”.
A.4.3.	Is there a discussion forum for MySQL stored procedures?
	Yes. See https://forums.mysql.com/list.php?98.
A.4.4.	Where can I find the ANSI SQL 2003 specification for stored procedures?
	Unfortunately, the official specifications are not freely available (ANSI makes them available for purchase). However, there are books, such as SQL-99 Complete, Really by Peter Gulutzan and Trudy Pelzer, that provide a comprehensive overview of the standard, including coverage of stored procedures.
A.4.5.	How do you manage stored routines?
	It is always good practice to use a clear naming scheme for your stored routines. You can manage stored procedures with `CREATE [FUNCTION\|PROCEDURE]`, `ALTER [FUNCTION\|PROCEDURE]`, `DROP [FUNCTION\|PROCEDURE]`, and `SHOW CREATE [FUNCTION\|PROCEDURE]`. You can obtain information about existing stored procedures using the `ROUTINES` table in the `INFORMATION_SCHEMA` database (see Section 28.3.30, “The INFORMATION_SCHEMA ROUTINES Table”).
A.4.6.	Is there a way to view all stored procedures and stored functions in a given database?
	Yes. For a database named `dbname`, use this query on the `INFORMATION_SCHEMA.ROUTINES` table: `SELECT ROUTINE_TYPE, ROUTINE_NAME FROM INFORMATION_SCHEMA.ROUTINES WHERE ROUTINE_SCHEMA='dbname';` For more information, see Section 28.3.30, “The INFORMATION_SCHEMA ROUTINES Table”. The body of a stored routine can be viewed using `SHOW CREATE FUNCTION` (for a stored function) or `SHOW CREATE PROCEDURE` (for a stored procedure). See Section 15.7.7.10, “SHOW CREATE PROCEDURE Statement”, for more information.
A.4.7.	Where are stored procedures stored?
	Stored procedures are stored in the `mysql.routines` and `mysql.parameters` tables, which are part of the data dictionary. You cannot access these tables directly. Instead, query the `INFORMATION_SCHEMA` `ROUTINES` and `PARAMETERS` tables. See Section 28.3.30, “The INFORMATION_SCHEMA ROUTINES Table”, and Section 28.3.20, “The INFORMATION_SCHEMA PARAMETERS Table”. You can also use `SHOW CREATE FUNCTION` to obtain information about stored functions, and `SHOW CREATE PROCEDURE` to obtain information about stored procedures. See Section 15.7.7.10, “SHOW CREATE PROCEDURE Statement”.
A.4.8.	Is it possible to group stored procedures or stored functions into packages?
	No. This is not supported in MySQL.
A.4.9.	Can a stored procedure call another stored procedure?
	Yes.
A.4.10.	Can a stored procedure call a trigger?
	A stored procedure can execute an SQL statement, such as an `UPDATE`, that causes a trigger to activate.
A.4.11.	Can a stored procedure access tables?
	Yes. A stored procedure can access one or more tables as required.
A.4.12.	Do stored procedures have a statement for raising application errors?
	Yes. MySQL implements the SQL standard `SIGNAL` and `RESIGNAL` statements. See Section 15.6.7, “Condition Handling”.
A.4.13.	Do stored procedures provide exception handling?
	MySQL implements `HANDLER` definitions according to the SQL standard. See Section 15.6.7.2, “DECLARE ... HANDLER Statement”, for details.
A.4.14.	Can MySQL stored routines return result sets?
	Stored procedures can, but stored functions cannot. If you perform an ordinary `SELECT` inside a stored procedure, the result set is returned directly to the client. You need to use the MySQL 4.1 (or higher) client/server protocol for this to work. This means that, for example, in PHP, you need to use the `mysqli` extension rather than the old `mysql` extension.
A.4.15.	Is `WITH RECOMPILE` supported for stored procedures?
	No.
A.4.16.	Is there a MySQL equivalent to using `mod_plsql` as a gateway on Apache to talk directly to a stored procedure in the database?
	There is no equivalent in MySQL.
A.4.17.	Can I pass an array as input to a stored procedure?
	No.
A.4.18.	Can I pass a cursor as an `IN` parameter to a stored procedure?
	Cursors are only available inside stored procedures.
A.4.19.	Can I return a cursor as an `OUT` parameter from a stored procedure?
	Cursors are only available inside stored procedures. However, if you do not open a cursor on a `SELECT`, the result is sent directly to the client. You can also `SELECT INTO` variables. See Section 15.2.13, “SELECT Statement”.
A.4.20.	Can I print out a variable's value within a stored routine for debugging purposes?
	Yes, you can do this in a stored procedure, but not in a stored function. If you perform an ordinary `SELECT` inside a stored procedure, the result set is returned directly to the client. You must use the MySQL 4.1 (or above) client/server protocol for this to work. This means that, for example, in PHP, you need to use the `mysqli` extension rather than the old `mysql` extension.
A.4.21.	Can I commit or roll back transactions inside a stored procedure?
	Yes. However, you cannot perform transactional operations within a stored function.
A.4.22.	Do MySQL stored procedures and functions work with replication?
	Yes, standard actions carried out in stored procedures and functions are replicated from a replication source server to a replica. There are a few limitations that are described in detail in Section 27.8, “Stored Program Binary Logging”.
A.4.23.	Are stored procedures and functions created on a replication source server replicated to a replica?
	Yes, creation of stored procedures and functions carried out through normal DDL statements on a replication source server are replicated to a replica, so that the objects exist on both servers. `ALTER` and `DROP` statements for stored procedures and functions are also replicated.
A.4.24.	How are actions that take place inside stored procedures and functions replicated?
	MySQL records each DML event that occurs in a stored procedure and replicates those individual actions to a replica. The actual calls made to execute stored procedures are not replicated. Stored functions that change data are logged as function invocations, not as the DML events that occur inside each function.
A.4.25.	Are there special security requirements for using stored procedures and functions together with replication?
	Yes. Because a replica has authority to execute any statement read from a source's binary log, special security constraints exist for using stored functions with replication. If replication or binary logging in general (for the purpose of point-in-time recovery) is active, then MySQL DBAs have two security options open to them: Any user wishing to create stored functions must be granted the `SUPER` privilege. Alternatively, a DBA can set the `log_bin_trust_function_creators` system variable to 1, which enables anyone with the standard `CREATE ROUTINE` privilege to create stored functions.
A.4.26.	What limitations exist for replicating stored procedure and function actions?
	Nondeterministic (random) or time-based actions embedded in stored procedures may not replicate properly. By their very nature, randomly produced results are not predictable and cannot be exactly reproduced; therefore, random actions replicated to a replica do not mirror those performed on a source. Declaring stored functions to be `DETERMINISTIC` or setting the `log_bin_trust_function_creators` system variable to 0 keeps random operations producing random values from being invoked. In addition, time-based actions cannot be reproduced on a replica because the timing of such actions in a stored procedure is not reproducible through the binary log used for replication. It records only DML events and does not factor in timing constraints. Finally, nontransactional tables for which errors occur during large DML actions (such as bulk inserts) may experience replication issues in that a source may be partially updated from DML activity, but no updates are done to the replica because of the errors that occurred. A workaround is for a function's DML actions to be carried out with the `IGNORE` keyword so that updates on the source that cause errors are ignored and updates that do not cause errors are replicated to the replica.
A.4.27.	Do the preceding limitations affect the ability of MySQL to do point-in-time recovery?
	The same limitations that affect replication do affect point-in-time recovery.
A.4.28.	What is being done to correct the aforementioned limitations?
	You can choose either statement-based replication or row-based replication. The original replication implementation is based on statement-based binary logging. Row-based binary logging resolves the limitations mentioned earlier. Mixed replication is also available (by starting the server with `--binlog-format=mixed`). This hybrid form of replication “knows” whether statement-level replication can safely be used, or row-level replication is required. For additional information, see Section 19.2.1, “Replication Formats”.

A.4 MySQL 9.0 FAQ: Stored Procedures and Functions