Mysys - low level utilities for MySQL

Collaboration diagram for Mysys - low level utilities for MySQL:

Modules
	Mysys time utilities

Files
file	my_sys.h
	Common header for many mysys elements.

Classes
struct	DYNAMIC_ARRAY
struct	MY_TMPDIR
struct	DYNAMIC_STRING
struct	IO_CACHE_SHARE
struct	IO_CACHE
struct	ST_FILE_ID
struct	USED_MEM
	struct for once_alloc (block) More...

Macros
#define	MY_INIT(name)
#define	MYSYS_ERRMSG_SIZE   (512)
	Max length of an error message generated by mysys utilities. More...
#define	MYSYS_STRERROR_SIZE   (128)
#define	MY_FILE_ERROR   ((size_t)-1)
#define	MY_FNABP   2 /* Fatal if not all bytes read/written */
#define	MY_NABP   4 /* Error if not all bytes read/written */
#define	MY_FAE   8 /* Fatal if any error */
#define	MY_WME   16 /* Write message on error */
#define	MY_WAIT_IF_FULL   32 /* Wait and try again if disk full error */
#define	MY_IGNORE_BADFD   32 /* my_sync: ignore 'bad descriptor' errors */
#define	MY_REPORT_WAITING_IF_FULL   64 /* my_write: set status as waiting */
#define	MY_FULL_IO   512 /* For my_read - loop intil I/O is complete */
#define	MY_DONT_CHECK_FILESIZE   128 /* Option to init_io_cache() */
#define	MY_LINK_WARNING   32 /* my_redel() gives warning if links */
#define	MY_COPYTIME   64 /* my_redel() copies time */
#define	MY_DELETE_OLD   256 /* my_create_with_symlink() */
#define	MY_RESOLVE_LINK   128 /* my_realpath(); Only resolve links */
#define	MY_HOLD_ORIGINAL_MODES   128 /* my_copy() holds to file modes */
#define	MY_SEEK_NOT_DONE   32 /* my_lock may have to do a seek */
#define	MY_DONT_WAIT   64 /* my_lock() don't wait if can't lock */
#define	MY_ZEROFILL   32 /* my_malloc(), fill array with zero */
#define	MY_ALLOW_ZERO_PTR   64 /* my_realloc() ; zero ptr -> malloc */
#define	MY_FREE_ON_ERROR   128 /* my_realloc() ; Free old ptr on error */
#define	MY_HOLD_ON_ERROR   256 /* my_realloc() ; Return old ptr on error */
#define	MY_DONT_OVERWRITE_FILE   1024 /* my_copy: Don't overwrite file */
#define	MY_SYNC   4096 /* my_copy(): sync dst file */
#define	MYF_RW   MYF(MY_WME + MY_NABP) /* For my_read & my_write */
#define	MY_CHECK_ERROR   1 /* Params to my_end; Check open-close */
#define	MY_GIVE_INFO   2 /* Give time info about process*/
#define	MY_DONT_FREE_DBUG   4 /* Do not call DBUG_END() in my_end() */
#define	ME_BELL   4 /* DEPRECATED: Ring bell then printing message */
#define	ME_ERRORLOG   64 /* Write the error message to error log */
#define	ME_FATALERROR   1024 /* Fatal statement error */
#define	MY_REPLACE_DIR   1 /* replace dir in name with 'dir' */
#define	MY_REPLACE_EXT   2 /* replace extension with 'ext' */
#define	MY_UNPACK_FILENAME   4 /* Unpack name (~ -> home) */
#define	MY_RESOLVE_SYMLINKS   16 /* Resolve all symbolic links */
#define	MY_RETURN_REAL_PATH   32 /* return full path for file */
#define	MY_SAFE_PATH   64 /* Return NULL if too long path */
#define	MY_RELATIVE_PATH   128 /* name is relative to 'dir' */
#define	MY_APPEND_EXT   256 /* add 'ext' as additional extension*/
#define	MY_SEEK_SET   0
#define	MY_SEEK_CUR   1
#define	MY_SEEK_END   2
#define	MY_WAIT_FOR_USER_TO_FIX_PANIC   60 /* in seconds */
#define	MY_WAIT_GIVE_USER_A_MESSAGE   10 /* Every 10 times of prev */
#define	MIN_COMPRESS_LENGTH   50 /* Don't compress small bl. */
#define	DFLT_INIT_HITS   3
#define	MY_ERRNO_EDOM   33
#define	MY_ERRNO_ERANGE   34
#define	my_safe_alloca(size, max_alloca_sz)
#define	my_safe_afree(ptr, size, max_alloca_sz)    if (size > max_alloca_sz) my_free(ptr)
#define	DEBUG_SYNC_C(_sync_point_name_)
#define	DEBUG_SYNC_C_IF_THD(thd, _sync_point_name_)
#define	my_alloca(SZ)   alloca((size_t)(SZ))
#define	MY_ALL_CHARSETS_SIZE   2048
#define	MALLOC_OVERHEAD   8
#define	RECORD_CACHE_SIZE   (uint)(64 * 1024 - MALLOC_OVERHEAD)
#define	MAX_SYSLOG_MESSAGE_SIZE   1024
#define	my_access   access
#define	is_filename_allowed(name, length, allow_cwd)   (true)
#define	my_delete_allow_opened(fname, flags)   my_delete((fname), (flags))
#define	base_name(A)   (A + dirname_length(A))
#define	flush_io_cache(info)   my_b_flush_io_cache((info), 1)
#define	dynamic_element(array, array_index, type)    ((type)((array)->buffer) + (array_index))
#define	alloc_root_inited(A)   ((A)->inited())
#define	MAP_NOSYNC   0
#define	MAP_NORESERVE   0
#define	my_mmap(a, b, c, d, e, f)   mmap64(a, b, c, d, e, f)
#define	my_munmap(a, b)   munmap((a), (b))

Typedefs
using	ErrorHandlerFunctionPointer = void(*)(uint, const char *, myf)
typedef int(*	IO_CACHE_CALLBACK) (IO_CACHE *)
typedef int(*	qsort2_cmp) (const void *, const void *, const void *)
typedef void(*	my_error_reporter) (enum loglevel level, uint ecode,...)
typedef void(*	my_error_vreporter) (enum loglevel level, uint ecode, va_list)

Enumerations
enum	cache_type {   TYPE_NOT_SET = 0 , READ_CACHE , WRITE_CACHE , SEQ_READ_APPEND ,   READ_FIFO , READ_NET , WRITE_NET }
enum	flush_type { FLUSH_KEEP , FLUSH_RELEASE , FLUSH_IGNORE_CHANGED , FLUSH_FORCE_WRITE }
enum	my_syslog_options { MY_SYSLOG_PIDS = 1 }
enum	UnlinkOrKeepFile { UNLINK_FILE , KEEP_FILE }

Functions
void *	my_multi_malloc (PSI_memory_key key, myf flags,...)
uint	my_get_large_page_size (void)
void	my_b_clear (IO_CACHE *info)
bool	my_b_inited (const IO_CACHE *info)
int	my_b_read (IO_CACHE *info, uchar *buffer, size_t count)
int	my_b_write (IO_CACHE *info, const uchar *buffer, size_t count)
int	_my_b_get (IO_CACHE *info)
int	my_b_get (IO_CACHE *info)
my_off_t	my_b_tell (const IO_CACHE *info)
uchar *	my_b_get_buffer_start (const IO_CACHE *info)
size_t	my_b_get_bytes_in_buffer (const IO_CACHE *info)
my_off_t	my_b_get_pos_in_file (const IO_CACHE *info)
int	my_b_copy_to_file (IO_CACHE *cache, FILE *file)
size_t	my_b_bytes_in_cache (const IO_CACHE *info)
int	my_copy (const char *from, const char *to, myf MyFlags)
int	my_delete (const char *name, myf MyFlags)
int	my_getwd (char *buf, size_t size, myf MyFlags)
int	my_setwd (const char *dir, myf MyFlags)
void *	my_once_alloc (size_t Size, myf MyFlags)
void	my_once_free (void)
char *	my_once_strdup (const char *src, myf myflags)
void *	my_once_memdup (const void *src, size_t len, myf myflags)
File	my_open (const char *filename, int Flags, myf MyFlags)
	Open a file. More...
File	my_create (const char *FileName, int CreateFlags, int AccessFlags, myf MyFlags)
	Create a new file. More...
int	my_close (File fd, myf MyFlags)
	Close a file. More...
int	my_mkdir (const char *dir, int Flags, myf MyFlags)
int	my_readlink (char *to, const char *filename, myf MyFlags)
int	my_is_symlink (const char *filename, ST_FILE_ID *file_id)
int	my_realpath (char *to, const char *filename, myf MyFlags)
int	my_is_same_file (File file, const ST_FILE_ID *file_id)
	Return non-zero if the file descriptor and a previously lstat-ed file identified by file_id point to the same file. More...
File	my_create_with_symlink (const char *linkname, const char *filename, int createflags, int access_flags, myf MyFlags)
int	my_delete_with_symlink (const char *name, myf MyFlags)
int	my_rename_with_symlink (const char *from, const char *to, myf MyFlags)
int	my_symlink (const char *content, const char *linkname, myf MyFlags)
size_t	my_read (File Filedes, uchar *Buffer, size_t Count, myf MyFlags)
	Read a chunk of bytes from a file with retry's if needed If flag MY_FULL_IO is set then keep reading until EOF is found. More...
size_t	my_pread (File Filedes, uchar *Buffer, size_t Count, my_off_t offset, myf MyFlags)
	Read a chunk of bytes from a file from a given position. More...
int	my_rename (const char *from, const char *to, myf MyFlags)
my_off_t	my_seek (File fd, my_off_t pos, int whence, myf MyFlags)
	Seek to a position in a file. More...
my_off_t	my_tell (File fd, myf MyFlags)
size_t	my_write (File Filedes, const uchar *Buffer, size_t Count, myf MyFlags)
	Write a chunk of bytes to a file. More...
size_t	my_pwrite (File Filedes, const uchar *Buffer, size_t Count, my_off_t offset, myf MyFlags)
	Write a chunk of bytes to a file at a given position. More...
size_t	my_fread (FILE *stream, uchar *Buffer, size_t Count, myf MyFlags)
	Read a chunk of bytes from a FILE stream. More...
size_t	my_fwrite (FILE *stream, const uchar *Buffer, size_t Count, myf MyFlags)
	Write a chunk of bytes to a FILE stream. More...
my_off_t	my_fseek (FILE *stream, my_off_t pos, int whence)
	Seek to position in FILE stream. More...
my_off_t	my_ftell (FILE *stream)
	Portable ftell() wrapper. More...
int	my_openlog (const char *eventSourceName, int option, int facility)
	Opens/Registers a new handle for system logging. More...
int	my_closelog ()
	Closes/de-registers the system logging handle. More...
int	my_syslog (const CHARSET_INFO *cs, enum loglevel level, const char *msg)
	Sends message to the system logger. More...
int	check_if_legal_filename (const char *path)
int	check_if_legal_tablename (const char *path)
const char *	get_global_errmsg (int nr)
void	wait_for_free_space (const char *filename, int errors)
FILE *	my_fopen (const char *filename, int Flags, myf MyFlags)
	Open a file as stream. More...
FILE *	my_fdopen (File fd, const char *filename, int Flags, myf MyFlags)
	Make a stream out of a file handle. More...
FILE *	my_freopen (const char *filename, const char *mode, FILE *stream)
	Change the file associated with a file stream. More...
int	my_fclose (FILE *stream, myf MyFlags)
	Close a stream. More...
File	my_fileno (FILE *stream)
	Portable fileno() wrapper. More...
int	my_chsize (File fd, my_off_t newlength, int filler, myf MyFlags)
	Change size of file. More...
int	my_fallocator (File fd, my_off_t newlength, int filler, myf MyFlags)
	Change size of the specified file. More...
void	thr_set_sync_wait_callback (void(*before_sync)(void), void(*after_sync)(void))
int	my_sync (File fd, myf my_flags)
char *	my_strerror (char *buf, size_t len, int errnum)
	Get a string describing a system or handler error. More...
const char *	my_get_err_msg (int nr)
	Get an error format string from one of the my_error_register()ed sets. More...
void	my_error (int nr, myf MyFlags,...)
	Fill in and print a previously registered error message. More...
void	my_printf_error (uint my_err, const char *format, myf MyFlags,...)
	Print an error message. More...
void	my_printv_error (uint error, const char *format, myf MyFlags, va_list ap)
	Print an error message. More...
int	my_error_register (const char *(*get_errmsg)(int), int first, int last)
	Register error messages for use with my_error(). More...
bool	my_error_unregister (int first, int last)
	Unregister formerly registered error messages. More...
void	my_message (uint my_err, const char *str, myf MyFlags)
	Print an error message. More...
void	my_message_stderr (uint my_err, const char *str, myf MyFlags)
	Print an error message on stderr. More...
void	my_message_local_stderr (enum loglevel, uint ecode, va_list args)
	Issue a message locally (i.e. More...
void	my_message_local (enum loglevel ll, uint ecode,...)
	Issue a message locally (i.e. More...
template<class... Ts>
void	MyOsError (int errno_val, Ts... ppck)
	Convenience wrapper for OS error messages which report errno/my_errno with d followed by strerror as s, as the last conversions in the error message. More...
bool	my_init (void)
	Initialize my_sys functions, resources and variables. More...
void	my_end (int infoflag)
const char *	my_filename (File fd)
	Get filename of file. More...
MY_MODE	get_file_perm (ulong perm_flags)
bool	my_chmod (const char *filename, ulong perm_flags, myf my_flags)
bool	init_tmpdir (MY_TMPDIR *tmpdir, const char *pathlist)
char *	my_tmpdir (MY_TMPDIR *tmpdir)
void	free_tmpdir (MY_TMPDIR *tmpdir)
size_t	dirname_part (char *to, const char *name, size_t *to_res_length)
	Gives directory part of filename. More...
size_t	dirname_length (const char *name)
	Get the string length of the directory part of name, including the last FN_LIBCHAR. More...
int	test_if_hard_path (const char *dir_name)
bool	has_path (const char *name)
char *	convert_dirname (char *to, const char *from, const char *from_end)
	Convert directory name to use under this system. More...
void	to_unix_path (char *name)
	Convert filename to unix style filename. More...
char *	fn_ext (char *name)
const char *	fn_ext (const char *name)
char *	fn_same (char *toname, const char *name, int flag)
char *	fn_format (char *to, const char *name, const char *dir, const char *form, uint flag)
	Formats a filename with possible replace of directory of extension Function can handle the case where 'to' == 'name' For a description of the flag values, consult my_sys.h The arguments should be in unix format. More...
size_t	strlength (const char *str)
	Calculate the length of str not including any trailing ' '-bytes. More...
size_t	normalize_dirname (char *to, const char *from)
	Convert a directory name to a format which can be compared as strings. More...
size_t	unpack_dirname (char *to, const char *from)
	Fixes a directory name so that can be used by open(). More...
size_t	cleanup_dirname (char *to, const char *from)
	Remove unwanted chars from dirname. More...
size_t	system_filename (char *to, const char *from)
	Convert filename (unix standard) to system standard Used before system command's like open(), create() More...
size_t	unpack_filename (char *to, const char *from)
	Fix filename so it can be used by open, create. More...
char *	intern_filename (char *to, const char *from)
	Fix a filename to intern (UNIX format). More...
char *	my_path (char *to, const char *progname, const char *own_pathname_part)
char *	my_load_path (char *to, const char *path, const char *own_path_prefix)
	Returns full load-path for a file. More...
bool	array_append_string_unique (const char *str, const char **array, size_t size)
	Append str to array, or move to the end if it already exists. More...
void	my_store_ptr (uchar *buff, size_t pack_length, my_off_t pos)
my_off_t	my_get_ptr (uchar *ptr, size_t pack_length)
int	init_io_cache_ext (IO_CACHE *info, File file, size_t cachesize, enum cache_type type, my_off_t seek_offset, bool use_async_io, myf cache_myflags, PSI_file_key file_key)
int	init_io_cache (IO_CACHE *info, File file, size_t cachesize, enum cache_type type, my_off_t seek_offset, bool use_async_io, myf cache_myflags)
bool	reinit_io_cache (IO_CACHE *info, enum cache_type type, my_off_t seek_offset, bool use_async_io, bool clear_cache)
void	setup_io_cache (IO_CACHE *info)
int	_my_b_read (IO_CACHE *info, uchar *Buffer, size_t Count)
int	_my_b_read_r (IO_CACHE *info, uchar *Buffer, size_t Count)
void	init_io_cache_share (IO_CACHE *read_cache, IO_CACHE_SHARE *cshare, IO_CACHE *write_cache, uint num_threads)
void	remove_io_thread (IO_CACHE *info)
int	_my_b_seq_read (IO_CACHE *info, uchar *Buffer, size_t Count)
int	_my_b_net_read (IO_CACHE *info, uchar *Buffer, size_t Count)
	Read buffered from the net. More...
int	_my_b_write (IO_CACHE *info, const uchar *Buffer, size_t Count)
int	my_b_append (IO_CACHE *info, const uchar *Buffer, size_t Count)
int	my_b_safe_write (IO_CACHE *info, const uchar *Buffer, size_t Count)
int	my_block_write (IO_CACHE *info, const uchar *Buffer, size_t Count, my_off_t pos)
int	my_b_flush_io_cache (IO_CACHE *info, int need_append_buffer_lock)
int	end_io_cache (IO_CACHE *info)
size_t	my_b_fill (IO_CACHE *info)
void	my_b_seek (IO_CACHE *info, my_off_t pos)
size_t	my_b_gets (IO_CACHE *info, char *to, size_t max_length)
my_off_t	my_b_filelength (IO_CACHE *info)
size_t	my_b_printf (IO_CACHE *info, const char *fmt,...)
	Simple printf version. More...
size_t	my_b_vprintf (IO_CACHE *info, const char *fmt, va_list ap)
	Implementation of my_b_printf. More...
bool	open_cached_file (IO_CACHE *cache, const char *dir, const char *prefix, size_t cache_size, myf cache_myflags)
bool	real_open_cached_file (IO_CACHE *cache)
void	close_cached_file (IO_CACHE *cache)
File	create_temp_file (char *to, const char *dir, const char *pfx, int mode, UnlinkOrKeepFile unlink_or_keep, myf MyFlags)
bool	my_init_dynamic_array (DYNAMIC_ARRAY *array, PSI_memory_key key, uint element_size, void *init_buffer, uint init_alloc, uint alloc_increment)
bool	insert_dynamic (DYNAMIC_ARRAY *array, const void *element)
void *	alloc_dynamic (DYNAMIC_ARRAY *array)
void	delete_dynamic (DYNAMIC_ARRAY *array)
bool	init_dynamic_string (DYNAMIC_STRING *str, const char *init_str, size_t init_alloc)
bool	dynstr_append (DYNAMIC_STRING *str, const char *append)
bool	dynstr_append_mem (DYNAMIC_STRING *str, const char *append, size_t length)
bool	dynstr_append_os_quoted (DYNAMIC_STRING *str, const char *append,...)
bool	dynstr_append_quoted (DYNAMIC_STRING *str, const char *quote_str, const uint quote_len, const char *append,...)
bool	dynstr_set (DYNAMIC_STRING *str, const char *init_str)
bool	dynstr_realloc (DYNAMIC_STRING *str, size_t additional_size)
bool	dynstr_trunc (DYNAMIC_STRING *str, size_t n)
void	dynstr_free (DYNAMIC_STRING *str)
void *	multi_alloc_root (MEM_ROOT *mem_root,...)
char *	strdup_root (MEM_ROOT *root, const char *str)
char *	safe_strdup_root (MEM_ROOT *root, const char *str)
char *	strmake_root (MEM_ROOT *root, const char *str, size_t len)
void *	memdup_root (MEM_ROOT *root, const void *str, size_t len)
bool	my_compress (mysql_compress_context *, uchar *, size_t *, size_t *)
	This replaces the packet with a compressed packet. More...
bool	my_uncompress (mysql_compress_context *, uchar *, size_t, size_t *)
	Uncompress packet. More...
uchar *	my_compress_alloc (mysql_compress_context *comp_ctx, const uchar *packet, size_t *len, size_t *complen)
uint	my_set_max_open_files (uint files)
	Sets the OS limit on the number of open files (if supported). More...
bool	my_gethwaddr (uchar *to)
static int	my_getpagesize ()
int	my_msync (int, void *, size_t, int)
uint	get_charset_number (const char *cs_name, uint cs_flags)
uint	get_collation_number (const char *name)
const char *	get_collation_name (uint charset_number)
CHARSET_INFO *	get_charset (uint cs_number, myf flags)
CHARSET_INFO *	get_charset_by_name (const char *cs_name, myf flags)
CHARSET_INFO *	my_collation_get_by_name (const char *collation_name, myf flags, MY_CHARSET_ERRMSG *)
	Find collation by name: extended version of get_charset_by_name() to return error messages to the caller. More...
CHARSET_INFO *	get_charset_by_csname (const char *cs_name, uint cs_flags, myf my_flags)
CHARSET_INFO *	my_charset_get_by_name (const char *name, uint cs_flags, myf my_flags, MY_CHARSET_ERRMSG *)
	Find character set by name: extended version of get_charset_by_csname() to return error messages to the caller. More...
bool	resolve_charset (const char *cs_name, const CHARSET_INFO *default_cs, const CHARSET_INFO **cs)
	Resolve character set by the character set name (utf8, latin1, ...). More...
bool	resolve_collation (const char *cl_name, const CHARSET_INFO *default_cl, const CHARSET_INFO **cl)
	Resolve collation by the collation name (utf8_general_ci, ...). More...
char *	get_charsets_dir (char *buf)
size_t	escape_string_for_mysql (const CHARSET_INFO *charset_info, char *to, size_t to_length, const char *from, size_t length)
void	charset_uninit ()
size_t	escape_quotes_for_mysql (CHARSET_INFO *charset_info, char *to, size_t to_length, const char *from, size_t length, char quote)
void	my_init_mysys_psi_keys (void)
void	set_psi_cond_service (void *psi)
void	set_psi_data_lock_service (void *psi)
void	set_psi_error_service (void *psi)
void	set_psi_file_service (void *psi)
void	set_psi_idle_service (void *psi)
void	set_psi_mdl_service (void *psi)
void	set_psi_memory_service (void *psi)
void	set_psi_metric_service (void *psi)
void	set_psi_mutex_service (void *psi)
void	set_psi_rwlock_service (void *psi)
void	set_psi_socket_service (void *psi)
void	set_psi_stage_service (void *psi)
void	set_psi_statement_service (void *psi)
void	set_psi_system_service (void *psi)
void	set_psi_table_service (void *psi)
void	set_psi_thread_service (void *psi)
void	set_psi_transaction_service (void *psi)
void	set_psi_tls_channel_service (void *psi)
unsigned long long	my_physical_memory ()

Variables
PSI_memory_key	key_memory_max_alloca
char *	home_dir
const char *	my_progname
std::atomic< ErrorHandlerFunctionPointer >	error_handler_hook
void(*	local_message_hook )(enum loglevel ll, uint ecode, va_list args)
MYSQL_PLUGIN_IMPORT ulong	my_thread_stack_size
void(*	enter_cond_hook )(void *opaque_thd, mysql_cond_t *cond, mysql_mutex_t *mutex, const PSI_stage_info *stage, PSI_stage_info *old_stage, const char *src_function, const char *src_file, int src_line)
void(*	exit_cond_hook )(void *opaque_thd, const PSI_stage_info *stage, const char *src_function, const char *src_file, int src_line)
void(*	enter_stage_hook )(void *opaque_thd, const PSI_stage_info *new_stage, PSI_stage_info *old_stage, const char *src_function, const char *src_file, int src_line)
void(*	set_waiting_for_disk_space_hook )(void *opaque_thd, bool waiting)
int(*	is_killed_hook )(const void *opaque_thd)
MYSQL_PLUGIN_IMPORT CHARSET_INFO *	default_charset_info
MYSQL_PLUGIN_IMPORT const CHARSET_INFO *	all_charsets [MY_ALL_CHARSETS_SIZE]
ulong	my_tmp_file_created
ulong	my_file_opened
ulong	my_stream_opened
ulong	my_file_total_opened
bool	my_init_done
MYSQL_PLUGIN_IMPORT int	my_umask
int	my_umask_dir
ulong	my_default_record_cache_size
bool	my_disable_locking
bool	my_enable_symlinks
const char *	charsets_dir
my_error_vreporter	my_charset_error_reporter
PSI_file_key	key_file_io_cache
constexpr int	my_b_EOF = INT_MIN
MYSQL_PLUGIN_IMPORT PSI_cond_bootstrap *	psi_cond_hook
MYSQL_PLUGIN_IMPORT PSI_data_lock_bootstrap *	psi_data_lock_hook
MYSQL_PLUGIN_IMPORT PSI_error_bootstrap *	psi_error_hook
MYSQL_PLUGIN_IMPORT PSI_file_bootstrap *	psi_file_hook
MYSQL_PLUGIN_IMPORT PSI_idle_bootstrap *	psi_idle_hook
MYSQL_PLUGIN_IMPORT PSI_mdl_bootstrap *	psi_mdl_hook
MYSQL_PLUGIN_IMPORT PSI_memory_bootstrap *	psi_memory_hook
MYSQL_PLUGIN_IMPORT PSI_mutex_bootstrap *	psi_mutex_hook
MYSQL_PLUGIN_IMPORT PSI_metric_bootstrap *	psi_metric_hook
MYSQL_PLUGIN_IMPORT PSI_rwlock_bootstrap *	psi_rwlock_hook
MYSQL_PLUGIN_IMPORT PSI_socket_bootstrap *	psi_socket_hook
MYSQL_PLUGIN_IMPORT PSI_stage_bootstrap *	psi_stage_hook
MYSQL_PLUGIN_IMPORT PSI_statement_bootstrap *	psi_statement_hook
MYSQL_PLUGIN_IMPORT PSI_system_bootstrap *	psi_system_hook
MYSQL_PLUGIN_IMPORT PSI_table_bootstrap *	psi_table_hook
MYSQL_PLUGIN_IMPORT PSI_thread_bootstrap *	psi_thread_hook
MYSQL_PLUGIN_IMPORT PSI_transaction_bootstrap *	psi_transaction_hook
MYSQL_PLUGIN_IMPORT PSI_tls_channel_bootstrap *	psi_tls_channel_hook

Detailed Description

Macro Definition Documentation

alloc_root_inited

#define alloc_root_inited

(

A

)

((A)->inited())

base_name

#define base_name

(

A

)

(A + dirname_length(A))

DEBUG_SYNC_C

#define DEBUG_SYNC_C

(

_sync_point_name_

)

DEBUG_SYNC_C_IF_THD

#define DEBUG_SYNC_C_IF_THD	(		thd,
			_sync_point_name_
	)

DFLT_INIT_HITS

#define DFLT_INIT_HITS   3

dynamic_element

#define dynamic_element	(		array,
			array_index,
			type
	)		((type)((array)->buffer) + (array_index))

flush_io_cache

#define flush_io_cache

(

info

)

my_b_flush_io_cache((info), 1)

is_filename_allowed

#define is_filename_allowed	(		name,
			length,
			allow_cwd
	)		(true)

MALLOC_OVERHEAD

#define MALLOC_OVERHEAD   8

MAP_NORESERVE

#define MAP_NORESERVE   0

MAP_NOSYNC

#define MAP_NOSYNC   0

MAX_SYSLOG_MESSAGE_SIZE

#define MAX_SYSLOG_MESSAGE_SIZE   1024

ME_BELL

#define ME_BELL   4 /* DEPRECATED: Ring bell then printing message */

ME_ERRORLOG

#define ME_ERRORLOG   64 /* Write the error message to error log */

ME_FATALERROR

#define ME_FATALERROR   1024 /* Fatal statement error */

MIN_COMPRESS_LENGTH

#define MIN_COMPRESS_LENGTH   50 /* Don't compress small bl. */

my_access

#define my_access   access

MY_ALL_CHARSETS_SIZE

#define MY_ALL_CHARSETS_SIZE   2048

my_alloca

#define my_alloca

(

SZ

)

alloca((size_t)(SZ))

MY_ALLOW_ZERO_PTR

#define MY_ALLOW_ZERO_PTR   64 /* my_realloc() ; zero ptr -> malloc */

MY_APPEND_EXT

#define MY_APPEND_EXT   256 /* add 'ext' as additional extension*/

MY_CHECK_ERROR

#define MY_CHECK_ERROR   1 /* Params to my_end; Check open-close */

MY_COPYTIME

#define MY_COPYTIME   64 /* my_redel() copies time */

my_delete_allow_opened

#define my_delete_allow_opened	(		fname,
			flags
	)		my_delete((fname), (flags))

MY_DELETE_OLD

#define MY_DELETE_OLD   256 /* my_create_with_symlink() */

MY_DONT_CHECK_FILESIZE

#define MY_DONT_CHECK_FILESIZE   128 /* Option to init_io_cache() */

MY_DONT_FREE_DBUG

#define MY_DONT_FREE_DBUG   4 /* Do not call DBUG_END() in my_end() */

MY_DONT_OVERWRITE_FILE

#define MY_DONT_OVERWRITE_FILE   1024 /* my_copy: Don't overwrite file */

MY_DONT_WAIT

#define MY_DONT_WAIT   64 /* my_lock() don't wait if can't lock */

MY_ERRNO_EDOM

#define MY_ERRNO_EDOM   33

MY_ERRNO_ERANGE

#define MY_ERRNO_ERANGE   34

MY_FAE

#define MY_FAE   8 /* Fatal if any error */

MY_FILE_ERROR

#define MY_FILE_ERROR   ((size_t)-1)

MY_FNABP

#define MY_FNABP   2 /* Fatal if not all bytes read/written */

MY_FREE_ON_ERROR

#define MY_FREE_ON_ERROR   128 /* my_realloc() ; Free old ptr on error */

MY_FULL_IO

#define MY_FULL_IO   512 /* For my_read - loop intil I/O is complete */

MY_GIVE_INFO

#define MY_GIVE_INFO   2 /* Give time info about process*/

MY_HOLD_ON_ERROR

#define MY_HOLD_ON_ERROR   256 /* my_realloc() ; Return old ptr on error */

MY_HOLD_ORIGINAL_MODES

#define MY_HOLD_ORIGINAL_MODES   128 /* my_copy() holds to file modes */

MY_IGNORE_BADFD

#define MY_IGNORE_BADFD   32 /* my_sync: ignore 'bad descriptor' errors */

MY_INIT

#define MY_INIT

(

name

)

Value:

  {                     \
    my_progname = name; \
    my_init();          \
  }

MY_LINK_WARNING

#define MY_LINK_WARNING   32 /* my_redel() gives warning if links */

my_mmap

#define my_mmap	(		a,
			b,
			c,
			d,
			e,
			f
	)		mmap64(a, b, c, d, e, f)

my_munmap

#define my_munmap	(		a,
			b
	)		munmap((a), (b))

MY_NABP

#define MY_NABP   4 /* Error if not all bytes read/written */

MY_RELATIVE_PATH

#define MY_RELATIVE_PATH   128 /* name is relative to 'dir' */

MY_REPLACE_DIR

#define MY_REPLACE_DIR   1 /* replace dir in name with 'dir' */

MY_REPLACE_EXT

#define MY_REPLACE_EXT   2 /* replace extension with 'ext' */

MY_REPORT_WAITING_IF_FULL

#define MY_REPORT_WAITING_IF_FULL   64 /* my_write: set status as waiting */

MY_RESOLVE_LINK

#define MY_RESOLVE_LINK   128 /* my_realpath(); Only resolve links */

MY_RESOLVE_SYMLINKS

#define MY_RESOLVE_SYMLINKS   16 /* Resolve all symbolic links */

MY_RETURN_REAL_PATH

#define MY_RETURN_REAL_PATH   32 /* return full path for file */

my_safe_afree

#define my_safe_afree	(		ptr,
			size,
			max_alloca_sz
	)		if (size > max_alloca_sz) my_free(ptr)

my_safe_alloca

#define my_safe_alloca	(		size,
			max_alloca_sz
	)

Value:

  ((size <= max_alloca_sz) ? my_alloca(size) \
                           : my_malloc(key_memory_max_alloca, size, MYF(0)))

MY_SAFE_PATH

#define MY_SAFE_PATH   64 /* Return NULL if too long path */

MY_SEEK_CUR

#define MY_SEEK_CUR   1

MY_SEEK_END

#define MY_SEEK_END   2

MY_SEEK_NOT_DONE

#define MY_SEEK_NOT_DONE   32 /* my_lock may have to do a seek */

MY_SEEK_SET

#define MY_SEEK_SET   0

MY_SYNC

#define MY_SYNC   4096 /* my_copy(): sync dst file */

MY_UNPACK_FILENAME

#define MY_UNPACK_FILENAME   4 /* Unpack name (~ -> home) */

MY_WAIT_FOR_USER_TO_FIX_PANIC

#define MY_WAIT_FOR_USER_TO_FIX_PANIC   60 /* in seconds */

MY_WAIT_GIVE_USER_A_MESSAGE

#define MY_WAIT_GIVE_USER_A_MESSAGE   10 /* Every 10 times of prev */

MY_WAIT_IF_FULL

#define MY_WAIT_IF_FULL   32 /* Wait and try again if disk full error */

MY_WME

#define MY_WME   16 /* Write message on error */

MY_ZEROFILL

#define MY_ZEROFILL   32 /* my_malloc(), fill array with zero */

MYF_RW

#define MYF_RW   MYF(MY_WME + MY_NABP) /* For my_read & my_write */

MYSYS_ERRMSG_SIZE

#define MYSYS_ERRMSG_SIZE   (512)

Max length of an error message generated by mysys utilities.

Some mysys functions produce error messages. These mostly go to stderr. This constant defines the size of the buffer used to format the message. It should be kept in sync with MYSQL_ERRMSG_SIZE, since sometimes mysys errors are stored in the server diagnostics area, and we would like to avoid unexpected truncation.

MYSYS_STRERROR_SIZE

#define MYSYS_STRERROR_SIZE   (128)

RECORD_CACHE_SIZE

#define RECORD_CACHE_SIZE   (uint)(64 * 1024 - MALLOC_OVERHEAD)

Typedef Documentation

ErrorHandlerFunctionPointer

using ErrorHandlerFunctionPointer = void (*)(uint, const char *, myf)

IO_CACHE_CALLBACK

typedef int(* IO_CACHE_CALLBACK) (IO_CACHE *)

my_error_reporter

typedef void(* my_error_reporter) (enum loglevel level, uint ecode,...)

my_error_vreporter

typedef void(* my_error_vreporter) (enum loglevel level, uint ecode, va_list)

qsort2_cmp

typedef int(* qsort2_cmp) (const void *, const void *, const void *)

Enumeration Type Documentation

cache_type

enum cache_type

Enumerator
TYPE_NOT_SET
READ_CACHE
WRITE_CACHE
SEQ_READ_APPEND
READ_FIFO
READ_NET
WRITE_NET

flush_type

enum flush_type

Enumerator
FLUSH_KEEP
FLUSH_RELEASE
FLUSH_IGNORE_CHANGED
FLUSH_FORCE_WRITE

my_syslog_options

enum my_syslog_options

Enumerator
MY_SYSLOG_PIDS

UnlinkOrKeepFile

enum UnlinkOrKeepFile

Enumerator
UNLINK_FILE
KEEP_FILE

Function Documentation

_my_b_get()

int _my_b_get

(

IO_CACHE *

info

)

_my_b_net_read()

int _my_b_net_read	(	IO_CACHE *	info,
		uchar *	Buffer,
		size_t	Count
	)

Read buffered from the net.

Return values

1	if can't read requested characters
0	if record read

_my_b_read()

int _my_b_read	(	IO_CACHE *	info,
		uchar *	Buffer,
		size_t	Count
	)

_my_b_read_r()

int _my_b_read_r	(	IO_CACHE *	info,
		uchar *	Buffer,
		size_t	Count
	)

_my_b_seq_read()

int _my_b_seq_read	(	IO_CACHE *	info,
		uchar *	Buffer,
		size_t	Count
	)

_my_b_write()

int _my_b_write	(	IO_CACHE *	info,
		const uchar *	Buffer,
		size_t	Count
	)

alloc_dynamic()

void * alloc_dynamic

(

DYNAMIC_ARRAY *

array

)

array_append_string_unique()

bool array_append_string_unique	(	const char *	str,
		const char **	array,
		size_t	size
	)

Append str to array, or move to the end if it already exists.

Parameters

str	String to be appended
array	The array, terminated by a NULL element, all unused elements pre-initialized to NULL
size	Size of the array; array must be terminated by a NULL pointer, so can hold size - 1 elements

Return values

false	Success
true	Failure, array is full

charset_uninit()

void charset_uninit

(

)

check_if_legal_filename()

int check_if_legal_filename

(

const char *

path

)

check_if_legal_tablename()

int check_if_legal_tablename

(

const char *

path

)

cleanup_dirname()

size_t cleanup_dirname	(	char *	to,
		const char *	from
	)

Remove unwanted chars from dirname.

Pre-condition: At least FN_REFLEN bytes can be stored in buffer pointed to by 'to'. 'from' is a '\0'-terminated byte buffer.

Post-condition: At most FN_REFLEN bytes will have been written to 'to'. If the combined length of 'from' and any expanded elements exceeds FN_REFLEN-1, the result is truncated and likely not what the caller expects.

IMPLEMENTATION: "/../" removes prev dir "/~/" removes all before ~ " is same as "/", except on Win32 at start of a file "/./" is removed Unpacks home_dir if "~/.." used Unpacks current dir if if "./.." used

Parameters

to	Store result here
from	Dirname to fix. May be same as to

Returns

length of new name

close_cached_file()

void close_cached_file

(

IO_CACHE *

cache

)

convert_dirname()

char * convert_dirname	(	char *	to,
		const char *	from,
		const char *	from_end
	)

Convert directory name to use under this system.

Pre-condition: At least FN_REFLEN bytes can be stored in buffer pointed to by 'to'. 'from' is a '\0'-terminated byte buffer.

Post-condition: At most FN_REFLEN bytes will have been written to 'to'. If the combined length of 'from' and any expanded elements exceeds FN_REFLEN-1, the result is truncated and likely not what the caller expects.

IMPLEMENTATION: If Windows converts '/' to '\' Adds a FN_LIBCHAR to end if the result string if there isn't one and the last isn't dev_char. Copies data from 'from' until ASCII(0) for until from == from_end If you want to use the whole 'from' string, just send nullptr as the last argument.

If the result string is larger than FN_REFLEN -1, then it's cut.

Parameters

to	destination buffer. Store result here. Must be at least of size min(FN_REFLEN, strlen(from) + 1) to make room for adding FN_LIBCHAR at the end.
from	Original filename. May be == to
from_end	Pointer at end of filename (normally end \0)

Returns

Returns pointer to end \0 in to

create_temp_file()

File create_temp_file	(	char *	to,
		const char *	dir,
		const char *	pfx,
		int	mode,
		UnlinkOrKeepFile	unlink_or_keep,
		myf	MyFlags
	)

delete_dynamic()

void delete_dynamic

(

DYNAMIC_ARRAY *

array

)

dirname_length()

size_t dirname_length

(

const char *

name

)

Get the string length of the directory part of name, including the last FN_LIBCHAR.

If name is not a path, return 0.

On Windows, we special-case Shift-JIS (or more specifically, Windows code-page 932).

Everything else (i.e. anything that's not CP932 and on Windows) is considered binary. Specifically, we assume that drive and directory separators are single-byte (and as defined by FN_LIBCHAR / FN_LIBCHAR2), and that the string is '\0' terminated. Therefore, latin-*, UTF-8, and other arguments that behave sufficiently like ASCII will work, whereas e.g. UTF-16 would break as the separators would have '\0' as part of the UTF-16 character. Fortunately, CP932 does not use '\0' as part of a multi-byte character.

Parameters

name	path to calculate directory length for.

Returns

length of directory part (including the last separator), or 0

dirname_part()

size_t dirname_part	(	char *	to,
		const char *	name,
		size_t *	to_res_length
	)

Gives directory part of filename.

Directory ends with '/'.

Pre-condition: At least FN_REFLEN bytes can be stored in buffer pointed to by 'to'. 'from' is a '\0'-terminated byte buffer.

Post-condition: At most FN_REFLEN bytes will have been written to 'to'. If the combined length of 'from' and any expanded elements exceeds FN_REFLEN-1, the result is truncated and likely not what the caller expects. If the result is truncated, the return value will be larger than the length stored in 'to_length'.

Parameters

to	destination buffer.
name	path to get the directory part of.
to_res_length	store the the number of bytes written into 'to'.

Returns

Actual length of directory part in 'name' (the number of bytes which would have been written if 'to' had been large enough).

dynstr_append()

bool dynstr_append	(	DYNAMIC_STRING *	str,
		const char *	append
	)

dynstr_append_mem()

bool dynstr_append_mem	(	DYNAMIC_STRING *	str,
		const char *	append,
		size_t	length
	)

dynstr_append_os_quoted()

bool dynstr_append_os_quoted	(	DYNAMIC_STRING *	str,
		const char *	append,
			...
	)

dynstr_append_quoted()

bool dynstr_append_quoted	(	DYNAMIC_STRING *	str,
		const char *	quote_str,
		const uint	quote_len,
		const char *	append,
			...
	)

dynstr_free()

void dynstr_free

(

DYNAMIC_STRING *

str

)

dynstr_realloc()

bool dynstr_realloc	(	DYNAMIC_STRING *	str,
		size_t	additional_size
	)

dynstr_set()

bool dynstr_set	(	DYNAMIC_STRING *	str,
		const char *	init_str
	)

dynstr_trunc()

bool dynstr_trunc	(	DYNAMIC_STRING *	str,
		size_t	n
	)

end_io_cache()

int end_io_cache

(

IO_CACHE *

info

)

escape_quotes_for_mysql()

size_t escape_quotes_for_mysql	(	CHARSET_INFO *	charset_info,
		char *	to,
		size_t	to_length,
		const char *	from,
		size_t	length,
		char	quote
	)

escape_string_for_mysql()

size_t escape_string_for_mysql	(	const CHARSET_INFO *	charset_info,
		char *	to,
		size_t	to_length,
		const char *	from,
		size_t	length
	)

fn_ext() [1/2]

char * fn_ext

(

char *

name

)

fn_ext() [2/2]

const char * fn_ext

(

const char *

name

)

fn_format()

char * fn_format	(	char *	to,
		const char *	name,
		const char *	dir,
		const char *	extension,
		uint	flag
	)

Formats a filename with possible replace of directory of extension Function can handle the case where 'to' == 'name' For a description of the flag values, consult my_sys.h The arguments should be in unix format.

Pre-condition: At least FN_REFLEN bytes can be stored in buffer pointed to by 'to'. 'name', 'dir' and 'extension' are '\0'-terminated byte buffers (or nullptr where permitted).

Post-condition: At most FN_REFLEN bytes will have been written to 'to'. If the combined length of 'from' and any expanded elements exceeds FN_REFLEN-1, the result is truncated and likely not what the caller expects.

Parameters

to	destination buffer.
name	file name component.
dir	directory component.
extension	filename extension
flag	bitset of 'Bits in last argument of fn_format' from <my_sys.h> like MY_REPLACE_DIR

Returns

to (destination buffer), or nullptr if overflow and MY_SAFE_PATH is used.

fn_same()

char * fn_same	(	char *	toname,
		const char *	name,
		int	flag
	)

free_tmpdir()

void free_tmpdir

(

MY_TMPDIR *

tmpdir

)

get_charset()

CHARSET_INFO * get_charset	(	uint	cs_number,
		myf	flags
	)

get_charset_by_csname()

CHARSET_INFO * get_charset_by_csname	(	const char *	cs_name,
		uint	cs_flags,
		myf	my_flags
	)

get_charset_by_name()

CHARSET_INFO * get_charset_by_name	(	const char *	cs_name,
		myf	flags
	)

get_charset_number()

uint get_charset_number	(	const char *	cs_name,
		uint	cs_flags
	)

get_charsets_dir()

char * get_charsets_dir

(

char *

buf

)

get_collation_name()

const char * get_collation_name

(

uint

charset_number

)

get_collation_number()

uint get_collation_number

(

const char *

name

)

get_file_perm()

MY_MODE get_file_perm

(

ulong

perm_flags

)

get_global_errmsg()

const char * get_global_errmsg

(

int

nr

)

has_path()

bool has_path

(

const char *

name

)

init_dynamic_string()

bool init_dynamic_string	(	DYNAMIC_STRING *	str,
		const char *	init_str,
		size_t	init_alloc
	)

init_io_cache()

int init_io_cache	(	IO_CACHE *	info,
		File	file,
		size_t	cachesize,
		enum cache_type	type,
		my_off_t	seek_offset,
		bool	use_async_io,
		myf	cache_myflags
	)

init_io_cache_ext()

int init_io_cache_ext	(	IO_CACHE *	info,
		File	file,
		size_t	cachesize,
		enum cache_type	type,
		my_off_t	seek_offset,
		bool	use_async_io,
		myf	cache_myflags,
		PSI_file_key	file_key
	)

init_io_cache_share()

void init_io_cache_share	(	IO_CACHE *	read_cache,
		IO_CACHE_SHARE *	cshare,
		IO_CACHE *	write_cache,
		uint	num_threads
	)

init_tmpdir()

bool init_tmpdir	(	MY_TMPDIR *	tmpdir,
		const char *	pathlist
	)

insert_dynamic()

bool insert_dynamic	(	DYNAMIC_ARRAY *	array,
		const void *	element
	)

intern_filename()

char * intern_filename	(	char *	to,
		const char *	from
	)

Fix a filename to intern (UNIX format).

Pre-condition: At least FN_REFLEN bytes can be stored in buffer pointed to by 'to'. 'from' is a '\0'-terminated byte buffer.

Post-condition: At most FN_REFLEN bytes will have been written to 'to'. If the combined length of 'from' and any expanded elements exceeds FN_REFLEN-1, the result is truncated and likely not what the caller expects.

Parameters

to	destination buffer.
from	source string.

Returns

to (destination buffer).

memdup_root()

void * memdup_root	(	MEM_ROOT *	root,
		const void *	str,
		size_t	len
	)

multi_alloc_root()

void * multi_alloc_root	(	MEM_ROOT *	mem_root,
			...
	)

my_b_append()

int my_b_append	(	IO_CACHE *	info,
		const uchar *	Buffer,
		size_t	Count
	)

my_b_bytes_in_cache()

size_t my_b_bytes_in_cache ( const IO_CACHE *  info )

inline

my_b_clear()

void my_b_clear ( IO_CACHE *  info )

inline

my_b_copy_to_file()

int my_b_copy_to_file	(	IO_CACHE *	cache,
		FILE *	file
	)

my_b_filelength()

my_off_t my_b_filelength

(

IO_CACHE *

info

)

my_b_fill()

size_t my_b_fill

(

IO_CACHE *

info

)

my_b_flush_io_cache()

int my_b_flush_io_cache	(	IO_CACHE *	info,
		int	need_append_buffer_lock
	)

my_b_get()

int my_b_get ( IO_CACHE *  info )

inline

my_b_get_buffer_start()

uchar * my_b_get_buffer_start ( const IO_CACHE *  info )

inline

my_b_get_bytes_in_buffer()

size_t my_b_get_bytes_in_buffer ( const IO_CACHE *  info )

inline

my_b_get_pos_in_file()

my_off_t my_b_get_pos_in_file ( const IO_CACHE *  info )

inline

my_b_gets()

size_t my_b_gets	(	IO_CACHE *	info,
		char *	to,
		size_t	max_length
	)

my_b_inited()

bool my_b_inited ( const IO_CACHE *  info )

inline

my_b_printf()

size_t my_b_printf	(	IO_CACHE *	info,
		const char *	fmt,
			...
	)

Simple printf version.

Used for logging in MySQL. Supports 'c', 's', 'b', 'd', 'u', 'ld', 'lu' and 'llu'. Returns number of written characters, or (size_t) -1 on error.

Parameters

info	The IO_CACHE to write to
fmt	format string
...	variable list of arguments

Returns

number of bytes written, -1 if an error occurred

my_b_read()

int my_b_read ( IO_CACHE *  info, uchar *  buffer, size_t  count  )

inline

my_b_safe_write()

int my_b_safe_write	(	IO_CACHE *	info,
		const uchar *	Buffer,
		size_t	Count
	)

my_b_seek()

void my_b_seek	(	IO_CACHE *	info,
		my_off_t	pos
	)

my_b_tell()

my_off_t my_b_tell ( const IO_CACHE *  info )

inline

my_b_vprintf()

size_t my_b_vprintf	(	IO_CACHE *	info,
		const char *	fmt,
		va_list	args
	)

Implementation of my_b_printf.

Parameters

info	The IO_CACHE to write to
fmt	format string
args	variable list of arguments

Returns

number of bytes written, -1 if an error occurred

my_b_write()

int my_b_write ( IO_CACHE *  info, const uchar *  buffer, size_t  count  )

inline

my_block_write()

int my_block_write	(	IO_CACHE *	info,
		const uchar *	Buffer,
		size_t	Count,
		my_off_t	pos
	)

my_charset_get_by_name()

CHARSET_INFO * my_charset_get_by_name	(	const char *	cs_name,
		uint	cs_flags,
		myf	flags,
		MY_CHARSET_ERRMSG *	errmsg
	)

Find character set by name: extended version of get_charset_by_csname() to return error messages to the caller.

Parameters

[in]	cs_name	Collation name
[in]	cs_flags	Character set flags (e.g. default or binary collation)
[in]	flags	Flags
[out]	errmsg	Error message buffer (if any)

Returns

NULL on error, pointer to collation on success

my_chmod()

bool my_chmod	(	const char *	filename,
		ulong	perm_flags,
		myf	my_flags
	)

my_chsize()

int my_chsize	(	File	fd,
		my_off_t	newlength,
		int	filler,
		myf	MyFlags
	)

Change size of file.

Truncates file if shorter else fill with the filler character. The function also changes the file pointer. Usually it points to the end of the file after execution.

Parameters

fd	File descriptor
newlength	New file size
filler	if we don't have truncate, fill up all bytes after new_length with this character
MyFlags	Flags

Return values

0	Ok
1	Error

my_close()

int my_close	(	File	fd,
		myf	MyFlags
	)

Close a file.

Parameters

fd	File sescriptor
MyFlags	Special Flags

Return values

0	if successful
-1	in case of errors

my_closelog()

int my_closelog

(

void

)

Closes/de-registers the system logging handle.

Note: Its a thread-unsafe function. It should either be invoked from the main thread or some extra thread safety measures need to be taken.

Returns

0 Success -1 Error

my_collation_get_by_name()

CHARSET_INFO * my_collation_get_by_name	(	const char *	collation_name,
		myf	flags,
		MY_CHARSET_ERRMSG *	errmsg
	)

Find collation by name: extended version of get_charset_by_name() to return error messages to the caller.

Parameters

[in]	collation_name	Collation name
[in]	flags	Flags
[out]	errmsg	Error message buffer (if any)

Returns

NULL on error, pointer to collation on success

my_compress()

bool my_compress	(	mysql_compress_context *	comp_ctx,
		uchar *	packet,
		size_t *	len,
		size_t *	complen
	)

This replaces the packet with a compressed packet.

Parameters

[in]	comp_ctx	Compress context
[in,out]	packet	Data to compress. This is replaced with the compressed data.
[in]	len	Length of data to compress at 'packet'
[out]	complen	Compressed packet length. 0, if packet was not compressed

Return values

1	error. 'len' is not changed
0	ok. 'len' contains the size of the compressed packet

my_compress_alloc()

uchar * my_compress_alloc	(	mysql_compress_context *	comp_ctx,
		const uchar *	packet,
		size_t *	len,
		size_t *	complen
	)

my_copy()

int my_copy	(	const char *	from,
		const char *	to,
		myf	MyFlags
	)

my_create()

File my_create	(	const char *	FileName,
		int	CreateFlags,
		int	AccessFlags,
		myf	MyFlags
	)

Create a new file.

Parameters

FileName	Path-name of file
CreateFlags	Read | write on file (umask value)
AccessFlags	Read & Write on open file
MyFlags	Special flags

Return values

File	descriptor on Posix
FileInfo	index on Windows.
-1	in case of errors.

my_create_with_symlink()

File my_create_with_symlink	(	const char *	linkname,
		const char *	filename,
		int	createflags,
		int	access_flags,
		myf	MyFlags
	)

my_delete()

int my_delete	(	const char *	name,
		myf	MyFlags
	)

my_delete_with_symlink()

int my_delete_with_symlink	(	const char *	name,
		myf	MyFlags
	)

my_end()

void my_end

(

int

infoflag

)

my_error()

void my_error	(	int	nr,
		myf	MyFlags,
			...
	)

Fill in and print a previously registered error message.

Note

Goes through the (sole) function registered in error_handler_hook

Parameters

nr	error number
MyFlags	Flags
...	variable list matching that error format string

my_error_register()

int my_error_register	(	const char *(*)(int)	get_errmsg,
		int	first,
		int	last
	)

Register error messages for use with my_error().

The function is expected to return addresses to NUL-terminated C character strings. NULL pointers and empty strings ("") are allowed. These will be mapped to "Unknown error" when my_error() is called with a matching error number. This function registers the error numbers 'first' to 'last'. No overlapping with previously registered error numbers is allowed.

Parameters

get_errmsg	function that returns error messages
first	error number of first message in the array
last	error number of last message in the array

Return values

0	OK
!=	0 Error

my_error_unregister()

bool my_error_unregister	(	int	first,
		int	last
	)

Unregister formerly registered error messages.

This function unregisters the error numbers 'first' to 'last'. These must have been previously registered by my_error_register(). 'first' and 'last' must exactly match the registration. If a matching registration is present, the header is removed from the list.

Parameters

first	error number of first message
last	error number of last message

Return values

true	Error, no such number range registered.
false	OK

my_fallocator()

int my_fallocator	(	File	fd,
		my_off_t	newlength,
		int	filler,
		myf	MyFlags
	)

Change size of the specified file.

Forces the OS to reserve disk space for the file, even when called to fill with zeros. The function also changes the file position. Usually it points to the end of the file after execution.

Note

Implementation based on, and mostly copied from, my_chsize. But instead of ftruncate uses posix_fallocate. This implementation was needed because of allocation in temptable. Probably this implementation should replace my_chsize implementation.

Parameters

[in]	fd	File descriptor
[in]	newlength	New file size
[in]	filler	Fill up all bytes after new_length with this character
[in]	MyFlags	Flags

Returns

0 if OK, 1 otherwise

my_fclose()

int my_fclose	(	FILE *	stream,
		myf	MyFlags
	)

Close a stream.

Parameters

stream	FILE stream to close.
MyFlags	Flags controlling error reporting.

Return values

0	on success
-1	on error

my_fdopen()

FILE * my_fdopen	(	File	fd,
		const char *	filename,
		int	flags,
		myf	MyFlags
	)

Make a stream out of a file handle.

Parameters

fd	File descriptor to open a stream to.
filename	Name of file to which the fd refers. May be nullptr.
flags	Numeric open mode flags (will be converted to string and passed to fdopen)
MyFlags	Flags for error handling

Return values

nullptr	in case of errors
FILE	stream if successful

my_filename()

const char * my_filename

(

File

fd

)

Get filename of file.

Parameters

fd	file descriptor

Returns

file name in file_info object

my_fileno()

File my_fileno

(

FILE *

stream

)

Portable fileno() wrapper.

my_fopen()

FILE * my_fopen	(	const char *	filename,
		int	flags,
		myf	MyFlags
	)

Open a file as stream.

Parameters

filename	Path-name of file
flags	Read | write | append | trunc (like for open())
MyFlags	Flags for handling errors

Return values

nullptr	in case of errors
FILE	pointer otherwise

my_fread()

size_t my_fread	(	FILE *	stream,
		uchar *	Buffer,
		size_t	Count,
		myf	MyFlags
	)

Read a chunk of bytes from a FILE stream.

Parameters

stream	Source
Buffer	Destination
Count	Number of bytes to read
MyFlags	Flags for error handling

Return values

Number	of bytes read
MY_FILE_ERROR	in case of errors

my_freopen()

FILE * my_freopen	(	const char *	filename,
		const char *	mode,
		FILE *	stream
	)

Change the file associated with a file stream.

Parameters

filename	Path to file.
mode	Mode of the stream.
stream	File stream.

Note

This function is used to redirect stdout and stderr to a file and subsequently to close and reopen that file for log rotation.

Return values

A	FILE pointer on success. Otherwise, NULL.

my_fseek()

my_off_t my_fseek	(	FILE *	stream,
		my_off_t	pos,
		int	whence
	)

Seek to position in FILE stream.

Note that the semantics differ from normal fseek() in that it returns the new position, and not just 0/-1 to indicate success/failure.

Parameters

stream	to seek in
pos	offset into stream
whence	where to seek from

Return values

new	offset in stream
MY_FILEPOS_ERROR	in case of errors

my_ftell()

my_off_t my_ftell

(

FILE *

stream

)

Portable ftell() wrapper.

my_fwrite()

size_t my_fwrite	(	FILE *	stream,
		const uchar *	Buffer,
		size_t	Count,
		myf	MyFlags
	)

Write a chunk of bytes to a FILE stream.

Parameters

stream	Destination
Buffer	Source
Count	Number of bytes to write
MyFlags	Flags for error handling

Return values

Number	of bytes written
MY_FILE_ERROR	in case of errors

my_get_err_msg()

const char * my_get_err_msg

(

int

nr

)

Get an error format string from one of the my_error_register()ed sets.

Note

NULL values are possible even within a registered range.

Parameters

nr

Errno

Return values

NULL	if no message is registered for this error number
str	C-string

my_get_large_page_size()

uint my_get_large_page_size

(

void

)

my_get_ptr()

my_off_t my_get_ptr	(	uchar *	ptr,
		size_t	pack_length
	)

my_gethwaddr()

bool my_gethwaddr

(

uchar *

to

)

my_getpagesize()

static int my_getpagesize ( )

inlinestatic

my_getwd()

int my_getwd	(	char *	buf,
		size_t	size,
		myf	MyFlags
	)

my_init()

bool my_init

(

void

)

Initialize my_sys functions, resources and variables.

Returns

Initialization result

Return values

false	Success
true	Error. Couldn't initialize environment

my_init_dynamic_array()

bool my_init_dynamic_array	(	DYNAMIC_ARRAY *	array,
		PSI_memory_key	key,
		uint	element_size,
		void *	init_buffer,
		uint	init_alloc,
		uint	alloc_increment
	)

my_init_mysys_psi_keys()

void my_init_mysys_psi_keys

(

void

)

my_is_same_file()

int my_is_same_file	(	File	file,
		const ST_FILE_ID *	file_id
	)

Return non-zero if the file descriptor and a previously lstat-ed file identified by file_id point to the same file.

my_is_symlink()

int my_is_symlink	(	const char *	filename,
		ST_FILE_ID *	file_id
	)

my_load_path()

char * my_load_path	(	char *	to,
		const char *	path,
		const char *	own_path_prefix
	)

Returns full load-path for a file.

to may be = path.

Pre-condition: At least FN_REFLEN bytes can be stored in buffer pointed to by 'to'. 'path' and 'own_path_prefix' are '\0'-terminated byte buffers.

Post-condition: At most FN_REFLEN bytes will have been written to 'to'. If the combined length of 'from' and any expanded elements exceeds FN_REFLEN-1, the result is truncated and likely not what the caller expects.

Parameters

to	Pointer to destination which will hold the expanded path.
path	Pointer to buffer containing the supplied path.
own_path_prefix	Prefix to be appended to path.

Returns

to Pointer to the supplied destination buffer that will hold the full load-path.

my_message()

void my_message	(	uint	error,
		const char *	str,
		myf	MyFlags
	)

Print an error message.

Note

Goes through the (sole) function registered in error_handler_hook

Parameters

error	error number
str	error message
MyFlags	Flags

my_message_local()

void my_message_local	(	enum loglevel	ll,
		uint	ecode,
			...
	)

Issue a message locally (i.e.

on the same host the program is running on, don't transmit to a client).

This goes through local_message_hook, i.e. by default, it calls my_message_local_stderr() which prepends an Error/Warning/Note label to the string, then prints it to stderr using my_message_stderr(). More advanced programs can use their own printers; mysqld for instance uses its own error log facilities which prepend an ISO 8601 / RFC 3339 compliant timestamp etc.

Parameters

ll	log level: (ERROR|WARNING|INFORMATION)_LEVEL the printer may use these to filter for verbosity
ecode	Error code of a error message.
...	parameters to go with the error message.

my_message_local_stderr()

void my_message_local_stderr	(	enum loglevel	ll,
		uint	ecode,
		va_list	args
	)

Issue a message locally (i.e.

on the same host the program is running on, don't transmit to a client).

This is the default value for local_message_hook, and therefore the default printer for my_message_local(). mysys users should not call this directly, but go through my_message_local() instead.

This printer prepends an Error/Warning/Note label to the string, then prints it to stderr using my_message_stderr(). Since my_message_stderr() appends a '
', the format string should not end in a newline.

Parameters

ll	log level: (ERROR|WARNING|INFORMATION)_LEVEL the printer may use these to filter for verbosity
ecode	Error code of a error message.
args	parameters to go with the error message.

my_message_stderr()

void my_message_stderr	(	uint	error,
		const char *	str,
		myf	MyFlags
	)

Print an error message on stderr.

Prefixed with the binary's name (sans .exe, where applicable, and without path, both to keep our test cases sane). The name is intended to aid debugging by clarifying which binary reported an error, especially in cases like mysql_upgrade which calls several other tools whose messages should be distinguishable from each other's, and from mysql_upgrade's.

This is low-level; in most cases, you should use my_message_local() instead (which by default goes through my_message_local_stderr(), which is a wrapper around this function that adds a severity level).

Parameters

error	The error number. Currently unused.
str	The message to print. Not trailing needed.
MyFlags	ME_BELL to beep, or 0.

my_mkdir()

int my_mkdir	(	const char *	dir,
		int	Flags,
		myf	MyFlags
	)

my_msync()

int my_msync	(	int	fd,
		void *	addr,
		size_t	len,
		int	flags
	)

my_multi_malloc()

void * my_multi_malloc	(	PSI_memory_key	key,
		myf	flags,
			...
	)

my_once_alloc()

void * my_once_alloc	(	size_t	Size,
		myf	MyFlags
	)

my_once_free()

void my_once_free

(

void

)

my_once_memdup()

void * my_once_memdup	(	const void *	src,
		size_t	len,
		myf	myflags
	)

my_once_strdup()

char * my_once_strdup	(	const char *	src,
		myf	myflags
	)

my_open()

File my_open	(	const char *	filename,
		int	Flags,
		myf	MyFlags
	)

Open a file.

Parameters

filename	Fully qualified file name
Flags	Read | write
MyFlags	Special flags

Return values

File	descriptor if successful
-1	in case of errors

my_openlog()

int my_openlog	(	const char *	name,
		int	option,
		int	facility
	)

Opens/Registers a new handle for system logging.

Note: It's a thread-unsafe function. It should either be invoked from the main thread or some extra thread safety measures need to be taken.

Parameters

name	Name of the event source / syslog ident.
option	MY_SYSLOG_PIDS to log PID with each message.
facility	Type of program. Passed to openlog().

Returns

0 Success -1 Error, log not opened -2 Error, not updated, using previous values

my_path()

char * my_path	(	char *	to,
		const char *	progname,
		const char *	own_pathname_part
	)

my_physical_memory()

unsigned long long my_physical_memory

(

)

my_pread()

size_t my_pread	(	File	Filedes,
		uchar *	Buffer,
		size_t	Count,
		my_off_t	offset,
		myf	MyFlags
	)

Read a chunk of bytes from a file from a given position.

Note

This differs from the normal pread() call in that we don't care to set the position in the file back to the original position if the system doesn't support pread().

Parameters

Filedes	File descriptor
Buffer	Buffer to read data into
Count	Number of bytes to read
offset	Position to read from
MyFlags	Flags

Return values

MY_FILE_ERROR	in case of error
Number	of bytes read, otherwise

my_printf_error()

void my_printf_error	(	uint	error,
		const char *	format,
		myf	MyFlags,
			...
	)

Print an error message.

Note

Goes through the (sole) function registered in error_handler_hook

Parameters

error	error number
format	format string
MyFlags	Flags
...	variable list matching that error format string

my_printv_error()

void my_printv_error	(	uint	error,
		const char *	format,
		myf	MyFlags,
		va_list	ap
	)

Print an error message.

Note

Goes through the (sole) function registered in error_handler_hook

Parameters

error	error number
format	format string
MyFlags	Flags
ap	variable list matching that error format string

my_pwrite()

size_t my_pwrite	(	File	Filedes,
		const uchar *	Buffer,
		size_t	Count,
		my_off_t	offset,
		myf	MyFlags
	)

Write a chunk of bytes to a file at a given position.

Note

This differs from the normal pwrite() call in that we don't care to set the position in the file back to the original position if the system doesn't support pwrite()

Parameters

Filedes	File descriptor
Buffer	Buffer to write data from
Count	Number of bytes to write
offset	Position to write to
MyFlags	Flags

Returns

If Count == 0, returns 0. If failure, (size_t)-1 == MY_FILE_ERROR. Behavior otherwise depends on MyFlags:

if (MyFlags & (MY_NABP | MY_FNABP)) On success, 0 otherwise On success or partial success, the number of bytes actually written (which can be less than Count).

my_read()

size_t my_read	(	File	fd,
		uchar *	Buffer,
		size_t	Count,
		myf	MyFlags
	)

Read a chunk of bytes from a file with retry's if needed If flag MY_FULL_IO is set then keep reading until EOF is found.

Parameters

	fd	File descriptor to read from
[out]	Buffer	Buffer to hold at least Count bytes
	Count	Bytes to read
	MyFlags	Flags on what to do on error

Returns

Operation status

Return values

-1	on error
0	if flag has bits MY_NABP or MY_FNABP set
N	number of bytes read

my_readlink()

int my_readlink	(	char *	to,
		const char *	filename,
		myf	MyFlags
	)

my_realpath()

int my_realpath	(	char *	to,
		const char *	filename,
		myf	MyFlags
	)

my_rename()

int my_rename	(	const char *	from,
		const char *	to,
		myf	MyFlags
	)

my_rename_with_symlink()

int my_rename_with_symlink	(	const char *	from,
		const char *	to,
		myf	MyFlags
	)

my_seek()

my_off_t my_seek	(	File	fd,
		my_off_t	pos,
		int	whence,
		myf	MyFlags
	)

Seek to a position in a file.

The my_seek function is a wrapper around the system call lseek and repositions the offset of the file descriptor fd to the argument offset according to the directive whence as follows: SEEK_SET The offset is set to offset bytes. SEEK_CUR The offset is set to its current location plus offset bytes SEEK_END The offset is set to the size of the file plus offset bytes

Parameters

fd	The file descriptor
pos	The expected position (absolute or relative)
whence	A direction parameter and one of {SEEK_SET, SEEK_CUR, SEEK_END}
MyFlags	flags to control error handling.

Return values

newpos	The new position in the file.
MY_FILEPOS_ERROR	An error was encountered while performing the seek. my_errno is set to indicate the actual error.

my_set_max_open_files()

uint my_set_max_open_files

(

uint

files

)

Sets the OS limit on the number of open files (if supported).

Parameters

files

Number of requested files

Returns

The actual new OS limit which may be both more or less than what was requested.

my_setwd()

int my_setwd	(	const char *	dir,
		myf	MyFlags
	)

my_store_ptr()

void my_store_ptr	(	uchar *	buff,
		size_t	pack_length,
		my_off_t	pos
	)

my_strerror()

char * my_strerror	(	char *	buf,
		size_t	len,
		int	nr
	)

Get a string describing a system or handler error.

thread-safe.

Parameters

buf	a buffer in which to return the error message
len	the size of the aforementioned buffer
nr	the error number

Returns

buf always buf. for signature compatibility with strerror(3).

my_symlink()

int my_symlink	(	const char *	content,
		const char *	linkname,
		myf	MyFlags
	)

my_sync()

int my_sync	(	File	fd,
		myf	my_flags
	)

my_syslog()

int my_syslog	(	const CHARSET_INFO *	cs,
		enum loglevel	level,
		const char *	msg
	)

Sends message to the system logger.

On Windows, the specified message is internally converted to UCS-2 encoding, while on other platforms, no conversion takes place and the string is passed to the syslog API as it is.

Parameters

cs	Character set info of the message string
level	Log level
msg	Message to be logged (C-string)

Returns

0 Success -1 Error

my_tell()

my_off_t my_tell	(	File	fd,
		myf	MyFlags
	)

my_tmpdir()

char * my_tmpdir

(

MY_TMPDIR *

tmpdir

)

my_uncompress()

bool my_uncompress	(	mysql_compress_context *	comp_ctx,
		uchar *	packet,
		size_t	len,
		size_t *	complen
	)

Uncompress packet.

Parameters

	comp_ctx	Pointer to compression context.
	packet	Compressed data. This is is replaced with the original data.
	len	Length of compressed data
[out]	complen	Length of the packet buffer after uncompression (must be enough for the original data)

Returns

true on error else false on success

my_write()

size_t my_write	(	File	Filedes,
		const uchar *	Buffer,
		size_t	Count,
		myf	MyFlags
	)

Write a chunk of bytes to a file.

if (MyFlags & (MY_NABP | MY_FNABP)) returns 0 if Count == 0 On success, 0 On failure, (size_t)-1 == MY_FILE_ERROR

otherwise returns 0 if Count == 0 On success, the number of bytes written. On partial success (if less than Count bytes could be written), the actual number of bytes written. On failure, (size_t)-1 == MY_FILE_ERROR

MyOsError()

template<class... Ts>

void MyOsError ( int  errno_val, Ts...  ppck  )

inline

Convenience wrapper for OS error messages which report errno/my_errno with d followed by strerror as s, as the last conversions in the error message.

The OS error message (my_errno) is formatted in a stack buffer and the errno value and a pointer to the buffer is added to the end of the parameter pack passed to my_error().

Parameters

errno_val	errno/my_errno number.
ppck	parameter pack of additional arguments to pass to my_error().

normalize_dirname()

size_t normalize_dirname	(	char *	to,
		const char *	from
	)

Convert a directory name to a format which can be compared as strings.

Pre-condition: At least FN_REFLEN bytes can be stored in buffer pointed to by 'to'. 'from' is a '\0'-terminated byte buffer.

Post-condition: At most FN_REFLEN bytes will have been written to 'to'. If the combined length of 'from' and any expanded elements exceeds FN_REFLEN-1, the result is truncated and likely not what the caller expects.

Parameters

to	result buffer, FN_REFLEN chars in length; may be == from
from	'packed' directory name, in whatever format

Returns

size of the normalized name

• Ensures that last char is FN_LIBCHAR, unless it is FN_DEVCHAR
• Uses cleanup_dirname

Note

It does not expand ~/ (although, see cleanup_dirname). Nor does it do any case folding. All case-insensitive normalization should be done by the caller.

open_cached_file()

bool open_cached_file	(	IO_CACHE *	cache,
		const char *	dir,
		const char *	prefix,
		size_t	cache_size,
		myf	cache_myflags
	)

real_open_cached_file()

bool real_open_cached_file

(

IO_CACHE *

cache

)

reinit_io_cache()

bool reinit_io_cache	(	IO_CACHE *	info,
		enum cache_type	type,
		my_off_t	seek_offset,
		bool	use_async_io,
		bool	clear_cache
	)

remove_io_thread()

void remove_io_thread

(

IO_CACHE *

info

)

resolve_charset()

bool resolve_charset	(	const char *	cs_name,
		const CHARSET_INFO *	default_cs,
		const CHARSET_INFO **	cs
	)

Resolve character set by the character set name (utf8, latin1, ...).

The function tries to resolve character set by the specified name. If there is character set with the given name, it is assigned to the "cs" parameter and false is returned. If there is no such character set, "default_cs" is assigned to the "cs" and true is returned.

Parameters

[in]	cs_name	Character set name.
[in]	default_cs	Default character set.
[out]	cs	Variable to store character set.

Returns

false if character set was resolved successfully; true if there is no character set with given name.

resolve_collation()

bool resolve_collation	(	const char *	cl_name,
		const CHARSET_INFO *	default_cl,
		const CHARSET_INFO **	cl
	)

Resolve collation by the collation name (utf8_general_ci, ...).

The function tries to resolve collation by the specified name. If there is collation with the given name, it is assigned to the "cl" parameter and false is returned. If there is no such collation, "default_cl" is assigned to the "cl" and true is returned.

Parameters

[out]	cl	Variable to store collation.
[in]	cl_name	Collation name.
[in]	default_cl	Default collation.

Returns

false if collation was resolved successfully; true if there is no collation with given name.

safe_strdup_root()

char * safe_strdup_root	(	MEM_ROOT *	root,
		const char *	str
	)

set_psi_cond_service()

void set_psi_cond_service

(

void *

psi

)

set_psi_data_lock_service()

void set_psi_data_lock_service

(

void *

psi

)

set_psi_error_service()

void set_psi_error_service

(

void *

psi

)

set_psi_file_service()

void set_psi_file_service

(

void *

psi

)

set_psi_idle_service()

void set_psi_idle_service

(

void *

psi

)

set_psi_mdl_service()

void set_psi_mdl_service

(

void *

psi

)

set_psi_memory_service()

void set_psi_memory_service

(

void *

psi

)

set_psi_metric_service()

void set_psi_metric_service

(

void *

psi

)

set_psi_mutex_service()

void set_psi_mutex_service

(

void *

psi

)

set_psi_rwlock_service()

void set_psi_rwlock_service

(

void *

psi

)

set_psi_socket_service()

void set_psi_socket_service

(

void *

psi

)

set_psi_stage_service()

void set_psi_stage_service

(

void *

psi

)

set_psi_statement_service()

void set_psi_statement_service

(

void *

psi

)

set_psi_system_service()

void set_psi_system_service

(

void *

psi

)

set_psi_table_service()

void set_psi_table_service

(

void *

psi

)

set_psi_thread_service()

void set_psi_thread_service

(

void *

psi

)

set_psi_tls_channel_service()

void set_psi_tls_channel_service

(

void *

psi

)

set_psi_transaction_service()

void set_psi_transaction_service

(

void *

psi

)

setup_io_cache()

void setup_io_cache

(

IO_CACHE *

info

)

strdup_root()

char * strdup_root	(	MEM_ROOT *	root,
		const char *	str
	)

strlength()

size_t strlength

(

const char *

str

)

Calculate the length of str not including any trailing ' '-bytes.

Pre-condition: 'str' is a '\0'-terminated byte buffer.

Parameters

str	input to calculate the length of.

Returns

length of string with end-space:s not counted.

strmake_root()

char * strmake_root	(	MEM_ROOT *	root,
		const char *	str,
		size_t	len
	)

system_filename()

size_t system_filename	(	char *	to,
		const char *	from
	)

Convert filename (unix standard) to system standard Used before system command's like open(), create()

Pre-condition: At least FN_REFLEN bytes can be stored in buffer pointed to by 'to'. 'from' is a '\0'-terminated byte buffer.

Post-condition: At most FN_REFLEN bytes will have been written to 'to'. If the combined length of 'from' and any expanded elements exceeds FN_REFLEN-1, the result is truncated and likely not what the caller expects.

Parameters

to	destination buffer.
from	source string.

Returns

used length of to

test_if_hard_path()

int test_if_hard_path

(

const char *

dir_name

)

thr_set_sync_wait_callback()

void thr_set_sync_wait_callback	(	void(*)(void)	before_sync,
		void(*)(void)	after_sync
	)

to_unix_path()

void to_unix_path

(

char *

to

)

Convert filename to unix style filename.

Remarks

On Windows, converts '\' to '/'.

Parameters

to	A pathname.

unpack_dirname()

size_t unpack_dirname	(	char *	to,
		const char *	from
	)

Fixes a directory name so that can be used by open().

Pre-condition: At least FN_REFLEN bytes can be stored in buffer pointed to by 'to'. 'from' is a '\0'-terminated byte buffer.

Post-condition: At most FN_REFLEN bytes will have been written to 'to'. If the combined length of 'from' and any expanded elements exceeds FN_REFLEN-1, the result is truncated and likely not what the caller expects.

Parameters

to	Result buffer, FN_REFLEN characters. May be == from
from	'Packed' directory name (may contain ~)

• Uses normalize_dirname()
• Expands ~/... to home_dir/...
• Changes a UNIX filename to system filename (replaces / with \ on windows)

Returns

Length of new directory name (= length of to)

unpack_filename()

size_t unpack_filename	(	char *	to,
		const char *	from
	)

Fix filename so it can be used by open, create.

Pre-condition: At least FN_REFLEN bytes can be stored in buffer pointed to by 'to'. 'from' is a '\0'-terminated byte buffer.

Post-condition: At most FN_REFLEN bytes will have been written to 'to'. If the combined length of 'from' and any expanded elements exceeds FN_REFLEN-1, the result is truncated and likely not what the caller expects.

Note

to may be == from

~ will only be expanded if total length < FN_REFLEN

Parameters

to	Store result here. Must be at least of size FN_REFLEN.
from	Filename in unix format (with ~)

Returns

# length of to

wait_for_free_space()

void wait_for_free_space	(	const char *	filename,
		int	errors
	)

Variable Documentation

all_charsets

MYSQL_PLUGIN_IMPORT const CHARSET_INFO* all_charsets[MY_ALL_CHARSETS_SIZE]

extern

charsets_dir

const char* charsets_dir

extern

default_charset_info

MYSQL_PLUGIN_IMPORT CHARSET_INFO* default_charset_info

extern

enter_cond_hook

void(* enter_cond_hook) (void *opaque_thd, mysql_cond_t *cond, mysql_mutex_t *mutex, const PSI_stage_info *stage, PSI_stage_info *old_stage, const char *src_function, const char *src_file, int src_line) ( void *  opaque_thd, mysql_cond_t *  cond, mysql_mutex_t *  mutex, const PSI_stage_info *  stage, PSI_stage_info *  old_stage, const char *  src_function, const char *  src_file, int  src_line  )

extern

enter_stage_hook

void(* enter_stage_hook) (void *opaque_thd, const PSI_stage_info *new_stage, PSI_stage_info *old_stage, const char *src_function, const char *src_file, int src_line) ( void *  opaque_thd, const PSI_stage_info *  new_stage, PSI_stage_info *  old_stage, const char *  src_function, const char *  src_file, int  src_line  )

extern

error_handler_hook

std::atomic<ErrorHandlerFunctionPointer> error_handler_hook

extern

exit_cond_hook

void(* exit_cond_hook) (void *opaque_thd, const PSI_stage_info *stage, const char *src_function, const char *src_file, int src_line) ( void *  opaque_thd, const PSI_stage_info *  stage, const char *  src_function, const char *  src_file, int  src_line  )

extern

home_dir

char* home_dir

extern

is_killed_hook

int(* is_killed_hook) (const void *opaque_thd) ( const void *  opaque_thd )

extern

key_file_io_cache

PSI_file_key key_file_io_cache

extern

key_memory_max_alloca

PSI_memory_key key_memory_max_alloca

extern

local_message_hook

void(* local_message_hook) (enum loglevel ll, uint ecode, va_list args) ( enum loglevel  ll, uint  ecode, va_list  args  )

extern

my_b_EOF

constexpr int my_b_EOF = INT_MIN

constexpr

my_charset_error_reporter

my_error_vreporter my_charset_error_reporter

extern

my_default_record_cache_size

ulong my_default_record_cache_size

extern

my_disable_locking

bool my_disable_locking

extern

my_enable_symlinks

bool my_enable_symlinks

my_file_opened

ulong my_file_opened

extern

my_file_total_opened

ulong my_file_total_opened

extern

my_init_done

bool my_init_done

extern

my_progname

const char* my_progname

extern

my_stream_opened

ulong my_stream_opened

extern

my_thread_stack_size

MYSQL_PLUGIN_IMPORT ulong my_thread_stack_size

extern

my_tmp_file_created

ulong my_tmp_file_created

extern

my_umask

MYSQL_PLUGIN_IMPORT int my_umask

extern

my_umask_dir

int my_umask_dir

extern

psi_cond_hook

MYSQL_PLUGIN_IMPORT PSI_cond_bootstrap* psi_cond_hook

extern

psi_data_lock_hook

MYSQL_PLUGIN_IMPORT PSI_data_lock_bootstrap* psi_data_lock_hook

extern

psi_error_hook

MYSQL_PLUGIN_IMPORT PSI_error_bootstrap* psi_error_hook

extern

psi_file_hook

MYSQL_PLUGIN_IMPORT PSI_file_bootstrap* psi_file_hook

extern

psi_idle_hook

MYSQL_PLUGIN_IMPORT PSI_idle_bootstrap* psi_idle_hook

extern

psi_mdl_hook

MYSQL_PLUGIN_IMPORT PSI_mdl_bootstrap* psi_mdl_hook

extern

psi_memory_hook

MYSQL_PLUGIN_IMPORT PSI_memory_bootstrap* psi_memory_hook

extern

psi_metric_hook

MYSQL_PLUGIN_IMPORT PSI_metric_bootstrap* psi_metric_hook

extern

psi_mutex_hook

MYSQL_PLUGIN_IMPORT PSI_mutex_bootstrap* psi_mutex_hook

extern

psi_rwlock_hook

MYSQL_PLUGIN_IMPORT PSI_rwlock_bootstrap* psi_rwlock_hook

extern

psi_socket_hook

MYSQL_PLUGIN_IMPORT PSI_socket_bootstrap* psi_socket_hook

extern

psi_stage_hook

MYSQL_PLUGIN_IMPORT PSI_stage_bootstrap* psi_stage_hook

extern

psi_statement_hook

MYSQL_PLUGIN_IMPORT PSI_statement_bootstrap* psi_statement_hook

extern

psi_system_hook

MYSQL_PLUGIN_IMPORT PSI_system_bootstrap* psi_system_hook

extern

psi_table_hook

MYSQL_PLUGIN_IMPORT PSI_table_bootstrap* psi_table_hook

extern

psi_thread_hook

MYSQL_PLUGIN_IMPORT PSI_thread_bootstrap* psi_thread_hook

extern

psi_tls_channel_hook

MYSQL_PLUGIN_IMPORT PSI_tls_channel_bootstrap* psi_tls_channel_hook

extern

psi_transaction_hook

MYSQL_PLUGIN_IMPORT PSI_transaction_bootstrap* psi_transaction_hook

extern

set_waiting_for_disk_space_hook

void(* set_waiting_for_disk_space_hook) (void *opaque_thd, bool waiting) ( void *  opaque_thd, bool  waiting  )

extern