MySQL 5.6 Release Notes
The MySQL server writes some error messages to its error log, and sends others to client programs.
Example server-side error messages written to the error log:
2018-08-29 08:27:31 16664 [Note] Event Scheduler: scheduler
thread started with id 1
2018-10-02 03:20:39 0 [ERROR] Can't open the mysql.plugin
table. Please run mysql_upgrade to create it.Example server-side error message sent to client programs, as displayed by the mysql client:
mysql> SELECT * FROM no_such_table;
ERROR 1146 (42S02): Table 'test.no_such_table' doesn't existEach server error message includes an error code, SQLSTATE value, and message string, as described in Section B.1, “Error Message Sources and Components”. These components are available as described in Section B.2, “Error Information Interfaces”.
In addition to the errors in the following list, the server can also produce error messages that have error codes in the range from 1 to 999. See Section B.3.3, “Global Error Message Reference”
Error number:
1000; Symbol:ER_HASHCHK; SQLSTATE:HY000Message: hashchk
Unused.
Error number:
1001; Symbol:ER_NISAMCHK; SQLSTATE:HY000Message: isamchk
Unused.
Error number:
1002; Symbol:ER_NO; SQLSTATE:HY000Message: NO
Used in the construction of other messages.
Error number:
1003; Symbol:ER_YES; SQLSTATE:HY000Message: YES
Used in the construction of other messages.
Extended
EXPLAINformat generates Note messages.ER_YESis used in theCodecolumn for these messages in subsequentSHOW WARNINGSoutput.Error number:
1004; Symbol:ER_CANT_CREATE_FILE; SQLSTATE:HY000Message: Can't create file '%s' (errno: %d - %s)
Occurs for failure to create or copy a file needed for some operation.
Possible causes: Permissions problem for source file; destination file already exists but is not writeable.
Error number:
1005; Symbol:ER_CANT_CREATE_TABLE; SQLSTATE:HY000Message: Can't create table '%s' (errno: %d)
InnoDBreports this error when a table cannot be created. If the error message refers to error 150, table creation failed because a foreign key constraint was not correctly formed. If the error message refers to error −1, table creation probably failed because the table includes a column name that matched the name of an internalInnoDBtable.Error number:
1006; Symbol:ER_CANT_CREATE_DB; SQLSTATE:HY000Message: Can't create database '%s' (errno: %d)
Error number:
1007; Symbol:ER_DB_CREATE_EXISTS; SQLSTATE:HY000Message: Can't create database '%s'; database exists
An attempt to create a database failed because the database already exists.
Drop the database first if you really want to replace an existing database, or add an
IF NOT EXISTSclause to theCREATE DATABASEstatement if to retain an existing database without having the statement produce an error.Error number:
1008; Symbol:ER_DB_DROP_EXISTS; SQLSTATE:HY000Message: Can't drop database '%s'; database doesn't exist
Error number:
1009; Symbol:ER_DB_DROP_DELETE; SQLSTATE:HY000Message: Error dropping database (can't delete '%s', errno: %d)
Error number:
1010; Symbol:ER_DB_DROP_RMDIR; SQLSTATE:HY000Message: Error dropping database (can't rmdir '%s', errno: %d)
Error number:
1011; Symbol:ER_CANT_DELETE_FILE; SQLSTATE:HY000Message: Error on delete of '%s' (errno: %d - %s)
Error number:
1012; Symbol:ER_CANT_FIND_SYSTEM_REC; SQLSTATE:HY000Message: Can't read record in system table
Returned by
InnoDBfor attempts to accessInnoDBINFORMATION_SCHEMAtables whenInnoDBis unavailable.Error number:
1013; Symbol:ER_CANT_GET_STAT; SQLSTATE:HY000Message: Can't get status of '%s' (errno: %d - %s)
Error number:
1014; Symbol:ER_CANT_GET_WD; SQLSTATE:HY000Message: Can't get working directory (errno: %d - %s)
Error number:
1015; Symbol:ER_CANT_LOCK; SQLSTATE:HY000Message: Can't lock file (errno: %d - %s)
Error number:
1016; Symbol:ER_CANT_OPEN_FILE; SQLSTATE:HY000Message: Can't open file: '%s' (errno: %d - %s)
InnoDBreports this error when the table from theInnoDBdata files cannot be found, even though the.frmfile for the table exists. See Section 14.21.3, “Troubleshooting InnoDB Data Dictionary Operations”.Error number:
1017; Symbol:ER_FILE_NOT_FOUND; SQLSTATE:HY000Message: Can't find file: '%s' (errno: %d - %s)
Error number:
1018; Symbol:ER_CANT_READ_DIR; SQLSTATE:HY000Message: Can't read dir of '%s' (errno: %d - %s)
Error number:
1019; Symbol:ER_CANT_SET_WD; SQLSTATE:HY000Message: Can't change dir to '%s' (errno: %d - %s)
Error number:
1020; Symbol:ER_CHECKREAD; SQLSTATE:HY000Message: Record has changed since last read in table '%s'
Error number:
1021; Symbol:ER_DISK_FULL; SQLSTATE:HY000Message: Disk full (%s); waiting for someone to free some space... (errno: %d - %s)
Error number:
1022; Symbol:ER_DUP_KEY; SQLSTATE:23000Message: Can't write; duplicate key in table '%s'
Error number:
1023; Symbol:ER_ERROR_ON_CLOSE; SQLSTATE:HY000Message: Error on close of '%s' (errno: %d - %s)
Error number:
1024; Symbol:ER_ERROR_ON_READ; SQLSTATE:HY000Message: Error reading file '%s' (errno: %d - %s)
Error number:
1025; Symbol:ER_ERROR_ON_RENAME; SQLSTATE:HY000Message: Error on rename of '%s' to '%s' (errno: %d - %s)
Error number:
1026; Symbol:ER_ERROR_ON_WRITE; SQLSTATE:HY000Message: Error writing file '%s' (errno: %d - %s)
Error number:
1027; Symbol:ER_FILE_USED; SQLSTATE:HY000Message: '%s' is locked against change
Error number:
1028; Symbol:ER_FILSORT_ABORT; SQLSTATE:HY000Message: Sort aborted
Error number:
1029; Symbol:ER_FORM_NOT_FOUND; SQLSTATE:HY000Message: View '%s' doesn't exist for '%s'
Error number:
1030; Symbol:ER_GET_ERRNO; SQLSTATE:HY000Message: Got error %d from storage engine
Check the
%dvalue to see what the OS error means. For example, 28 indicates that you have run out of disk space.Error number:
1031; Symbol:ER_ILLEGAL_HA; SQLSTATE:HY000Message: Table storage engine for '%s' doesn't have this option
Error number:
1032; Symbol:ER_KEY_NOT_FOUND; SQLSTATE:HY000Message: Can't find record in '%s'
Error number:
1033; Symbol:ER_NOT_FORM_FILE; SQLSTATE:HY000Message: Incorrect information in file: '%s'
Error number:
1034; Symbol:ER_NOT_KEYFILE; SQLSTATE:HY000Message: Incorrect key file for table '%s'; try to repair it
Error number:
1035; Symbol:ER_OLD_KEYFILE; SQLSTATE:HY000Message: Old key file for table '%s'; repair it!
Error number:
1036; Symbol:ER_OPEN_AS_READONLY; SQLSTATE:HY000Message: Table '%s' is read only
Error number:
1037; Symbol:ER_OUTOFMEMORY; SQLSTATE:HY001Message: Out of memory; restart server and try again (needed %d bytes)
Error number:
1038; Symbol:ER_OUT_OF_SORTMEMORY; SQLSTATE:HY001Message: Out of sort memory, consider increasing server sort buffer size
Error number:
1039; Symbol:ER_UNEXPECTED_EOF; SQLSTATE:HY000Message: Unexpected EOF found when reading file '%s' (errno: %d - %s)
Error number:
1040; Symbol:ER_CON_COUNT_ERROR; SQLSTATE:08004Message: Too many connections
Error number:
1041; Symbol:ER_OUT_OF_RESOURCES; SQLSTATE:HY000Message: Out of memory; check if mysqld or some other process uses all available memory; if not, you may have to use 'ulimit' to allow mysqld to use more memory or you can add more swap space
Error number:
1042; Symbol:ER_BAD_HOST_ERROR; SQLSTATE:08S01Message: Can't get hostname for your address
Error number:
1043; Symbol:ER_HANDSHAKE_ERROR; SQLSTATE:08S01Message: Bad handshake
Error number:
1044; Symbol:ER_DBACCESS_DENIED_ERROR; SQLSTATE:42000Message: Access denied for user '%s'@'%s' to database '%s'
Error number:
1045; Symbol:ER_ACCESS_DENIED_ERROR; SQLSTATE:28000Message: Access denied for user '%s'@'%s' (using password: %s)
Error number:
1046; Symbol:ER_NO_DB_ERROR; SQLSTATE:3D000Message: No database selected
Error number:
1047; Symbol:ER_UNKNOWN_COM_ERROR; SQLSTATE:08S01Message: Unknown command
Error number:
1048; Symbol:ER_BAD_NULL_ERROR; SQLSTATE:23000Message: Column '%s' cannot be null
Error number:
1049; Symbol:ER_BAD_DB_ERROR; SQLSTATE:42000Message: Unknown database '%s'
Error number:
1050; Symbol:ER_TABLE_EXISTS_ERROR; SQLSTATE:42S01Message: Table '%s' already exists
Error number:
1051; Symbol:ER_BAD_TABLE_ERROR; SQLSTATE:42S02Message: Unknown table '%s'
Error number:
1052; Symbol:ER_NON_UNIQ_ERROR; SQLSTATE:23000Message: Column '%s' in %s is ambiguous
%s = column name %s = location of column (for example, "field list")Likely cause: A column appears in a query without appropriate qualification, such as in a select list or ON clause.
Examples:
mysql> SELECT i FROM t INNER JOIN t AS t2; ERROR 1052 (23000): Column 'i' in field list is ambiguous mysql> SELECT * FROM t LEFT JOIN t AS t2 ON i = i; ERROR 1052 (23000): Column 'i' in on clause is ambiguousResolution:
Qualify the column with the appropriate table name:
mysql> SELECT t2.i FROM t INNER JOIN t AS t2;Modify the query to avoid the need for qualification:
mysql> SELECT * FROM t LEFT JOIN t AS t2 USING (i);
Error number:
1053; Symbol:ER_SERVER_SHUTDOWN; SQLSTATE:08S01Message: Server shutdown in progress
Error number:
1054; Symbol:ER_BAD_FIELD_ERROR; SQLSTATE:42S22Message: Unknown column '%s' in '%s'
Error number:
1055; Symbol:ER_WRONG_FIELD_WITH_GROUP; SQLSTATE:42000Message: '%s' isn't in GROUP BY
Error number:
1056; Symbol:ER_WRONG_GROUP_FIELD; SQLSTATE:42000Message: Can't group on '%s'
Error number:
1057; Symbol:ER_WRONG_SUM_SELECT; SQLSTATE:42000Message: Statement has sum functions and columns in same statement
Error number:
1058; Symbol:ER_WRONG_VALUE_COUNT; SQLSTATE:21S01Message: Column count doesn't match value count
Error number:
1059; Symbol:ER_TOO_LONG_IDENT; SQLSTATE:42000Message: Identifier name '%s' is too long
Error number:
1060; Symbol:ER_DUP_FIELDNAME; SQLSTATE:42S21Message: Duplicate column name '%s'
Error number:
1061; Symbol:ER_DUP_KEYNAME; SQLSTATE:42000Message: Duplicate key name '%s'
Error number:
1062; Symbol:ER_DUP_ENTRY; SQLSTATE:23000Message: Duplicate entry '%s' for key %d
The message returned with this error uses the format string for
ER_DUP_ENTRY_WITH_KEY_NAME.Error number:
1063; Symbol:ER_WRONG_FIELD_SPEC; SQLSTATE:42000Message: Incorrect column specifier for column '%s'
Error number:
1064; Symbol:ER_PARSE_ERROR; SQLSTATE:42000Message: %s near '%s' at line %d
Error number:
1065; Symbol:ER_EMPTY_QUERY; SQLSTATE:42000Message: Query was empty
Error number:
1066; Symbol:ER_NONUNIQ_TABLE; SQLSTATE:42000Message: Not unique table/alias: '%s'
Error number:
1067; Symbol:ER_INVALID_DEFAULT; SQLSTATE:42000Message: Invalid default value for '%s'
Error number:
1068; Symbol:ER_MULTIPLE_PRI_KEY; SQLSTATE:42000Message: Multiple primary key defined
Error number:
1069; Symbol:ER_TOO_MANY_KEYS; SQLSTATE:42000Message: Too many keys specified; max %d keys allowed
Error number:
1070; Symbol:ER_TOO_MANY_KEY_PARTS; SQLSTATE:42000Message: Too many key parts specified; max %d parts allowed
Error number:
1071; Symbol:ER_TOO_LONG_KEY; SQLSTATE:42000Message: Specified key was too long; max key length is %d bytes
Error number:
1072; Symbol:ER_KEY_COLUMN_DOES_NOT_EXITS; SQLSTATE:42000Message: Key column '%s' doesn't exist in table
Error number:
1073; Symbol:ER_BLOB_USED_AS_KEY; SQLSTATE:42000Message: BLOB column '%s' can't be used in key specification with the used table type
Error number:
1074; Symbol:ER_TOO_BIG_FIELDLENGTH; SQLSTATE:42000Message: Column length too big for column '%s' (max = %lu); use BLOB or TEXT instead
Error number:
1075; Symbol:ER_WRONG_AUTO_KEY; SQLSTATE:42000Message: Incorrect table definition; there can be only one auto column and it must be defined as a key
Error number:
1076; Symbol:ER_READY; SQLSTATE:HY000Message: %s: ready for connections. Version: '%s' socket: '%s' port: %d
Error number:
1077; Symbol:ER_NORMAL_SHUTDOWN; SQLSTATE:HY000Message: %s: Normal shutdown
Error number:
1078; Symbol:ER_GOT_SIGNAL; SQLSTATE:HY000Message: %s: Got signal %d. Aborting!
Error number:
1079; Symbol:ER_SHUTDOWN_COMPLETE; SQLSTATE:HY000Message: %s: Shutdown complete
Error number:
1080; Symbol:ER_FORCING_CLOSE; SQLSTATE:08S01Message: %s: Forcing close of thread %ld user: '%s'
Error number:
1081; Symbol:ER_IPSOCK_ERROR; SQLSTATE:08S01Message: Can't create IP socket
Error number:
1082; Symbol:ER_NO_SUCH_INDEX; SQLSTATE:42S12Message: Table '%s' has no index like the one used in CREATE INDEX; recreate the table
Error number:
1083; Symbol:ER_WRONG_FIELD_TERMINATORS; SQLSTATE:42000Message: Field separator argument is not what is expected; check the manual
Error number:
1084; Symbol:ER_BLOBS_AND_NO_TERMINATED; SQLSTATE:42000Message: You can't use fixed rowlength with BLOBs; please use 'fields terminated by'
Error number:
1085; Symbol:ER_TEXTFILE_NOT_READABLE; SQLSTATE:HY000Message: The file '%s' must be in the database directory or be readable by all
Error number:
1086; Symbol:ER_FILE_EXISTS_ERROR; SQLSTATE:HY000Message: File '%s' already exists
Error number:
1087; Symbol:ER_LOAD_INFO; SQLSTATE:HY000Message: Records: %ld Deleted: %ld Skipped: %ld Warnings: %ld
Error number:
1088; Symbol:ER_ALTER_INFO; SQLSTATE:HY000Message: Records: %ld Duplicates: %ld
Error number:
1089; Symbol:ER_WRONG_SUB_KEY; SQLSTATE:HY000Message: Incorrect prefix key; the used key part isn't a string, the used length is longer than the key part, or the storage engine doesn't support unique prefix keys
Error number:
1090; Symbol:ER_CANT_REMOVE_ALL_FIELDS; SQLSTATE:42000Message: You can't delete all columns with ALTER TABLE; use DROP TABLE instead
Error number:
1091; Symbol:ER_CANT_DROP_FIELD_OR_KEY; SQLSTATE:42000Message: Can't DROP '%s'; check that column/key exists
Error number:
1092; Symbol:ER_INSERT_INFO; SQLSTATE:HY000Message: Records: %ld Duplicates: %ld Warnings: %ld
Error number:
1093; Symbol:ER_UPDATE_TABLE_USED; SQLSTATE:HY000Message: You can't specify target table '%s' for update in FROM clause
This error occurs for attempts to select from and modify the same table within a single statement. See Section 13.2.10.12, “Restrictions on Subqueries”.
Error number:
1094; Symbol:ER_NO_SUCH_THREAD; SQLSTATE:HY000Message: Unknown thread id: %lu
Error number:
1095; Symbol:ER_KILL_DENIED_ERROR; SQLSTATE:HY000Message: You are not owner of thread %lu
Error number:
1096; Symbol:ER_NO_TABLES_USED; SQLSTATE:HY000Message: No tables used
Error number:
1097; Symbol:ER_TOO_BIG_SET; SQLSTATE:HY000Message: Too many strings for column %s and SET
Error number:
1098; Symbol:ER_NO_UNIQUE_LOGFILE; SQLSTATE:HY000Message: Can't generate a unique log-filename %s.(1-999)
Error number:
1099; Symbol:ER_TABLE_NOT_LOCKED_FOR_WRITE; SQLSTATE:HY000Message: Table '%s' was locked with a READ lock and can't be updated
Error number:
1100; Symbol:ER_TABLE_NOT_LOCKED; SQLSTATE:HY000Message: Table '%s' was not locked with LOCK TABLES
Error number:
1101; Symbol:ER_BLOB_CANT_HAVE_DEFAULT; SQLSTATE:42000Message: BLOB/TEXT column '%s' can't have a default value
Error number:
1102; Symbol:ER_WRONG_DB_NAME; SQLSTATE:42000Message: Incorrect database name '%s'
Error number:
1103; Symbol:ER_WRONG_TABLE_NAME; SQLSTATE:42000Message: Incorrect table name '%s'
Error number:
1104; Symbol:ER_TOO_BIG_SELECT; SQLSTATE:42000Message: The SELECT would examine more than MAX_JOIN_SIZE rows; check your WHERE and use SET SQL_BIG_SELECTS=1 or SET MAX_JOIN_SIZE=# if the SELECT is okay
Error number:
1105; Symbol:ER_UNKNOWN_ERROR; SQLSTATE:HY000Message: Unknown error
Error number:
1106; Symbol:ER_UNKNOWN_PROCEDURE; SQLSTATE:42000Message: Unknown procedure '%s'
Error number:
1107; Symbol:ER_WRONG_PARAMCOUNT_TO_PROCEDURE; SQLSTATE:42000Message: Incorrect parameter count to procedure '%s'
Error number:
1108; Symbol:ER_WRONG_PARAMETERS_TO_PROCEDURE; SQLSTATE:HY000Message: Incorrect parameters to procedure '%s'
Error number:
1109; Symbol:ER_UNKNOWN_TABLE; SQLSTATE:42S02Message: Unknown table '%s' in %s
Error number:
1110; Symbol:ER_FIELD_SPECIFIED_TWICE; SQLSTATE:42000Message: Column '%s' specified twice
Error number:
1111; Symbol:ER_INVALID_GROUP_FUNC_USE; SQLSTATE:HY000Message: Invalid use of group function
Error number:
1112; Symbol:ER_UNSUPPORTED_EXTENSION; SQLSTATE:42000Message: Table '%s' uses an extension that doesn't exist in this MySQL version
Error number:
1113; Symbol:ER_TABLE_MUST_HAVE_COLUMNS; SQLSTATE:42000Message: A table must have at least 1 column
Error number:
1114; Symbol:ER_RECORD_FILE_FULL; SQLSTATE:HY000Message: The table '%s' is full
InnoDBreports this error when the system tablespace runs out of free space. Reconfigure the system tablespace to add a new data file.Error number:
1115; Symbol:ER_UNKNOWN_CHARACTER_SET; SQLSTATE:42000Message: Unknown character set: '%s'
Error number:
1116; Symbol:ER_TOO_MANY_TABLES; SQLSTATE:HY000Message: Too many tables; MySQL can only use %d tables in a join
Error number:
1117; Symbol:ER_TOO_MANY_FIELDS; SQLSTATE:HY000Message: Too many columns
Error number:
1118; Symbol:ER_TOO_BIG_ROWSIZE; SQLSTATE:42000Message: Row size too large. The maximum row size for the used table type, not counting BLOBs, is %ld. This includes storage overhead, check the manual. You have to change some columns to TEXT or BLOBs
Error number:
1119; Symbol:ER_STACK_OVERRUN; SQLSTATE:HY000Message: Thread stack overrun: Used: %ld of a %ld stack. Use 'mysqld --thread_stack=#' to specify a bigger stack if needed
Error number:
1120; Symbol:ER_WRONG_OUTER_JOIN; SQLSTATE:42000Message: Cross dependency found in OUTER JOIN; examine your ON conditions
Error number:
1121; Symbol:ER_NULL_COLUMN_IN_INDEX; SQLSTATE:42000Message: Table handler doesn't support NULL in given index. Please change column '%s' to be NOT NULL or use another handler
Error number:
1122; Symbol:ER_CANT_FIND_UDF; SQLSTATE:HY000Message: Can't load function '%s'
Error number:
1123; Symbol:ER_CANT_INITIALIZE_UDF; SQLSTATE:HY000Message: Can't initialize function '%s'; %s
Error number:
1124; Symbol:ER_UDF_NO_PATHS; SQLSTATE:HY000Message: No paths allowed for shared library
Error number:
1125; Symbol:ER_UDF_EXISTS; SQLSTATE:HY000Message: Function '%s' already exists
Error number:
1126; Symbol:ER_CANT_OPEN_LIBRARY; SQLSTATE:HY000Message: Can't open shared library '%s' (errno: %d %s)
Error number:
1127; Symbol:ER_CANT_FIND_DL_ENTRY; SQLSTATE:HY000Message: Can't find symbol '%s' in library
Error number:
1128; Symbol:ER_FUNCTION_NOT_DEFINED; SQLSTATE:HY000Message: Function '%s' is not defined
Error number:
1129; Symbol:ER_HOST_IS_BLOCKED; SQLSTATE:HY000Message: Host '%s' is blocked because of many connection errors; unblock with 'mysqladmin flush-hosts'
Error number:
1130; Symbol:ER_HOST_NOT_PRIVILEGED; SQLSTATE:HY000Message: Host '%s' is not allowed to connect to this MySQL server
Error number:
1131; Symbol:ER_PASSWORD_ANONYMOUS_USER; SQLSTATE:42000Message: You are using MySQL as an anonymous user and anonymous users are not allowed to change passwords
Error number:
1132; Symbol:ER_PASSWORD_NOT_ALLOWED; SQLSTATE:42000Message: You must have privileges to update tables in the mysql database to be able to change passwords for others
Error number:
1133; Symbol:ER_PASSWORD_NO_MATCH; SQLSTATE:42000Message: Can't find any matching row in the user table
Error number:
1134; Symbol:ER_UPDATE_INFO; SQLSTATE:HY000Message: Rows matched: %ld Changed: %ld Warnings: %ld
Error number:
1135; Symbol:ER_CANT_CREATE_THREAD; SQLSTATE:HY000Message: Can't create a new thread (errno %d); if you are not out of available memory, you can consult the manual for a possible OS-dependent bug
Error number:
1136; Symbol:ER_WRONG_VALUE_COUNT_ON_ROW; SQLSTATE:21S01Message: Column count doesn't match value count at row %ld
Error number:
1137; Symbol:ER_CANT_REOPEN_TABLE; SQLSTATE:HY000Message: Can't reopen table: '%s'
Error number:
1138; Symbol:ER_INVALID_USE_OF_NULL; SQLSTATE:22004Message: Invalid use of NULL value
Error number:
1139; Symbol:ER_REGEXP_ERROR; SQLSTATE:42000Message: Got error '%s' from regexp
Error number:
1140; Symbol:ER_MIX_OF_GROUP_FUNC_AND_FIELDS; SQLSTATE:42000Message: Mixing of GROUP columns (MIN(),MAX(),COUNT(),...) with no GROUP columns is illegal if there is no GROUP BY clause
Error number:
1141; Symbol:ER_NONEXISTING_GRANT; SQLSTATE:42000Message: There is no such grant defined for user '%s' on host '%s'
Error number:
1142; Symbol:ER_TABLEACCESS_DENIED_ERROR; SQLSTATE:42000Message: %s command denied to user '%s'@'%s' for table '%s'
Error number:
1143; Symbol:ER_COLUMNACCESS_DENIED_ERROR; SQLSTATE:42000Message: %s command denied to user '%s'@'%s' for column '%s' in table '%s'
Error number:
1144; Symbol:ER_ILLEGAL_GRANT_FOR_TABLE; SQLSTATE:42000Message: Illegal GRANT/REVOKE command; please consult the manual to see which privileges can be used
Error number:
1145; Symbol:ER_GRANT_WRONG_HOST_OR_USER; SQLSTATE:42000Message: The host or user argument to GRANT is too long
Error number:
1146; Symbol:ER_NO_SUCH_TABLE; SQLSTATE:42S02Message: Table '%s.%s' doesn't exist
Error number:
1147; Symbol:ER_NONEXISTING_TABLE_GRANT; SQLSTATE:42000Message: There is no such grant defined for user '%s' on host '%s' on table '%s'
Error number:
1148; Symbol:ER_NOT_ALLOWED_COMMAND; SQLSTATE:42000Message: The used command is not allowed with this MySQL version
Error number:
1149; Symbol:ER_SYNTAX_ERROR; SQLSTATE:42000Message: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use
Error number:
1150; Symbol:ER_DELAYED_CANT_CHANGE_LOCK; SQLSTATE:HY000Message: Delayed insert thread couldn't get requested lock for table %s
Error number:
1151; Symbol:ER_TOO_MANY_DELAYED_THREADS; SQLSTATE:HY000Message: Too many delayed threads in use
Error number:
1152; Symbol:ER_ABORTING_CONNECTION; SQLSTATE:08S01Message: Aborted connection %ld to db: '%s' user: '%s' (%s)
Error number:
1153; Symbol:ER_NET_PACKET_TOO_LARGE; SQLSTATE:08S01Message: Got a packet bigger than 'max_allowed_packet' bytes
Error number:
1154; Symbol:ER_NET_READ_ERROR_FROM_PIPE; SQLSTATE:08S01Message: Got a read error from the connection pipe
Error number:
1155; Symbol:ER_NET_FCNTL_ERROR; SQLSTATE:08S01Message: Got an error from fcntl()
Error number:
1156; Symbol:ER_NET_PACKETS_OUT_OF_ORDER; SQLSTATE:08S01Message: Got packets out of order
Error number:
1157; Symbol:ER_NET_UNCOMPRESS_ERROR; SQLSTATE:08S01Message: Couldn't uncompress communication packet
Error number:
1158; Symbol:ER_NET_READ_ERROR; SQLSTATE:08S01Message: Got an error reading communication packets
Error number:
1159; Symbol:ER_NET_READ_INTERRUPTED; SQLSTATE:08S01Message: Got timeout reading communication packets
Error number:
1160; Symbol:ER_NET_ERROR_ON_WRITE; SQLSTATE:08S01Message: Got an error writing communication packets
Error number:
1161; Symbol:ER_NET_WRITE_INTERRUPTED; SQLSTATE:08S01Message: Got timeout writing communication packets
Error number:
1162; Symbol:ER_TOO_LONG_STRING; SQLSTATE:42000Message: Result string is longer than 'max_allowed_packet' bytes
Error number:
1163; Symbol:ER_TABLE_CANT_HANDLE_BLOB; SQLSTATE:42000Message: The used table type doesn't support BLOB/TEXT columns
Error number:
1164; Symbol:ER_TABLE_CANT_HANDLE_AUTO_INCREMENT; SQLSTATE:42000Message: The used table type doesn't support AUTO_INCREMENT columns
Error number:
1165; Symbol:ER_DELAYED_INSERT_TABLE_LOCKED; SQLSTATE:HY000Message: INSERT DELAYED can't be used with table '%s' because it is locked with LOCK TABLES
Error number:
1166; Symbol:ER_WRONG_COLUMN_NAME; SQLSTATE:42000Message: Incorrect column name '%s'
Error number:
1167; Symbol:ER_WRONG_KEY_COLUMN; SQLSTATE:42000Message: The used storage engine can't index column '%s'
Error number:
1168; Symbol:ER_WRONG_MRG_TABLE; SQLSTATE:HY000Message: Unable to open underlying table which is differently defined or of non-MyISAM type or doesn't exist
Error number:
1169; Symbol:ER_DUP_UNIQUE; SQLSTATE:23000Message: Can't write, because of unique constraint, to table '%s'
Error number:
1170; Symbol:ER_BLOB_KEY_WITHOUT_LENGTH; SQLSTATE:42000Message: BLOB/TEXT column '%s' used in key specification without a key length
Error number:
1171; Symbol:ER_PRIMARY_CANT_HAVE_NULL; SQLSTATE:42000Message: All parts of a PRIMARY KEY must be NOT NULL; if you need NULL in a key, use UNIQUE instead
Error number:
1172; Symbol:ER_TOO_MANY_ROWS; SQLSTATE:42000Message: Result consisted of more than one row
Error number:
1173; Symbol:ER_REQUIRES_PRIMARY_KEY; SQLSTATE:42000Message: This table type requires a primary key
Error number:
1174; Symbol:ER_NO_RAID_COMPILED; SQLSTATE:HY000Message: This version of MySQL is not compiled with RAID support
Error number:
1175; Symbol:ER_UPDATE_WITHOUT_KEY_IN_SAFE_MODE; SQLSTATE:HY000Message: You are using safe update mode and you tried to update a table without a WHERE that uses a KEY column
Error number:
1176; Symbol:ER_KEY_DOES_NOT_EXITS; SQLSTATE:42000Message: Key '%s' doesn't exist in table '%s'
Error number:
1177; Symbol:ER_CHECK_NO_SUCH_TABLE; SQLSTATE:42000Message: Can't open table
Error number:
1178; Symbol:ER_CHECK_NOT_IMPLEMENTED; SQLSTATE:42000Message: The storage engine for the table doesn't support %s
Error number:
1179; Symbol:ER_CANT_DO_THIS_DURING_AN_TRANSACTION; SQLSTATE:25000Message: You are not allowed to execute this command in a transaction
Error number:
1180; Symbol:ER_ERROR_DURING_COMMIT; SQLSTATE:HY000Message: Got error %d during COMMIT
Error number:
1181; Symbol:ER_ERROR_DURING_ROLLBACK; SQLSTATE:HY000Message: Got error %d during ROLLBACK
Error number:
1182; Symbol:ER_ERROR_DURING_FLUSH_LOGS; SQLSTATE:HY000Message: Got error %d during FLUSH_LOGS
Error number:
1183; Symbol:ER_ERROR_DURING_CHECKPOINT; SQLSTATE:HY000Message: Got error %d during CHECKPOINT
Error number:
1184; Symbol:ER_NEW_ABORTING_CONNECTION; SQLSTATE:08S01Message: Aborted connection %ld to db: '%s' user: '%s' host: '%s' (%s)
Error number:
1185; Symbol:ER_DUMP_NOT_IMPLEMENTED; SQLSTATE:HY000Message: The storage engine for the table does not support binary table dump
Error number:
1186; Symbol:ER_FLUSH_MASTER_BINLOG_CLOSED; SQLSTATE:HY000Message: Binlog closed, cannot RESET MASTER
Error number:
1187; Symbol:ER_INDEX_REBUILD; SQLSTATE:HY000Message: Failed rebuilding the index of dumped table '%s'
Error number:
1188; Symbol:ER_MASTER; SQLSTATE:HY000Message: Error from master: '%s'
Error number:
1189; Symbol:ER_MASTER_NET_READ; SQLSTATE:08S01Message: Net error reading from master
Error number:
1190; Symbol:ER_MASTER_NET_WRITE; SQLSTATE:08S01Message: Net error writing to master
Error number:
1191; Symbol:ER_FT_MATCHING_KEY_NOT_FOUND; SQLSTATE:HY000Message: Can't find FULLTEXT index matching the column list
Error number:
1192; Symbol:ER_LOCK_OR_ACTIVE_TRANSACTION; SQLSTATE:HY000Message: Can't execute the given command because you have active locked tables or an active transaction
Error number:
1193; Symbol:ER_UNKNOWN_SYSTEM_VARIABLE; SQLSTATE:HY000Message: Unknown system variable '%s'
Error number:
1194; Symbol:ER_CRASHED_ON_USAGE; SQLSTATE:HY000Message: Table '%s' is marked as crashed and should be repaired
Error number:
1195; Symbol:ER_CRASHED_ON_REPAIR; SQLSTATE:HY000Message: Table '%s' is marked as crashed and last (automatic?) repair failed
Error number:
1196; Symbol:ER_WARNING_NOT_COMPLETE_ROLLBACK; SQLSTATE:HY000Message: Some non-transactional changed tables couldn't be rolled back
Error number:
1197; Symbol:ER_TRANS_CACHE_FULL; SQLSTATE:HY000Message: Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage; increase this mysqld variable and try again
Error number:
1198; Symbol:ER_SLAVE_MUST_STOP; SQLSTATE:HY000Message: This operation cannot be performed with a running slave; run STOP SLAVE first
Error number:
1199; Symbol:ER_SLAVE_NOT_RUNNING; SQLSTATE:HY000Message: This operation requires a running slave; configure slave and do START SLAVE
Error number:
1200; Symbol:ER_BAD_SLAVE; SQLSTATE:HY000Message: The server is not configured as slave; fix in config file or with CHANGE MASTER TO
Error number:
1201; Symbol:ER_MASTER_INFO; SQLSTATE:HY000Message: Could not initialize master info structure; more error messages can be found in the MySQL error log
Error number:
1202; Symbol:ER_SLAVE_THREAD; SQLSTATE:HY000Message: Could not create slave thread; check system resources
Error number:
1203; Symbol:ER_TOO_MANY_USER_CONNECTIONS; SQLSTATE:42000Message: User %s already has more than 'max_user_connections' active connections
Error number:
1204; Symbol:ER_SET_CONSTANTS_ONLY; SQLSTATE:HY000Message: You may only use constant expressions with SET
Error number:
1205; Symbol:ER_LOCK_WAIT_TIMEOUT; SQLSTATE:HY000Message: Lock wait timeout exceeded; try restarting transaction
InnoDBreports this error when lock wait timeout expires. The statement that waited too long was rolled back (not the entire transaction). You can increase the value of theinnodb_lock_wait_timeoutconfiguration option if SQL statements should wait longer for other transactions to complete, or decrease it if too many long-running transactions are causing locking problems and reducing concurrency on a busy system.Error number:
1206; Symbol:ER_LOCK_TABLE_FULL; SQLSTATE:HY000Message: The total number of locks exceeds the lock table size
InnoDBreports this error when the total number of locks exceeds the amount of memory devoted to managing locks. To avoid this error, increase the value ofinnodb_buffer_pool_size. Within an individual application, a workaround may be to break a large operation into smaller pieces. For example, if the error occurs for a largeINSERT, perform several smallerINSERToperations.Error number:
1207; Symbol:ER_READ_ONLY_TRANSACTION; SQLSTATE:25000Message: Update locks cannot be acquired during a READ UNCOMMITTED transaction
Error number:
1208; Symbol:ER_DROP_DB_WITH_READ_LOCK; SQLSTATE:HY000Message: DROP DATABASE not allowed while thread is holding global read lock
Error number:
1209; Symbol:ER_CREATE_DB_WITH_READ_LOCK; SQLSTATE:HY000Message: CREATE DATABASE not allowed while thread is holding global read lock
Error number:
1210; Symbol:ER_WRONG_ARGUMENTS; SQLSTATE:HY000Message: Incorrect arguments to %s
Error number:
1211; Symbol:ER_NO_PERMISSION_TO_CREATE_USER; SQLSTATE:42000Message: '%s'@'%s' is not allowed to create new users
Error number:
1212; Symbol:ER_UNION_TABLES_IN_DIFFERENT_DIR; SQLSTATE:HY000Message: Incorrect table definition; all MERGE tables must be in the same database
Error number:
1213; Symbol:ER_LOCK_DEADLOCK; SQLSTATE:40001Message: Deadlock found when trying to get lock; try restarting transaction
InnoDBreports this error when a transaction encounters a deadlock and is automatically rolled back so that your application can take corrective action. To recover from this error, run all the operations in this transaction again. A deadlock occurs when requests for locks arrive in inconsistent order between transactions. The transaction that was rolled back released all its locks, and the other transaction can now get all the locks it requested. Thus, when you re-run the transaction that was rolled back, it might have to wait for other transactions to complete, but typically the deadlock does not recur. If you encounter frequent deadlocks, make the sequence of locking operations (LOCK TABLES,SELECT ... FOR UPDATE, and so on) consistent between the different transactions or applications that experience the issue. See Section 14.7.5, “Deadlocks in InnoDB” for details.Error number:
1214; Symbol:ER_TABLE_CANT_HANDLE_FT; SQLSTATE:HY000Message: The used table type doesn't support FULLTEXT indexes
Error number:
1215; Symbol:ER_CANNOT_ADD_FOREIGN; SQLSTATE:HY000Message: Cannot add foreign key constraint
Error number:
1216; Symbol:ER_NO_REFERENCED_ROW; SQLSTATE:23000Message: Cannot add or update a child row: a foreign key constraint fails
InnoDBreports this error when you try to add a row but there is no parent row, and a foreign key constraint fails. Add the parent row first.Error number:
1217; Symbol:ER_ROW_IS_REFERENCED; SQLSTATE:23000Message: Cannot delete or update a parent row: a foreign key constraint fails
InnoDBreports this error when you try to delete a parent row that has children, and a foreign key constraint fails. Delete the children first.Error number:
1218; Symbol:ER_CONNECT_TO_MASTER; SQLSTATE:08S01Message: Error connecting to master: %s
Error number:
1219; Symbol:ER_QUERY_ON_MASTER; SQLSTATE:HY000Message: Error running query on master: %s
Error number:
1220; Symbol:ER_ERROR_WHEN_EXECUTING_COMMAND; SQLSTATE:HY000Message: Error when executing command %s: %s
Error number:
1221; Symbol:ER_WRONG_USAGE; SQLSTATE:HY000Message: Incorrect usage of %s and %s
Error number:
1222; Symbol:ER_WRONG_NUMBER_OF_COLUMNS_IN_SELECT; SQLSTATE:21000Message: The used SELECT statements have a different number of columns
Error number:
1223; Symbol:ER_CANT_UPDATE_WITH_READLOCK; SQLSTATE:HY000Message: Can't execute the query because you have a conflicting read lock
Error number:
1224; Symbol:ER_MIXING_NOT_ALLOWED; SQLSTATE:HY000Message: Mixing of transactional and non-transactional tables is disabled
Error number:
1225; Symbol:ER_DUP_ARGUMENT; SQLSTATE:HY000Message: Option '%s' used twice in statement
Error number:
1226; Symbol:ER_USER_LIMIT_REACHED; SQLSTATE:42000Message: User '%s' has exceeded the '%s' resource (current value: %ld)
Error number:
1227; Symbol:ER_SPECIFIC_ACCESS_DENIED_ERROR; SQLSTATE:42000Message: Access denied; you need (at least one of) the %s privilege(s) for this operation
Error number:
1228; Symbol:ER_LOCAL_VARIABLE; SQLSTATE:HY000Message: Variable '%s' is a SESSION variable and can't be used with SET GLOBAL
Error number:
1229; Symbol:ER_GLOBAL_VARIABLE; SQLSTATE:HY000Message: Variable '%s' is a GLOBAL variable and should be set with SET GLOBAL
Error number:
1230; Symbol:ER_NO_DEFAULT; SQLSTATE:42000Message: Variable '%s' doesn't have a default value
Error number:
1231; Symbol:ER_WRONG_VALUE_FOR_VAR; SQLSTATE:42000Message: Variable '%s' can't be set to the value of '%s'
Error number:
1232; Symbol:ER_WRONG_TYPE_FOR_VAR; SQLSTATE:42000Message: Incorrect argument type to variable '%s'
Error number:
1233; Symbol:ER_VAR_CANT_BE_READ; SQLSTATE:HY000Message: Variable '%s' can only be set, not read
Error number:
1234; Symbol:ER_CANT_USE_OPTION_HERE; SQLSTATE:42000Message: Incorrect usage/placement of '%s'
Error number:
1235; Symbol:ER_NOT_SUPPORTED_YET; SQLSTATE:42000Message: This version of MySQL doesn't yet support '%s'
Error number:
1236; Symbol:ER_MASTER_FATAL_ERROR_READING_BINLOG; SQLSTATE:HY000Message: Got fatal error %d from master when reading data from binary log: '%s'
Error number:
1237; Symbol:ER_SLAVE_IGNORED_TABLE; SQLSTATE:HY000Message: Slave SQL thread ignored the query because of replicate-*-table rules
Error number:
1238; Symbol:ER_INCORRECT_GLOBAL_LOCAL_VAR; SQLSTATE:HY000Message: Variable '%s' is a %s variable
Error number:
1239; Symbol:ER_WRONG_FK_DEF; SQLSTATE:42000Message: Incorrect foreign key definition for '%s': %s
Error number:
1240; Symbol:ER_KEY_REF_DO_NOT_MATCH_TABLE_REF; SQLSTATE:HY000Message: Key reference and table reference don't match
Error number:
1241; Symbol:ER_OPERAND_COLUMNS; SQLSTATE:21000Message: Operand should contain %d column(s)
Error number:
1242; Symbol:ER_SUBQUERY_NO_1_ROW; SQLSTATE:21000Message: Subquery returns more than 1 row
Error number:
1243; Symbol:ER_UNKNOWN_STMT_HANDLER; SQLSTATE:HY000Message: Unknown prepared statement handler (%.*s) given to %s
Error number:
1244; Symbol:ER_CORRUPT_HELP_DB; SQLSTATE:HY000Message: Help database is corrupt or does not exist
Error number:
1245; Symbol:ER_CYCLIC_REFERENCE; SQLSTATE:HY000Message: Cyclic reference on subqueries
Error number:
1246; Symbol:ER_AUTO_CONVERT; SQLSTATE:HY000Message: Converting column '%s' from %s to %s
Error number:
1247; Symbol:ER_ILLEGAL_REFERENCE; SQLSTATE:42S22Message: Reference '%s' not supported (%s)
Error number:
1248; Symbol:ER_DERIVED_MUST_HAVE_ALIAS; SQLSTATE:42000Message: Every derived table must have its own alias
Error number:
1249; Symbol:ER_SELECT_REDUCED; SQLSTATE:01000Message: Select %u was reduced during optimization
Error number:
1250; Symbol:ER_TABLENAME_NOT_ALLOWED_HERE; SQLSTATE:42000Message: Table '%s' from one of the SELECTs cannot be used in %s
Error number:
1251; Symbol:ER_NOT_SUPPORTED_AUTH_MODE; SQLSTATE:08004Message: Client does not support authentication protocol requested by server; consider upgrading MySQL client
Error number:
1252; Symbol:ER_SPATIAL_CANT_HAVE_NULL; SQLSTATE:42000Message: All parts of a SPATIAL index must be NOT NULL
Error number:
1253; Symbol:ER_COLLATION_CHARSET_MISMATCH; SQLSTATE:42000Message: COLLATION '%s' is not valid for CHARACTER SET '%s'
Error number:
1254; Symbol:ER_SLAVE_WAS_RUNNING; SQLSTATE:HY000Message: Slave is already running
Error number:
1255; Symbol:ER_SLAVE_WAS_NOT_RUNNING; SQLSTATE:HY000Message: Slave already has been stopped
Error number:
1256; Symbol:ER_TOO_BIG_FOR_UNCOMPRESS; SQLSTATE:HY000Message: Uncompressed data size too large; the maximum size is %d (probably, length of uncompressed data was corrupted)
Error number:
1257; Symbol:ER_ZLIB_Z_MEM_ERROR; SQLSTATE:HY000Message: ZLIB: Not enough memory
Error number:
1258; Symbol:ER_ZLIB_Z_BUF_ERROR; SQLSTATE:HY000Message: ZLIB: Not enough room in the output buffer (probably, length of uncompressed data was corrupted)
Error number:
1259; Symbol:ER_ZLIB_Z_DATA_ERROR; SQLSTATE:HY000Message: ZLIB: Input data corrupted
Error number:
1260; Symbol:ER_CUT_VALUE_GROUP_CONCAT; SQLSTATE:HY000Message: Row %u was cut by GROUP_CONCAT()
Error number:
1261; Symbol:ER_WARN_TOO_FEW_RECORDS; SQLSTATE:01000Message: Row %ld doesn't contain data for all columns
Error number:
1262; Symbol:ER_WARN_TOO_MANY_RECORDS; SQLSTATE:01000Message: Row %ld was truncated; it contained more data than there were input columns
Error number:
1263; Symbol:ER_WARN_NULL_TO_NOTNULL; SQLSTATE:22004Message: Column set to default value; NULL supplied to NOT NULL column '%s' at row %ld
Error number:
1264; Symbol:ER_WARN_DATA_OUT_OF_RANGE; SQLSTATE:22003Message: Out of range value for column '%s' at row %ld
Error number:
1265; Symbol:WARN_DATA_TRUNCATED; SQLSTATE:01000Message: Data truncated for column '%s' at row %ld
Error number:
1266; Symbol:ER_WARN_USING_OTHER_HANDLER; SQLSTATE:HY000Message: Using storage engine %s for table '%s'
Error number:
1267; Symbol:ER_CANT_AGGREGATE_2COLLATIONS; SQLSTATE:HY000Message: Illegal mix of collations (%s,%s) and (%s,%s) for operation '%s'
Error number:
1268; Symbol:ER_DROP_USER; SQLSTATE:HY000Message: Cannot drop one or more of the requested users
Error number:
1269; Symbol:ER_REVOKE_GRANTS; SQLSTATE:HY000Message: Can't revoke all privileges for one or more of the requested users
Error number:
1270; Symbol:ER_CANT_AGGREGATE_3COLLATIONS; SQLSTATE:HY000Message: Illegal mix of collations (%s,%s), (%s,%s), (%s,%s) for operation '%s'
Error number:
1271; Symbol:ER_CANT_AGGREGATE_NCOLLATIONS; SQLSTATE:HY000Message: Illegal mix of collations for operation '%s'
Error number:
1272; Symbol:ER_VARIABLE_IS_NOT_STRUCT; SQLSTATE:HY000Message: Variable '%s' is not a variable component (can't be used as XXXX.variable_name)
Error number:
1273; Symbol:ER_UNKNOWN_COLLATION; SQLSTATE:HY000Message: Unknown collation: '%s'
Error number:
1274; Symbol:ER_SLAVE_IGNORED_SSL_PARAMS; SQLSTATE:HY000Message: SSL parameters in CHANGE MASTER are ignored because this MySQL slave was compiled without SSL support; they can be used later if MySQL slave with SSL is started
Error number:
1275; Symbol:ER_SERVER_IS_IN_SECURE_AUTH_MODE; SQLSTATE:HY000Message: Server is running in --secure-auth mode, but '%s'@'%s' has a password in the old format; please change the password to the new format
Error number:
1276; Symbol:ER_WARN_FIELD_RESOLVED; SQLSTATE:HY000Message: Field or reference '%s%s%s%s%s' of SELECT #%d was resolved in SELECT #%d
Error number:
1277; Symbol:ER_BAD_SLAVE_UNTIL_COND; SQLSTATE:HY000Message: Incorrect parameter or combination of parameters for START SLAVE UNTIL
Error number:
1278; Symbol:ER_MISSING_SKIP_SLAVE; SQLSTATE:HY000Message: It is recommended to use --skip-slave-start when doing step-by-step replication with START SLAVE UNTIL; otherwise, you will get problems if you get an unexpected slave's mysqld restart
Error number:
1279; Symbol:ER_UNTIL_COND_IGNORED; SQLSTATE:HY000Message: SQL thread is not to be started so UNTIL options are ignored
Error number:
1280; Symbol:ER_WRONG_NAME_FOR_INDEX; SQLSTATE:42000Message: Incorrect index name '%s'
Error number:
1281; Symbol:ER_WRONG_NAME_FOR_CATALOG; SQLSTATE:42000Message: Incorrect catalog name '%s'
Error number:
1282; Symbol:ER_WARN_QC_RESIZE; SQLSTATE:HY000Message: Query cache failed to set size %lu; new query cache size is %lu
Error number:
1283; Symbol:ER_BAD_FT_COLUMN; SQLSTATE:HY000Message: Column '%s' cannot be part of FULLTEXT index
Error number:
1284; Symbol:ER_UNKNOWN_KEY_CACHE; SQLSTATE:HY000Message: Unknown key cache '%s'
Error number:
1285; Symbol:ER_WARN_HOSTNAME_WONT_WORK; SQLSTATE:HY000Message: MySQL is started in --skip-name-resolve mode; you must restart it without this switch for this grant to work
Error number:
1286; Symbol:ER_UNKNOWN_STORAGE_ENGINE; SQLSTATE:42000Message: Unknown storage engine '%s'
Error number:
1287; Symbol:ER_WARN_DEPRECATED_SYNTAX; SQLSTATE:HY000Message: '%s' is deprecated and will be removed in a future release. Please use %s instead
Error number:
1288; Symbol:ER_NON_UPDATABLE_TABLE; SQLSTATE:HY000Message: The target table %s of the %s is not updatable
Error number:
1289; Symbol:ER_FEATURE_DISABLED; SQLSTATE:HY000Message: The '%s' feature is disabled; you need MySQL built with '%s' to have it working
Error number:
1290; Symbol:ER_OPTION_PREVENTS_STATEMENT; SQLSTATE:HY000Message: The MySQL server is running with the %s option so it cannot execute this statement
Error number:
1291; Symbol:ER_DUPLICATED_VALUE_IN_TYPE; SQLSTATE:HY000Message: Column '%s' has duplicated value '%s' in %s
Error number:
1292; Symbol:ER_TRUNCATED_WRONG_VALUE; SQLSTATE:22007Message: Truncated incorrect %s value: '%s'
Error number:
1293; Symbol:ER_TOO_MUCH_AUTO_TIMESTAMP_COLS; SQLSTATE:HY000Message: Incorrect table definition; there can be only one TIMESTAMP column with CURRENT_TIMESTAMP in DEFAULT or ON UPDATE clause
Error number:
1294; Symbol:ER_INVALID_ON_UPDATE; SQLSTATE:HY000Message: Invalid ON UPDATE clause for '%s' column
Error number:
1295; Symbol:ER_UNSUPPORTED_PS; SQLSTATE:HY000Message: This command is not supported in the prepared statement protocol yet
Error number:
1296; Symbol:ER_GET_ERRMSG; SQLSTATE:HY000Message: Got error %d '%s' from %s
Error number:
1297; Symbol:ER_GET_TEMPORARY_ERRMSG; SQLSTATE:HY000Message: Got temporary error %d '%s' from %s
Error number:
1298; Symbol:ER_UNKNOWN_TIME_ZONE; SQLSTATE:HY000Message: Unknown or incorrect time zone: '%s'
Error number:
1299; Symbol:ER_WARN_INVALID_TIMESTAMP; SQLSTATE:HY000Message: Invalid TIMESTAMP value in column '%s' at row %ld
Error number:
1300; Symbol:ER_INVALID_CHARACTER_STRING; SQLSTATE:HY000Message: Invalid %s character string: '%s'
Error number:
1301; Symbol:ER_WARN_ALLOWED_PACKET_OVERFLOWED; SQLSTATE:HY000Message: Result of %s() was larger than max_allowed_packet (%ld) - truncated
Error number:
1302; Symbol:ER_CONFLICTING_DECLARATIONS; SQLSTATE:HY000Message: Conflicting declarations: '%s%s' and '%s%s'
Error number:
1303; Symbol:ER_SP_NO_RECURSIVE_CREATE; SQLSTATE:2F003Message: Can't create a %s from within another stored routine
Error number:
1304; Symbol:ER_SP_ALREADY_EXISTS; SQLSTATE:42000Message: %s %s already exists
Error number:
1305; Symbol:ER_SP_DOES_NOT_EXIST; SQLSTATE:42000Message: %s %s does not exist
Error number:
1306; Symbol:ER_SP_DROP_FAILED; SQLSTATE:HY000Message: Failed to DROP %s %s
Error number:
1307; Symbol:ER_SP_STORE_FAILED; SQLSTATE:HY000Message: Failed to CREATE %s %s
Error number:
1308; Symbol:ER_SP_LILABEL_MISMATCH; SQLSTATE:42000Message: %s with no matching label: %s
Error number:
1309; Symbol:ER_SP_LABEL_REDEFINE; SQLSTATE:42000Message: Redefining label %s
Error number:
1310; Symbol:ER_SP_LABEL_MISMATCH; SQLSTATE:42000Message: End-label %s without match
Error number:
1311; Symbol:ER_SP_UNINIT_VAR; SQLSTATE:01000Message: Referring to uninitialized variable %s
Error number:
1312; Symbol:ER_SP_BADSELECT; SQLSTATE:0A000Message: PROCEDURE %s can't return a result set in the given context
Error number:
1313; Symbol:ER_SP_BADRETURN; SQLSTATE:42000Message: RETURN is only allowed in a FUNCTION
Error number:
1314; Symbol:ER_SP_BADSTATEMENT; SQLSTATE:0A000Message: %s is not allowed in stored procedures
Error number:
1315; Symbol:ER_UPDATE_LOG_DEPRECATED_IGNORED; SQLSTATE:42000Message: The update log is deprecated and replaced by the binary log; SET SQL_LOG_UPDATE has been ignored.
Error number:
1316; Symbol:ER_UPDATE_LOG_DEPRECATED_TRANSLATED; SQLSTATE:42000Message: The update log is deprecated and replaced by the binary log; SET SQL_LOG_UPDATE has been translated to SET SQL_LOG_BIN.
Error number:
1317; Symbol:ER_QUERY_INTERRUPTED; SQLSTATE:70100Message: Query execution was interrupted
Error number:
1318; Symbol:ER_SP_WRONG_NO_OF_ARGS; SQLSTATE:42000Message: Incorrect number of arguments for %s %s; expected %u, got %u
Error number:
1319; Symbol:ER_SP_COND_MISMATCH; SQLSTATE:42000Message: Undefined CONDITION: %s
Error number:
1320; Symbol:ER_SP_NORETURN; SQLSTATE:42000Message: No RETURN found in FUNCTION %s
Error number:
1321; Symbol:ER_SP_NORETURNEND; SQLSTATE:2F005Message: FUNCTION %s ended without RETURN
Error number:
1322; Symbol:ER_SP_BAD_CURSOR_QUERY; SQLSTATE:42000Message: Cursor statement must be a SELECT
Error number:
1323; Symbol:ER_SP_BAD_CURSOR_SELECT; SQLSTATE:42000Message: Cursor SELECT must not have INTO
Error number:
1324; Symbol:ER_SP_CURSOR_MISMATCH; SQLSTATE:42000Message: Undefined CURSOR: %s
Error number:
1325; Symbol:ER_SP_CURSOR_ALREADY_OPEN; SQLSTATE:24000Message: Cursor is already open
Error number:
1326; Symbol:ER_SP_CURSOR_NOT_OPEN; SQLSTATE:24000Message: Cursor is not open
Error number:
1327; Symbol:ER_SP_UNDECLARED_VAR; SQLSTATE:42000Message: Undeclared variable: %s
Error number:
1328; Symbol:ER_SP_WRONG_NO_OF_FETCH_ARGS; SQLSTATE:HY000Message: Incorrect number of FETCH variables
Error number:
1329; Symbol:ER_SP_FETCH_NO_DATA; SQLSTATE:02000Message: No data - zero rows fetched, selected, or processed
Error number:
1330; Symbol:ER_SP_DUP_PARAM; SQLSTATE:42000Message: Duplicate parameter: %s
Error number:
1331; Symbol:ER_SP_DUP_VAR; SQLSTATE:42000Message: Duplicate variable: %s
Error number:
1332; Symbol:ER_SP_DUP_COND; SQLSTATE:42000Message: Duplicate condition: %s
Error number:
1333; Symbol:ER_SP_DUP_CURS; SQLSTATE:42000Message: Duplicate cursor: %s
Error number:
1334; Symbol:ER_SP_CANT_ALTER; SQLSTATE:HY000Message: Failed to ALTER %s %s
Error number:
1335; Symbol:ER_SP_SUBSELECT_NYI; SQLSTATE:0A000Message: Subquery value not supported
Error number:
1336; Symbol:ER_STMT_NOT_ALLOWED_IN_SF_OR_TRG; SQLSTATE:0A000Message: %s is not allowed in stored function or trigger
Error number:
1337; Symbol:ER_SP_VARCOND_AFTER_CURSHNDLR; SQLSTATE:42000Message: Variable or condition declaration after cursor or handler declaration
Error number:
1338; Symbol:ER_SP_CURSOR_AFTER_HANDLER; SQLSTATE:42000Message: Cursor declaration after handler declaration
Error number:
1339; Symbol:ER_SP_CASE_NOT_FOUND; SQLSTATE:20000Message: Case not found for CASE statement
Error number:
1340; Symbol:ER_FPARSER_TOO_BIG_FILE; SQLSTATE:HY000Message: Configuration file '%s' is too big
Error number:
1341; Symbol:ER_FPARSER_BAD_HEADER; SQLSTATE:HY000Message: Malformed file type header in file '%s'
Error number:
1342; Symbol:ER_FPARSER_EOF_IN_COMMENT; SQLSTATE:HY000Message: Unexpected end of file while parsing comment '%s'
Error number:
1343; Symbol:ER_FPARSER_ERROR_IN_PARAMETER; SQLSTATE:HY000Message: Error while parsing parameter '%s' (line: '%s')
Error number:
1344; Symbol:ER_FPARSER_EOF_IN_UNKNOWN_PARAMETER; SQLSTATE:HY000Message: Unexpected end of file while skipping unknown parameter '%s'
Error number:
1345; Symbol:ER_VIEW_NO_EXPLAIN; SQLSTATE:HY000Message: EXPLAIN/SHOW can not be issued; lacking privileges for underlying table
Error number:
1346; Symbol:ER_FRM_UNKNOWN_TYPE; SQLSTATE:HY000Message: File '%s' has unknown type '%s' in its header
Error number:
1347; Symbol:ER_WRONG_OBJECT; SQLSTATE:HY000Message: '%s.%s' is not %s
The named object is incorrect for the type of operation attempted on it. It must be an object of the named type.
Error number:
1348; Symbol:ER_NONUPDATEABLE_COLUMN; SQLSTATE:HY000Message: Column '%s' is not updatable
Error number:
1349; Symbol:ER_VIEW_SELECT_DERIVED; SQLSTATE:HY000Message: View's SELECT contains a subquery in the FROM clause
Error number:
1350; Symbol:ER_VIEW_SELECT_CLAUSE; SQLSTATE:HY000Message: View's SELECT contains a '%s' clause
Error number:
1351; Symbol:ER_VIEW_SELECT_VARIABLE; SQLSTATE:HY000Message: View's SELECT contains a variable or parameter
Error number:
1352; Symbol:ER_VIEW_SELECT_TMPTABLE; SQLSTATE:HY000Message: View's SELECT refers to a temporary table '%s'
Error number:
1353; Symbol:ER_VIEW_WRONG_LIST; SQLSTATE:HY000Message: View's SELECT and view's field list have different column counts
Error number:
1354; Symbol:ER_WARN_VIEW_MERGE; SQLSTATE:HY000Message: View merge algorithm can't be used here for now (assumed undefined algorithm)
Error number:
1355; Symbol:ER_WARN_VIEW_WITHOUT_KEY; SQLSTATE:HY000Message: View being updated does not have complete key of underlying table in it
Error number:
1356; Symbol:ER_VIEW_INVALID; SQLSTATE:HY000Message: View '%s.%s' references invalid table(s) or column(s) or function(s) or definer/invoker of view lack rights to use them
Error number:
1357; Symbol:ER_SP_NO_DROP_SP; SQLSTATE:HY000Message: Can't drop or alter a %s from within another stored routine
Error number:
1358; Symbol:ER_SP_GOTO_IN_HNDLR; SQLSTATE:HY000Message: GOTO is not allowed in a stored procedure handler
Error number:
1359; Symbol:ER_TRG_ALREADY_EXISTS; SQLSTATE:HY000Message: Trigger already exists
Error number:
1360; Symbol:ER_TRG_DOES_NOT_EXIST; SQLSTATE:HY000Message: Trigger does not exist
Error number:
1361; Symbol:ER_TRG_ON_VIEW_OR_TEMP_TABLE; SQLSTATE:HY000Message: Trigger's '%s' is view or temporary table
Error number:
1362; Symbol:ER_TRG_CANT_CHANGE_ROW; SQLSTATE:HY000Message: Updating of %s row is not allowed in %strigger
Error number:
1363; Symbol:ER_TRG_NO_SUCH_ROW_IN_TRG; SQLSTATE:HY000Message: There is no %s row in %s trigger
Error number:
1364; Symbol:ER_NO_DEFAULT_FOR_FIELD; SQLSTATE:HY000Message: Field '%s' doesn't have a default value
Error number:
1365; Symbol:ER_DIVISION_BY_ZERO; SQLSTATE:22012Message: Division by 0
Error number:
1366; Symbol:ER_TRUNCATED_WRONG_VALUE_FOR_FIELD; SQLSTATE:HY000Message: Incorrect %s value: '%s' for column '%s' at row %ld
Error number:
1367; Symbol:ER_ILLEGAL_VALUE_FOR_TYPE; SQLSTATE:22007Message: Illegal %s '%s' value found during parsing
Error number:
1368; Symbol:ER_VIEW_NONUPD_CHECK; SQLSTATE:HY000Message: CHECK OPTION on non-updatable view '%s.%s'
Error number:
1369; Symbol:ER_VIEW_CHECK_FAILED; SQLSTATE:HY000Message: CHECK OPTION failed '%s.%s'
Error number:
1370; Symbol:ER_PROCACCESS_DENIED_ERROR; SQLSTATE:42000Message: %s command denied to user '%s'@'%s' for routine '%s'
Error number:
1371; Symbol:ER_RELAY_LOG_FAIL; SQLSTATE:HY000Message: Failed purging old relay logs: %s
Error number:
1372; Symbol:ER_PASSWD_LENGTH; SQLSTATE:HY000Message: Password hash should be a %d-digit hexadecimal number
Error number:
1373; Symbol:ER_UNKNOWN_TARGET_BINLOG; SQLSTATE:HY000Message: Target log not found in binlog index
Error number:
1374; Symbol:ER_IO_ERR_LOG_INDEX_READ; SQLSTATE:HY000Message: I/O error reading log index file
Error number:
1375; Symbol:ER_BINLOG_PURGE_PROHIBITED; SQLSTATE:HY000Message: Server configuration does not permit binlog purge
Error number:
1376; Symbol:ER_FSEEK_FAIL; SQLSTATE:HY000Message: Failed on fseek()
Error number:
1377; Symbol:ER_BINLOG_PURGE_FATAL_ERR; SQLSTATE:HY000Message: Fatal error during log purge
Error number:
1378; Symbol:ER_LOG_IN_USE; SQLSTATE:HY000Message: A purgeable log is in use, will not purge
Error number:
1379; Symbol:ER_LOG_PURGE_UNKNOWN_ERR; SQLSTATE:HY000Message: Unknown error during log purge
Error number:
1380; Symbol:ER_RELAY_LOG_INIT; SQLSTATE:HY000Message: Failed initializing relay log position: %s
Error number:
1381; Symbol:ER_NO_BINARY_LOGGING; SQLSTATE:HY000Message: You are not using binary logging
Error number:
1382; Symbol:ER_RESERVED_SYNTAX; SQLSTATE:HY000Message: The '%s' syntax is reserved for purposes internal to the MySQL server
Error number:
1383; Symbol:ER_WSAS_FAILED; SQLSTATE:HY000Message: WSAStartup Failed
Error number:
1384; Symbol:ER_DIFF_GROUPS_PROC; SQLSTATE:HY000Message: Can't handle procedures with different groups yet
Error number:
1385; Symbol:ER_NO_GROUP_FOR_PROC; SQLSTATE:HY000Message: Select must have a group with this procedure
Error number:
1386; Symbol:ER_ORDER_WITH_PROC; SQLSTATE:HY000Message: Can't use ORDER clause with this procedure
Error number:
1387; Symbol:ER_LOGGING_PROHIBIT_CHANGING_OF; SQLSTATE:HY000Message: Binary logging and replication forbid changing the global server %s
Error number:
1388; Symbol:ER_NO_FILE_MAPPING; SQLSTATE:HY000Message: Can't map file: %s, errno: %d
Error number:
1389; Symbol:ER_WRONG_MAGIC; SQLSTATE:HY000Message: Wrong magic in %s
Error number:
1390; Symbol:ER_PS_MANY_PARAM; SQLSTATE:HY000Message: Prepared statement contains too many placeholders
Error number:
1391; Symbol:ER_KEY_PART_0; SQLSTATE:HY000Message: Key part '%s' length cannot be 0
Error number:
1392; Symbol:ER_VIEW_CHECKSUM; SQLSTATE:HY000Message: View text checksum failed
Error number:
1393; Symbol:ER_VIEW_MULTIUPDATE; SQLSTATE:HY000Message: Can not modify more than one base table through a join view '%s.%s'
Error number:
1394; Symbol:ER_VIEW_NO_INSERT_FIELD_LIST; SQLSTATE:HY000Message: Can not insert into join view '%s.%s' without fields list
Error number:
1395; Symbol:ER_VIEW_DELETE_MERGE_VIEW; SQLSTATE:HY000Message: Can not delete from join view '%s.%s'
Error number:
1396; Symbol:ER_CANNOT_USER; SQLSTATE:HY000Message: Operation %s failed for %s
Error number:
1397; Symbol:ER_XAER_NOTA; SQLSTATE:XAE04Message: XAER_NOTA: Unknown XID
Error number:
1398; Symbol:ER_XAER_INVAL; SQLSTATE:XAE05Message: XAER_INVAL: Invalid arguments (or unsupported command)
Error number:
1399; Symbol:ER_XAER_RMFAIL; SQLSTATE:XAE07Message: XAER_RMFAIL: The command cannot be executed when global transaction is in the %s state
Error number:
1400; Symbol:ER_XAER_OUTSIDE; SQLSTATE:XAE09Message: XAER_OUTSIDE: Some work is done outside global transaction
Error number:
1401; Symbol:ER_XAER_RMERR; SQLSTATE:XAE03Message: XAER_RMERR: Fatal error occurred in the transaction branch - check your data for consistency
Error number:
1402; Symbol:ER_XA_RBROLLBACK; SQLSTATE:XA100Message: XA_RBROLLBACK: Transaction branch was rolled back
Error number:
1403; Symbol:ER_NONEXISTING_PROC_GRANT; SQLSTATE:42000Message: There is no such grant defined for user '%s' on host '%s' on routine '%s'
Error number:
1404; Symbol:ER_PROC_AUTO_GRANT_FAIL; SQLSTATE:HY000Message: Failed to grant EXECUTE and ALTER ROUTINE privileges
Error number:
1405; Symbol:ER_PROC_AUTO_REVOKE_FAIL; SQLSTATE:HY000Message: Failed to revoke all privileges to dropped routine
Error number:
1406; Symbol:ER_DATA_TOO_LONG; SQLSTATE:22001Message: Data too long for column '%s' at row %ld
Error number:
1407; Symbol:ER_SP_BAD_SQLSTATE; SQLSTATE:42000Message: Bad SQLSTATE: '%s'
Error number:
1408; Symbol:ER_STARTUP; SQLSTATE:HY000Message: %s: ready for connections. Version: '%s' socket: '%s' port: %d %s
Error number:
1409; Symbol:ER_LOAD_FROM_FIXED_SIZE_ROWS_TO_VAR; SQLSTATE:HY000Message: Can't load value from file with fixed size rows to variable
Error number:
1410; Symbol:ER_CANT_CREATE_USER_WITH_GRANT; SQLSTATE:42000Message: You are not allowed to create a user with GRANT
Error number:
1411; Symbol:ER_WRONG_VALUE_FOR_TYPE; SQLSTATE:HY000Message: Incorrect %s value: '%s' for function %s
Error number:
1412; Symbol:ER_TABLE_DEF_CHANGED; SQLSTATE:HY000Message: Table definition has changed, please retry transaction
Error number:
1413; Symbol:ER_SP_DUP_HANDLER; SQLSTATE:42000Message: Duplicate handler declared in the same block
Error number:
1414; Symbol:ER_SP_NOT_VAR_ARG; SQLSTATE:42000Message: OUT or INOUT argument %d for routine %s is not a variable or NEW pseudo-variable in BEFORE trigger
Error number:
1415; Symbol:ER_SP_NO_RETSET; SQLSTATE:0A000Message: Not allowed to return a result set from a %s
Error number:
1416; Symbol:ER_CANT_CREATE_GEOMETRY_OBJECT; SQLSTATE:22003Message: Cannot get geometry object from data you send to the GEOMETRY field
Error number:
1417; Symbol:ER_FAILED_ROUTINE_BREAK_BINLOG; SQLSTATE:HY000Message: A routine failed and has neither NO SQL nor READS SQL DATA in its declaration and binary logging is enabled; if non-transactional tables were updated, the binary log will miss their changes
Error number:
1418; Symbol:ER_BINLOG_UNSAFE_ROUTINE; SQLSTATE:HY000Message: This function has none of DETERMINISTIC, NO SQL, or READS SQL DATA in its declaration and binary logging is enabled (you *might* want to use the less safe log_bin_trust_function_creators variable)
Error number:
1419; Symbol:ER_BINLOG_CREATE_ROUTINE_NEED_SUPER; SQLSTATE:HY000Message: You do not have the SUPER privilege and binary logging is enabled (you *might* want to use the less safe log_bin_trust_function_creators variable)
Error number:
1420; Symbol:ER_EXEC_STMT_WITH_OPEN_CURSOR; SQLSTATE:HY000Message: You can't execute a prepared statement which has an open cursor associated with it. Reset the statement to re-execute it.
Error number:
1421; Symbol:ER_STMT_HAS_NO_OPEN_CURSOR; SQLSTATE:HY000Message: The statement (%lu) has no open cursor.
Error number:
1422; Symbol:ER_COMMIT_NOT_ALLOWED_IN_SF_OR_TRG; SQLSTATE:HY000Message: Explicit or implicit commit is not allowed in stored function or trigger.
Error number:
1423; Symbol:ER_NO_DEFAULT_FOR_VIEW_FIELD; SQLSTATE:HY000Message: Field of view '%s.%s' underlying table doesn't have a default value
Error number:
1424; Symbol:ER_SP_NO_RECURSION; SQLSTATE:HY000Message: Recursive stored functions and triggers are not allowed.
Error number:
1425; Symbol:ER_TOO_BIG_SCALE; SQLSTATE:42000Message: Too big scale %d specified for column '%s'. Maximum is %lu.
Error number:
1426; Symbol:ER_TOO_BIG_PRECISION; SQLSTATE:42000Message: Too big precision %d specified for column '%s'. Maximum is %lu.
Error number:
1427; Symbol:ER_M_BIGGER_THAN_D; SQLSTATE:42000Message: For float(M,D), double(M,D) or decimal(M,D), M must be >= D (column '%s').
Error number:
1428; Symbol:ER_WRONG_LOCK_OF_SYSTEM_TABLE; SQLSTATE:HY000Message: You can't combine write-locking of system tables with other tables or lock types
Error number:
1429; Symbol:ER_CONNECT_TO_FOREIGN_DATA_SOURCE; SQLSTATE:HY000Message: Unable to connect to foreign data source: %s
Error number:
1430; Symbol:ER_QUERY_ON_FOREIGN_DATA_SOURCE; SQLSTATE:HY000Message: There was a problem processing the query on the foreign data source. Data source error: %s
Error number:
1431; Symbol:ER_FOREIGN_DATA_SOURCE_DOESNT_EXIST; SQLSTATE:HY000Message: The foreign data source you are trying to reference does not exist. Data source error: %s
Error number:
1432; Symbol:ER_FOREIGN_DATA_STRING_INVALID_CANT_CREATE; SQLSTATE:HY000Message: Can't create federated table. The data source connection string '%s' is not in the correct format
Error number:
1433; Symbol:ER_FOREIGN_DATA_STRING_INVALID; SQLSTATE:HY000Message: The data source connection string '%s' is not in the correct format
Error number:
1434; Symbol:ER_CANT_CREATE_FEDERATED_TABLE; SQLSTATE:HY000Message: Can't create federated table. Foreign data src error: %s
Error number:
1435; Symbol:ER_TRG_IN_WRONG_SCHEMA; SQLSTATE:HY000Message: Trigger in wrong schema
Error number:
1436; Symbol:ER_STACK_OVERRUN_NEED_MORE; SQLSTATE:HY000Message: Thread stack overrun: %ld bytes used of a %ld byte stack, and %ld bytes needed. Use 'mysqld --thread_stack=#' to specify a bigger stack.
Error number:
1437; Symbol:ER_TOO_LONG_BODY; SQLSTATE:42000Message: Routine body for '%s' is too long
Error number:
1438; Symbol:ER_WARN_CANT_DROP_DEFAULT_KEYCACHE; SQLSTATE:HY000Message: Cannot drop default keycache
Error number:
1439; Symbol:ER_TOO_BIG_DISPLAYWIDTH; SQLSTATE:42000Message: Display width out of range for column '%s' (max = %lu)
Error number:
1440; Symbol:ER_XAER_DUPID; SQLSTATE:XAE08Message: XAER_DUPID: The XID already exists
Error number:
1441; Symbol:ER_DATETIME_FUNCTION_OVERFLOW; SQLSTATE:22008Message: Datetime function: %s field overflow
Error number:
1442; Symbol:ER_CANT_UPDATE_USED_TABLE_IN_SF_OR_TRG; SQLSTATE:HY000Message: Can't update table '%s' in stored function/trigger because it is already used by statement which invoked this stored function/trigger.
Error number:
1443; Symbol:ER_VIEW_PREVENT_UPDATE; SQLSTATE:HY000Message: The definition of table '%s' prevents operation %s on table '%s'.
Error number:
1444; Symbol:ER_PS_NO_RECURSION; SQLSTATE:HY000Message: The prepared statement contains a stored routine call that refers to that same statement. It's not allowed to execute a prepared statement in such a recursive manner
Error number:
1445; Symbol:ER_SP_CANT_SET_AUTOCOMMIT; SQLSTATE:HY000Message: Not allowed to set autocommit from a stored function or trigger
Error number:
1446; Symbol:ER_MALFORMED_DEFINER; SQLSTATE:HY000Message: Definer is not fully qualified
Error number:
1447; Symbol:ER_VIEW_FRM_NO_USER; SQLSTATE:HY000Message: View '%s'.'%s' has no definer information (old table format). Current user is used as definer. Please recreate the view!
Error number:
1448; Symbol:ER_VIEW_OTHER_USER; SQLSTATE:HY000Message: You need the SUPER privilege for creation view with '%s'@'%s' definer
Error number:
1449; Symbol:ER_NO_SUCH_USER; SQLSTATE:HY000Message: The user specified as a definer ('%s'@'%s') does not exist
Error number:
1450; Symbol:ER_FORBID_SCHEMA_CHANGE; SQLSTATE:HY000Message: Changing schema from '%s' to '%s' is not allowed.
Error number:
1451; Symbol:ER_ROW_IS_REFERENCED_2; SQLSTATE:23000Message: Cannot delete or update a parent row: a foreign key constraint fails (%s)
InnoDBreports this error when you try to delete a parent row that has children, and a foreign key constraint fails. Delete the children first.Error number:
1452; Symbol:ER_NO_REFERENCED_ROW_2; SQLSTATE:23000Message: Cannot add or update a child row: a foreign key constraint fails (%s)
InnoDBreports this error when you try to add a row but there is no parent row, and a foreign key constraint fails. Add the parent row first.Error number:
1453; Symbol:ER_SP_BAD_VAR_SHADOW; SQLSTATE:42000Message: Variable '%s' must be quoted with `...`, or renamed
Error number:
1454; Symbol:ER_TRG_NO_DEFINER; SQLSTATE:HY000Message: No definer attribute for trigger '%s'.'%s'. The trigger will be activated under the authorization of the invoker, which may have insufficient privileges. Please recreate the trigger.
Error number:
1455; Symbol:ER_OLD_FILE_FORMAT; SQLSTATE:HY000Message: '%s' has an old format, you should re-create the '%s' object(s)
Error number:
1456; Symbol:ER_SP_RECURSION_LIMIT; SQLSTATE:HY000Message: Recursive limit %d (as set by the max_sp_recursion_depth variable) was exceeded for routine %s
Error number:
1457; Symbol:ER_SP_PROC_TABLE_CORRUPT; SQLSTATE:HY000Message: Failed to load routine %s. The table mysql.proc is missing, corrupt, or contains bad data (internal code %d)
Error number:
1458; Symbol:ER_SP_WRONG_NAME; SQLSTATE:42000Message: Incorrect routine name '%s'
Error number:
1459; Symbol:ER_TABLE_NEEDS_UPGRADE; SQLSTATE:HY000Message: Table upgrade required. Please do "REPAIR TABLE `%s`" or dump/reload to fix it!
Error number:
1460; Symbol:ER_SP_NO_AGGREGATE; SQLSTATE:42000Message: AGGREGATE is not supported for stored functions
Error number:
1461; Symbol:ER_MAX_PREPARED_STMT_COUNT_REACHED; SQLSTATE:42000Message: Can't create more than max_prepared_stmt_count statements (current value: %lu)
Error number:
1462; Symbol:ER_VIEW_RECURSIVE; SQLSTATE:HY000Message: `%s`.`%s` contains view recursion
Error number:
1463; Symbol:ER_NON_GROUPING_FIELD_USED; SQLSTATE:42000Message: Non-grouping field '%s' is used in %s clause
Error number:
1464; Symbol:ER_TABLE_CANT_HANDLE_SPKEYS; SQLSTATE:HY000Message: The used table type doesn't support SPATIAL indexes
Error number:
1465; Symbol:ER_NO_TRIGGERS_ON_SYSTEM_SCHEMA; SQLSTATE:HY000Message: Triggers can not be created on system tables
Error number:
1466; Symbol:ER_REMOVED_SPACES; SQLSTATE:HY000Message: Leading spaces are removed from name '%s'
Error number:
1467; Symbol:ER_AUTOINC_READ_FAILED; SQLSTATE:HY000Message: Failed to read auto-increment value from storage engine
Error number:
1468; Symbol:ER_USERNAME; SQLSTATE:HY000Message: user name
Error number:
1469; Symbol:ER_HOSTNAME; SQLSTATE:HY000Message: host name
Error number:
1470; Symbol:ER_WRONG_STRING_LENGTH; SQLSTATE:HY000Message: String '%s' is too long for %s (should be no longer than %d)
Error number:
1471; Symbol:ER_NON_INSERTABLE_TABLE; SQLSTATE:HY000Message: The target table %s of the %s is not insertable-into
Error number:
1472; Symbol:ER_ADMIN_WRONG_MRG_TABLE; SQLSTATE:HY000Message: Table '%s' is differently defined or of non-MyISAM type or doesn't exist
Error number:
1473; Symbol:ER_TOO_HIGH_LEVEL_OF_NESTING_FOR_SELECT; SQLSTATE:HY000Message: Too high level of nesting for select
Error number:
1474; Symbol:ER_NAME_BECOMES_EMPTY; SQLSTATE:HY000Message: Name '%s' has become ''
Error number:
1475; Symbol:ER_AMBIGUOUS_FIELD_TERM; SQLSTATE:HY000Message: First character of the FIELDS TERMINATED string is ambiguous; please use non-optional and non-empty FIELDS ENCLOSED BY
Error number:
1476; Symbol:ER_FOREIGN_SERVER_EXISTS; SQLSTATE:HY000Message: The foreign server, %s, you are trying to create already exists.
Error number:
1477; Symbol:ER_FOREIGN_SERVER_DOESNT_EXIST; SQLSTATE:HY000Message: The foreign server name you are trying to reference does not exist. Data source error: %s
Error number:
1478; Symbol:ER_ILLEGAL_HA_CREATE_OPTION; SQLSTATE:HY000Message: Table storage engine '%s' does not support the create option '%s'
Error number:
1479; Symbol:ER_PARTITION_REQUIRES_VALUES_ERROR; SQLSTATE:HY000Message: Syntax error: %s PARTITIONING requires definition of VALUES %s for each partition
Error number:
1480; Symbol:ER_PARTITION_WRONG_VALUES_ERROR; SQLSTATE:HY000Message: Only %s PARTITIONING can use VALUES %s in partition definition
Error number:
1481; Symbol:ER_PARTITION_MAXVALUE_ERROR; SQLSTATE:HY000Message: MAXVALUE can only be used in last partition definition
Error number:
1482; Symbol:ER_PARTITION_SUBPARTITION_ERROR; SQLSTATE:HY000Message: Subpartitions can only be hash partitions and by key
Error number:
1483; Symbol:ER_PARTITION_SUBPART_MIX_ERROR; SQLSTATE:HY000Message: Must define subpartitions on all partitions if on one partition
Error number:
1484; Symbol:ER_PARTITION_WRONG_NO_PART_ERROR; SQLSTATE:HY000Message: Wrong number of partitions defined, mismatch with previous setting
Error number:
1485; Symbol:ER_PARTITION_WRONG_NO_SUBPART_ERROR; SQLSTATE:HY000Message: Wrong number of subpartitions defined, mismatch with previous setting
Error number:
1486; Symbol:ER_WRONG_EXPR_IN_PARTITION_FUNC_ERROR; SQLSTATE:HY000Message: Constant, random or timezone-dependent expressions in (sub)partitioning function are not allowed
Error number:
1487; Symbol:ER_NO_CONST_EXPR_IN_RANGE_OR_LIST_ERROR; SQLSTATE:HY000Message: Expression in RANGE/LIST VALUES must be constant
Error number:
1488; Symbol:ER_FIELD_NOT_FOUND_PART_ERROR; SQLSTATE:HY000Message: Field in list of fields for partition function not found in table
Error number:
1489; Symbol:ER_LIST_OF_FIELDS_ONLY_IN_HASH_ERROR; SQLSTATE:HY000Message: List of fields is only allowed in KEY partitions
Error number:
1490; Symbol:ER_INCONSISTENT_PARTITION_INFO_ERROR; SQLSTATE:HY000Message: The partition info in the frm file is not consistent with what can be written into the frm file
Error number:
1491; Symbol:ER_PARTITION_FUNC_NOT_ALLOWED_ERROR; SQLSTATE:HY000Message: The %s function returns the wrong type
Error number:
1492; Symbol:ER_PARTITIONS_MUST_BE_DEFINED_ERROR; SQLSTATE:HY000Message: For %s partitions each partition must be defined
Error number:
1493; Symbol:ER_RANGE_NOT_INCREASING_ERROR; SQLSTATE:HY000Message: VALUES LESS THAN value must be strictly increasing for each partition
Error number:
1494; Symbol:ER_INCONSISTENT_TYPE_OF_FUNCTIONS_ERROR; SQLSTATE:HY000Message: VALUES value must be of same type as partition function
Error number:
1495; Symbol:ER_MULTIPLE_DEF_CONST_IN_LIST_PART_ERROR; SQLSTATE:HY000Message: Multiple definition of same constant in list partitioning
Error number:
1496; Symbol:ER_PARTITION_ENTRY_ERROR; SQLSTATE:HY000Message: Partitioning can not be used stand-alone in query
Error number:
1497; Symbol:ER_MIX_HANDLER_ERROR; SQLSTATE:HY000Message: The mix of handlers in the partitions is not allowed in this version of MySQL
Error number:
1498; Symbol:ER_PARTITION_NOT_DEFINED_ERROR; SQLSTATE:HY000Message: For the partitioned engine it is necessary to define all %s
Error number:
1499; Symbol:ER_TOO_MANY_PARTITIONS_ERROR; SQLSTATE:HY000Message: Too many partitions (including subpartitions) were defined
Error number:
1500; Symbol:ER_SUBPARTITION_ERROR; SQLSTATE:HY000Message: It is only possible to mix RANGE/LIST partitioning with HASH/KEY partitioning for subpartitioning
Error number:
1501; Symbol:ER_CANT_CREATE_HANDLER_FILE; SQLSTATE:HY000Message: Failed to create specific handler file
Error number:
1502; Symbol:ER_BLOB_FIELD_IN_PART_FUNC_ERROR; SQLSTATE:HY000Message: A BLOB field is not allowed in partition function
Error number:
1503; Symbol:ER_UNIQUE_KEY_NEED_ALL_FIELDS_IN_PF; SQLSTATE:HY000Message: A %s must include all columns in the table's partitioning function
Error number:
1504; Symbol:ER_NO_PARTS_ERROR; SQLSTATE:HY000Message: Number of %s = 0 is not an allowed value
Error number:
1505; Symbol:ER_PARTITION_MGMT_ON_NONPARTITIONED; SQLSTATE:HY000Message: Partition management on a not partitioned table is not possible
Error number:
1506; Symbol:ER_FOREIGN_KEY_ON_PARTITIONED; SQLSTATE:HY000Message: Foreign key clause is not yet supported in conjunction with partitioning
Error number:
1507; Symbol:ER_DROP_PARTITION_NON_EXISTENT; SQLSTATE:HY000Message: Error in list of partitions to %s
Error number:
1508; Symbol:ER_DROP_LAST_PARTITION; SQLSTATE:HY000Message: Cannot remove all partitions, use DROP TABLE instead
Error number:
1509; Symbol:ER_COALESCE_ONLY_ON_HASH_PARTITION; SQLSTATE:HY000Message: COALESCE PARTITION can only be used on HASH/KEY partitions
Error number:
1510; Symbol:ER_REORG_HASH_ONLY_ON_SAME_NO; SQLSTATE:HY000Message: REORGANIZE PARTITION can only be used to reorganize partitions not to change their numbers
Error number:
1511; Symbol:ER_REORG_NO_PARAM_ERROR; SQLSTATE:HY000Message: REORGANIZE PARTITION without parameters can only be used on auto-partitioned tables using HASH PARTITIONs
Error number:
1512; Symbol:ER_ONLY_ON_RANGE_LIST_PARTITION; SQLSTATE:HY000Message: %s PARTITION can only be used on RANGE/LIST partitions
Error number:
1513; Symbol:ER_ADD_PARTITION_SUBPART_ERROR; SQLSTATE:HY000Message: Trying to Add partition(s) with wrong number of subpartitions
Error number:
1514; Symbol:ER_ADD_PARTITION_NO_NEW_PARTITION; SQLSTATE:HY000Message: At least one partition must be added
Error number:
1515; Symbol:ER_COALESCE_PARTITION_NO_PARTITION; SQLSTATE:HY000Message: At least one partition must be coalesced
Error number:
1516; Symbol:ER_REORG_PARTITION_NOT_EXIST; SQLSTATE:HY000Message: More partitions to reorganize than there are partitions
Error number:
1517; Symbol:ER_SAME_NAME_PARTITION; SQLSTATE:HY000Message: Duplicate partition name %s
Error number:
1518; Symbol:ER_NO_BINLOG_ERROR; SQLSTATE:HY000Message: It is not allowed to shut off binlog on this command
Error number:
1519; Symbol:ER_CONSECUTIVE_REORG_PARTITIONS; SQLSTATE:HY000Message: When reorganizing a set of partitions they must be in consecutive order
Error number:
1520; Symbol:ER_REORG_OUTSIDE_RANGE; SQLSTATE:HY000Message: Reorganize of range partitions cannot change total ranges except for last partition where it can extend the range
Error number:
1521; Symbol:ER_PARTITION_FUNCTION_FAILURE; SQLSTATE:HY000Message: Partition function not supported in this version for this handler
Error number:
1522; Symbol:ER_PART_STATE_ERROR; SQLSTATE:HY000Message: Partition state cannot be defined from CREATE/ALTER TABLE
Error number:
1523; Symbol:ER_LIMITED_PART_RANGE; SQLSTATE:HY000Message: The %s handler only supports 32 bit integers in VALUES
Error number:
1524; Symbol:ER_PLUGIN_IS_NOT_LOADED; SQLSTATE:HY000Message: Plugin '%s' is not loaded
Error number:
1525; Symbol:ER_WRONG_VALUE; SQLSTATE:HY000Message: Incorrect %s value: '%s'
Error number:
1526; Symbol:ER_NO_PARTITION_FOR_GIVEN_VALUE; SQLSTATE:HY000Message: Table has no partition for value %s
Error number:
1527; Symbol:ER_FILEGROUP_OPTION_ONLY_ONCE; SQLSTATE:HY000Message: It is not allowed to specify %s more than once
Error number:
1528; Symbol:ER_CREATE_FILEGROUP_FAILED; SQLSTATE:HY000Message: Failed to create %s
Error number:
1529; Symbol:ER_DROP_FILEGROUP_FAILED; SQLSTATE:HY000Message: Failed to drop %s
Error number:
1530; Symbol:ER_TABLESPACE_AUTO_EXTEND_ERROR; SQLSTATE:HY000Message: The handler doesn't support autoextend of tablespaces
Error number:
1531; Symbol:ER_WRONG_SIZE_NUMBER; SQLSTATE:HY000Message: A size parameter was incorrectly specified, either number or on the form 10M
Error number:
1532; Symbol:ER_SIZE_OVERFLOW_ERROR; SQLSTATE:HY000Message: The size number was correct but we don't allow the digit part to be more than 2 billion
Error number:
1533; Symbol:ER_ALTER_FILEGROUP_FAILED; SQLSTATE:HY000Message: Failed to alter: %s
Error number:
1534; Symbol:ER_BINLOG_ROW_LOGGING_FAILED; SQLSTATE:HY000Message: Writing one row to the row-based binary log failed
Error number:
1535; Symbol:ER_BINLOG_ROW_WRONG_TABLE_DEF; SQLSTATE:HY000Message: Table definition on master and slave does not match: %s
Error number:
1536; Symbol:ER_BINLOG_ROW_RBR_TO_SBR; SQLSTATE:HY000Message: Slave running with --log-slave-updates must use row-based binary logging to be able to replicate row-based binary log events
Error number:
1537; Symbol:ER_EVENT_ALREADY_EXISTS; SQLSTATE:HY000Message: Event '%s' already exists
Error number:
1538; Symbol:ER_EVENT_STORE_FAILED; SQLSTATE:HY000Message: Failed to store event %s. Error code %d from storage engine.
Error number:
1539; Symbol:ER_EVENT_DOES_NOT_EXIST; SQLSTATE:HY000Message: Unknown event '%s'
Error number:
1540; Symbol:ER_EVENT_CANT_ALTER; SQLSTATE:HY000Message: Failed to alter event '%s'
Error number:
1541; Symbol:ER_EVENT_DROP_FAILED; SQLSTATE:HY000Message: Failed to drop %s
Error number:
1542; Symbol:ER_EVENT_INTERVAL_NOT_POSITIVE_OR_TOO_BIG; SQLSTATE:HY000Message: INTERVAL is either not positive or too big
Error number:
1543; Symbol:ER_EVENT_ENDS_BEFORE_STARTS; SQLSTATE:HY000Message: ENDS is either invalid or before STARTS
Error number:
1544; Symbol:ER_EVENT_EXEC_TIME_IN_THE_PAST; SQLSTATE:HY000Message: Event execution time is in the past. Event has been disabled
Error number:
1545; Symbol:ER_EVENT_OPEN_TABLE_FAILED; SQLSTATE:HY000Message: Failed to open mysql.event
Error number:
1546; Symbol:ER_EVENT_NEITHER_M_EXPR_NOR_M_AT; SQLSTATE:HY000Message: No datetime expression provided
Error number:
1547; Symbol:ER_OBSOLETE_COL_COUNT_DOESNT_MATCH_CORRUPTED; SQLSTATE:HY000Message: Column count of mysql.%s is wrong. Expected %d, found %d. The table is probably corrupted
Error number:
1548; Symbol:ER_OBSOLETE_CANNOT_LOAD_FROM_TABLE; SQLSTATE:HY000Message: Cannot load from mysql.%s. The table is probably corrupted
Error number:
1549; Symbol:ER_EVENT_CANNOT_DELETE; SQLSTATE:HY000Message: Failed to delete the event from mysql.event
Error number:
1550; Symbol:ER_EVENT_COMPILE_ERROR; SQLSTATE:HY000Message: Error during compilation of event's body
Error number:
1551; Symbol:ER_EVENT_SAME_NAME; SQLSTATE:HY000Message: Same old and new event name
Error number:
1552; Symbol:ER_EVENT_DATA_TOO_LONG; SQLSTATE:HY000Message: Data for column '%s' too long
Error number:
1553; Symbol:ER_DROP_INDEX_FK; SQLSTATE:HY000Message: Cannot drop index '%s': needed in a foreign key constraint
InnoDBreports this error when you attempt to drop the last index that can enforce a particular referential constraint.For optimal performance with DML statements,
InnoDBrequires an index to exist on foreign key columns, so thatUPDATEandDELETEoperations on a parent table can easily check whether corresponding rows exist in the child table. MySQL creates or drops such indexes automatically when needed, as a side-effect ofCREATE TABLE,CREATE INDEX, andALTER TABLEstatements.When you drop an index,
InnoDBchecks if the index is used for checking a foreign key constraint. It is still OK to drop the index if there is another index that can be used to enforce the same constraint.InnoDBprevents you from dropping the last index that can enforce a particular referential constraint.Error number:
1554; Symbol:ER_WARN_DEPRECATED_SYNTAX_WITH_VER; SQLSTATE:HY000Message: The syntax '%s' is deprecated and will be removed in MySQL %s. Please use %s instead
Error number:
1555; Symbol:ER_CANT_WRITE_LOCK_LOG_TABLE; SQLSTATE:HY000Message: You can't write-lock a log table. Only read access is possible
Error number:
1556; Symbol:ER_CANT_LOCK_LOG_TABLE; SQLSTATE:HY000Message: You can't use locks with log tables.
Error number:
1557; Symbol:ER_FOREIGN_DUPLICATE_KEY; SQLSTATE:23000Message: Upholding foreign key constraints for table '%s', entry '%s', key %d would lead to a duplicate entry
In 5.6.4:
ER_FOREIGN_DUPLICATE_KEYwas renamed toER_FOREIGN_DUPLICATE_KEY_OLD_UNUSED.ER_FOREIGN_DUPLICATE_KEYwas removed after 5.6.3.Error number:
1557; Symbol:ER_FOREIGN_DUPLICATE_KEY_OLD_UNUSED; SQLSTATE:23000Message: Upholding foreign key constraints for table '%s', entry '%s', key %d would lead to a duplicate entry
In 5.6.4:
ER_FOREIGN_DUPLICATE_KEYwas renamed toER_FOREIGN_DUPLICATE_KEY_OLD_UNUSED.ER_FOREIGN_DUPLICATE_KEY_OLD_UNUSEDwas added in 5.6.4.Error number:
1558; Symbol:ER_COL_COUNT_DOESNT_MATCH_PLEASE_UPDATE; SQLSTATE:HY000Message: Column count of mysql.%s is wrong. Expected %d, found %d. Created with MySQL %d, now running %d. Please use mysql_upgrade to fix this error.
Error number:
1559; Symbol:ER_TEMP_TABLE_PREVENTS_SWITCH_OUT_OF_RBR; SQLSTATE:HY000Message: Cannot switch out of the row-based binary log format when the session has open temporary tables
Error number:
1560; Symbol:ER_STORED_FUNCTION_PREVENTS_SWITCH_BINLOG_FORMAT; SQLSTATE:HY000Message: Cannot change the binary logging format inside a stored function or trigger
Error number:
1561; Symbol:ER_NDB_CANT_SWITCH_BINLOG_FORMAT; SQLSTATE:HY000Message: The NDB cluster engine does not support changing the binlog format on the fly yet
Error number:
1562; Symbol:ER_PARTITION_NO_TEMPORARY; SQLSTATE:HY000Message: Cannot create temporary table with partitions
Error number:
1563; Symbol:ER_PARTITION_CONST_DOMAIN_ERROR; SQLSTATE:HY000Message: Partition constant is out of partition function domain
Error number:
1564; Symbol:ER_PARTITION_FUNCTION_IS_NOT_ALLOWED; SQLSTATE:HY000Message: This partition function is not allowed
Error number:
1565; Symbol:ER_DDL_LOG_ERROR; SQLSTATE:HY000Message: Error in DDL log
Error number:
1566; Symbol:ER_NULL_IN_VALUES_LESS_THAN; SQLSTATE:HY000Message: Not allowed to use NULL value in VALUES LESS THAN
Error number:
1567; Symbol:ER_WRONG_PARTITION_NAME; SQLSTATE:HY000Message: Incorrect partition name
Error number:
1568; Symbol:ER_CANT_CHANGE_TX_ISOLATION; SQLSTATE:25001Message: Transaction isolation level can't be changed while a transaction is in progress
In 5.6.5:
ER_CANT_CHANGE_TX_ISOLATIONwas renamed toER_CANT_CHANGE_TX_CHARACTERISTICS.ER_CANT_CHANGE_TX_ISOLATIONwas removed after 5.6.4.Error number:
1568; Symbol:ER_CANT_CHANGE_TX_CHARACTERISTICS; SQLSTATE:25001Message: Transaction characteristics can't be changed while a transaction is in progress
In 5.6.5:
ER_CANT_CHANGE_TX_ISOLATIONwas renamed toER_CANT_CHANGE_TX_CHARACTERISTICS.ER_CANT_CHANGE_TX_CHARACTERISTICSwas added in 5.6.5.Error number:
1569; Symbol:ER_DUP_ENTRY_AUTOINCREMENT_CASE; SQLSTATE:HY000Message: ALTER TABLE causes auto_increment resequencing, resulting in duplicate entry '%s' for key '%s'
Error number:
1570; Symbol:ER_EVENT_MODIFY_QUEUE_ERROR; SQLSTATE:HY000Message: Internal scheduler error %d
Error number:
1571; Symbol:ER_EVENT_SET_VAR_ERROR; SQLSTATE:HY000Message: Error during starting/stopping of the scheduler. Error code %u
Error number:
1572; Symbol:ER_PARTITION_MERGE_ERROR; SQLSTATE:HY000Message: Engine cannot be used in partitioned tables
Error number:
1573; Symbol:ER_CANT_ACTIVATE_LOG; SQLSTATE:HY000Message: Cannot activate '%s' log
Error number:
1574; Symbol:ER_RBR_NOT_AVAILABLE; SQLSTATE:HY000Message: The server was not built with row-based replication
Error number:
1575; Symbol:ER_BASE64_DECODE_ERROR; SQLSTATE:HY000Message: Decoding of base64 string failed
Error number:
1576; Symbol:ER_EVENT_RECURSION_FORBIDDEN; SQLSTATE:HY000Message: Recursion of EVENT DDL statements is forbidden when body is present
Error number:
1577; Symbol:ER_EVENTS_DB_ERROR; SQLSTATE:HY000Message: Cannot proceed because system tables used by Event Scheduler were found damaged at server start
To address this issue, try running mysql_upgrade.
Error number:
1578; Symbol:ER_ONLY_INTEGERS_ALLOWED; SQLSTATE:HY000Message: Only integers allowed as number here
Error number:
1579; Symbol:ER_UNSUPORTED_LOG_ENGINE; SQLSTATE:HY000Message: This storage engine cannot be used for log tables"
Error number:
1580; Symbol:ER_BAD_LOG_STATEMENT; SQLSTATE:HY000Message: You cannot '%s' a log table if logging is enabled
Error number:
1581; Symbol:ER_CANT_RENAME_LOG_TABLE; SQLSTATE:HY000Message: Cannot rename '%s'. When logging enabled, rename to/from log table must rename two tables: the log table to an archive table and another table back to '%s'
Error number:
1582; Symbol:ER_WRONG_PARAMCOUNT_TO_NATIVE_FCT; SQLSTATE:42000Message: Incorrect parameter count in the call to native function '%s'
Error number:
1583; Symbol:ER_WRONG_PARAMETERS_TO_NATIVE_FCT; SQLSTATE:42000Message: Incorrect parameters in the call to native function '%s'
Error number:
1584; Symbol:ER_WRONG_PARAMETERS_TO_STORED_FCT; SQLSTATE:42000Message: Incorrect parameters in the call to stored function '%s'
Error number:
1585; Symbol:ER_NATIVE_FCT_NAME_COLLISION; SQLSTATE:HY000Message: This function '%s' has the same name as a native function
Error number:
1586; Symbol:ER_DUP_ENTRY_WITH_KEY_NAME; SQLSTATE:23000Message: Duplicate entry '%s' for key '%s'
The format string for this error is also used with
ER_DUP_ENTRY.Error number:
1587; Symbol:ER_BINLOG_PURGE_EMFILE; SQLSTATE:HY000Message: Too many files opened, please execute the command again
Error number:
1588; Symbol:ER_EVENT_CANNOT_CREATE_IN_THE_PAST; SQLSTATE:HY000Message: Event execution time is in the past and ON COMPLETION NOT PRESERVE is set. The event was dropped immediately after creation.
Error number:
1589; Symbol:ER_EVENT_CANNOT_ALTER_IN_THE_PAST; SQLSTATE:HY000Message: Event execution time is in the past and ON COMPLETION NOT PRESERVE is set. The event was not changed. Specify a time in the future.
Error number:
1590; Symbol:ER_SLAVE_INCIDENT; SQLSTATE:HY000Message: The incident %s occured on the master. Message: %s
Error number:
1591; Symbol:ER_NO_PARTITION_FOR_GIVEN_VALUE_SILENT; SQLSTATE:HY000Message: Table has no partition for some existing values
Error number:
1592; Symbol:ER_BINLOG_UNSAFE_STATEMENT; SQLSTATE:HY000Message: Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. %s
Error number:
1593; Symbol:ER_SLAVE_FATAL_ERROR; SQLSTATE:HY000Message: Fatal error: %s
Error number:
1594; Symbol:ER_SLAVE_RELAY_LOG_READ_FAILURE; SQLSTATE:HY000Message: Relay log read failure: %s
Error number:
1595; Symbol:ER_SLAVE_RELAY_LOG_WRITE_FAILURE; SQLSTATE:HY000Message: Relay log write failure: %s
Error number:
1596; Symbol:ER_SLAVE_CREATE_EVENT_FAILURE; SQLSTATE:HY000Message: Failed to create %s
Error number:
1597; Symbol:ER_SLAVE_MASTER_COM_FAILURE; SQLSTATE:HY000Message: Master command %s failed: %s
Error number:
1598; Symbol:ER_BINLOG_LOGGING_IMPOSSIBLE; SQLSTATE:HY000Message: Binary logging not possible. Message: %s
Error number:
1599; Symbol:ER_VIEW_NO_CREATION_CTX; SQLSTATE:HY000Message: View `%s`.`%s` has no creation context
Error number:
1600; Symbol:ER_VIEW_INVALID_CREATION_CTX; SQLSTATE:HY000Message: Creation context of view `%s`.`%s' is invalid
Error number:
1601; Symbol:ER_SR_INVALID_CREATION_CTX; SQLSTATE:HY000Message: Creation context of stored routine `%s`.`%s` is invalid
Error number:
1602; Symbol:ER_TRG_CORRUPTED_FILE; SQLSTATE:HY000Message: Corrupted TRG file for table `%s`.`%s`
Error number:
1603; Symbol:ER_TRG_NO_CREATION_CTX; SQLSTATE:HY000Message: Triggers for table `%s`.`%s` have no creation context
Error number:
1604; Symbol:ER_TRG_INVALID_CREATION_CTX; SQLSTATE:HY000Message: Trigger creation context of table `%s`.`%s` is invalid
Error number:
1605; Symbol:ER_EVENT_INVALID_CREATION_CTX; SQLSTATE:HY000Message: Creation context of event `%s`.`%s` is invalid
Error number:
1606; Symbol:ER_TRG_CANT_OPEN_TABLE; SQLSTATE:HY000Message: Cannot open table for trigger `%s`.`%s`
Error number:
1607; Symbol:ER_CANT_CREATE_SROUTINE; SQLSTATE:HY000Message: Cannot create stored routine `%s`. Check warnings
Error number:
1608; Symbol:ER_NEVER_USED; SQLSTATE:HY000Message: Ambiguous slave modes combination. %s
Error number:
1609; Symbol:ER_NO_FORMAT_DESCRIPTION_EVENT_BEFORE_BINLOG_STATEMENT; SQLSTATE:HY000Message: The BINLOG statement of type `%s` was not preceded by a format description BINLOG statement.
Error number:
1610; Symbol:ER_SLAVE_CORRUPT_EVENT; SQLSTATE:HY000Message: Corrupted replication event was detected
Error number:
1611; Symbol:ER_LOAD_DATA_INVALID_COLUMN; SQLSTATE:HY000Message: Invalid column reference (%s) in LOAD DATA
Error number:
1612; Symbol:ER_LOG_PURGE_NO_FILE; SQLSTATE:HY000Message: Being purged log %s was not found
Error number:
1613; Symbol:ER_XA_RBTIMEOUT; SQLSTATE:XA106Message: XA_RBTIMEOUT: Transaction branch was rolled back: took too long
Error number:
1614; Symbol:ER_XA_RBDEADLOCK; SQLSTATE:XA102Message: XA_RBDEADLOCK: Transaction branch was rolled back: deadlock was detected
Error number:
1615; Symbol:ER_NEED_REPREPARE; SQLSTATE:HY000Message: Prepared statement needs to be re-prepared
Error number:
1616; Symbol:ER_DELAYED_NOT_SUPPORTED; SQLSTATE:HY000Message: DELAYED option not supported for table '%s'
Error number:
1617; Symbol:WARN_NO_MASTER_INFO; SQLSTATE:HY000Message: The master info structure does not exist
Error number:
1618; Symbol:WARN_OPTION_IGNORED; SQLSTATE:HY000Message: <%s> option ignored
Error number:
1619; Symbol:WARN_PLUGIN_DELETE_BUILTIN; SQLSTATE:HY000Message: Built-in plugins cannot be deleted
Error number:
1620; Symbol:WARN_PLUGIN_BUSY; SQLSTATE:HY000Message: Plugin is busy and will be uninstalled on shutdown
Error number:
1621; Symbol:ER_VARIABLE_IS_READONLY; SQLSTATE:HY000Message: %s variable '%s' is read-only. Use SET %s to assign the value
Error number:
1622; Symbol:ER_WARN_ENGINE_TRANSACTION_ROLLBACK; SQLSTATE:HY000Message: Storage engine %s does not support rollback for this statement. Transaction rolled back and must be restarted
Error number:
1623; Symbol:ER_SLAVE_HEARTBEAT_FAILURE; SQLSTATE:HY000Message: Unexpected master's heartbeat data: %s
Error number:
1624; Symbol:ER_SLAVE_HEARTBEAT_VALUE_OUT_OF_RANGE; SQLSTATE:HY000Message: The requested value for the heartbeat period is either negative or exceeds the maximum allowed (%s seconds).
Error number:
1625; Symbol:ER_NDB_REPLICATION_SCHEMA_ERROR; SQLSTATE:HY000Message: Bad schema for mysql.ndb_replication table. Message: %s
Error number:
1626; Symbol:ER_CONFLICT_FN_PARSE_ERROR; SQLSTATE:HY000Message: Error in parsing conflict function. Message: %s
Error number:
1627; Symbol:ER_EXCEPTIONS_WRITE_ERROR; SQLSTATE:HY000Message: Write to exceptions table failed. Message: %s"
Error number:
1628; Symbol:ER_TOO_LONG_TABLE_COMMENT; SQLSTATE:HY000Message: Comment for table '%s' is too long (max = %lu)
Error number:
1629; Symbol:ER_TOO_LONG_FIELD_COMMENT; SQLSTATE:HY000Message: Comment for field '%s' is too long (max = %lu)
Error number:
1630; Symbol:ER_FUNC_INEXISTENT_NAME_COLLISION; SQLSTATE:42000Message: FUNCTION %s does not exist. Check the 'Function Name Parsing and Resolution' section in the Reference Manual
Error number:
1631; Symbol:ER_DATABASE_NAME; SQLSTATE:HY000Message: Database
Error number:
1632; Symbol:ER_TABLE_NAME; SQLSTATE:HY000Message: Table
Error number:
1633; Symbol:ER_PARTITION_NAME; SQLSTATE:HY000Message: Partition
Error number:
1634; Symbol:ER_SUBPARTITION_NAME; SQLSTATE:HY000Message: Subpartition
Error number:
1635; Symbol:ER_TEMPORARY_NAME; SQLSTATE:HY000Message: Temporary
Error number:
1636; Symbol:ER_RENAMED_NAME; SQLSTATE:HY000Message: Renamed
Error number:
1637; Symbol:ER_TOO_MANY_CONCURRENT_TRXS; SQLSTATE:HY000Message: Too many active concurrent transactions
Error number:
1638; Symbol:WARN_NON_ASCII_SEPARATOR_NOT_IMPLEMENTED; SQLSTATE:HY000Message: Non-ASCII separator arguments are not fully supported
Error number:
1639; Symbol:ER_DEBUG_SYNC_TIMEOUT; SQLSTATE:HY000Message: debug sync point wait timed out
Error number:
1640; Symbol:ER_DEBUG_SYNC_HIT_LIMIT; SQLSTATE:HY000Message: debug sync point hit limit reached
Error number:
1641; Symbol:ER_DUP_SIGNAL_SET; SQLSTATE:42000Message: Duplicate condition information item '%s'
Error number:
1642; Symbol:ER_SIGNAL_WARN; SQLSTATE:01000Message: Unhandled user-defined warning condition
Error number:
1643; Symbol:ER_SIGNAL_NOT_FOUND; SQLSTATE:02000Message: Unhandled user-defined not found condition
Error number:
1644; Symbol:ER_SIGNAL_EXCEPTION; SQLSTATE:HY000Message: Unhandled user-defined exception condition
Error number:
1645; Symbol:ER_RESIGNAL_WITHOUT_ACTIVE_HANDLER; SQLSTATE:0K000Message: RESIGNAL when handler not active
Error number:
1646; Symbol:ER_SIGNAL_BAD_CONDITION_TYPE; SQLSTATE:HY000Message: SIGNAL/RESIGNAL can only use a CONDITION defined with SQLSTATE
Error number:
1647; Symbol:WARN_COND_ITEM_TRUNCATED; SQLSTATE:HY000Message: Data truncated for condition item '%s'
Error number:
1648; Symbol:ER_COND_ITEM_TOO_LONG; SQLSTATE:HY000Message: Data too long for condition item '%s'
Error number:
1649; Symbol:ER_UNKNOWN_LOCALE; SQLSTATE:HY000Message: Unknown locale: '%s'
Error number:
1650; Symbol:ER_SLAVE_IGNORE_SERVER_IDS; SQLSTATE:HY000Message: The requested server id %d clashes with the slave startup option --replicate-same-server-id
Error number:
1651; Symbol:ER_QUERY_CACHE_DISABLED; SQLSTATE:HY000Message: Query cache is disabled; restart the server with query_cache_type=1 to enable it
Error number:
1652; Symbol:ER_SAME_NAME_PARTITION_FIELD; SQLSTATE:HY000Message: Duplicate partition field name '%s'
Error number:
1653; Symbol:ER_PARTITION_COLUMN_LIST_ERROR; SQLSTATE:HY000Message: Inconsistency in usage of column lists for partitioning
Error number:
1654; Symbol:ER_WRONG_TYPE_COLUMN_VALUE_ERROR; SQLSTATE:HY000Message: Partition column values of incorrect type
Error number:
1655; Symbol:ER_TOO_MANY_PARTITION_FUNC_FIELDS_ERROR; SQLSTATE:HY000Message: Too many fields in '%s'
Error number:
1656; Symbol:ER_MAXVALUE_IN_VALUES_IN; SQLSTATE:HY000Message: Cannot use MAXVALUE as value in VALUES IN
Error number:
1657; Symbol:ER_TOO_MANY_VALUES_ERROR; SQLSTATE:HY000Message: Cannot have more than one value for this type of %s partitioning
Error number:
1658; Symbol:ER_ROW_SINGLE_PARTITION_FIELD_ERROR; SQLSTATE:HY000Message: Row expressions in VALUES IN only allowed for multi-field column partitioning
Error number:
1659; Symbol:ER_FIELD_TYPE_NOT_ALLOWED_AS_PARTITION_FIELD; SQLSTATE:HY000Message: Field '%s' is of a not allowed type for this type of partitioning
Error number:
1660; Symbol:ER_PARTITION_FIELDS_TOO_LONG; SQLSTATE:HY000Message: The total length of the partitioning fields is too large
Error number:
1661; Symbol:ER_BINLOG_ROW_ENGINE_AND_STMT_ENGINE; SQLSTATE:HY000Message: Cannot execute statement: impossible to write to binary log since both row-incapable engines and statement-incapable engines are involved.
Error number:
1662; Symbol:ER_BINLOG_ROW_MODE_AND_STMT_ENGINE; SQLSTATE:HY000Message: Cannot execute statement: impossible to write to binary log since BINLOG_FORMAT = ROW and at least one table uses a storage engine limited to statement-based logging.
Error number:
1663; Symbol:ER_BINLOG_UNSAFE_AND_STMT_ENGINE; SQLSTATE:HY000Message: Cannot execute statement: impossible to write to binary log since statement is unsafe, storage engine is limited to statement-based logging, and BINLOG_FORMAT = MIXED. %s
Error number:
1664; Symbol:ER_BINLOG_ROW_INJECTION_AND_STMT_ENGINE; SQLSTATE:HY000Message: Cannot execute statement: impossible to write to binary log since statement is in row format and at least one table uses a storage engine limited to statement-based logging.
Error number:
1665; Symbol:ER_BINLOG_STMT_MODE_AND_ROW_ENGINE; SQLSTATE:HY000Message: Cannot execute statement: impossible to write to binary log since BINLOG_FORMAT = STATEMENT and at least one table uses a storage engine limited to row-based logging.%s
Error number:
1666; Symbol:ER_BINLOG_ROW_INJECTION_AND_STMT_MODE; SQLSTATE:HY000Message: Cannot execute statement: impossible to write to binary log since statement is in row format and BINLOG_FORMAT = STATEMENT.
Error number:
1667; Symbol:ER_BINLOG_MULTIPLE_ENGINES_AND_SELF_LOGGING_ENGINE; SQLSTATE:HY000Message: Cannot execute statement: impossible to write to binary log since more than one engine is involved and at least one engine is self-logging.
Error number:
1668; Symbol:ER_BINLOG_UNSAFE_LIMIT; SQLSTATE:HY000Message: The statement is unsafe because it uses a LIMIT clause. This is unsafe because the set of rows included cannot be predicted.
Error number:
1669; Symbol:ER_BINLOG_UNSAFE_INSERT_DELAYED; SQLSTATE:HY000Message: The statement is unsafe because it uses INSERT DELAYED. This is unsafe because the times when rows are inserted cannot be predicted.
Error number:
1670; Symbol:ER_BINLOG_UNSAFE_SYSTEM_TABLE; SQLSTATE:HY000Message: The statement is unsafe because it uses the general log, slow query log, or performance_schema table(s). This is unsafe because system tables may differ on slaves.
Error number:
1671; Symbol:ER_BINLOG_UNSAFE_AUTOINC_COLUMNS; SQLSTATE:HY000Message: Statement is unsafe because it invokes a trigger or a stored function that inserts into an AUTO_INCREMENT column. Inserted values cannot be logged correctly.
Error number:
1672; Symbol:ER_BINLOG_UNSAFE_UDF; SQLSTATE:HY000Message: Statement is unsafe because it uses a UDF which may not return the same value on the slave.
Error number:
1673; Symbol:ER_BINLOG_UNSAFE_SYSTEM_VARIABLE; SQLSTATE:HY000Message: Statement is unsafe because it uses a system variable that may have a different value on the slave.
Error number:
1674; Symbol:ER_BINLOG_UNSAFE_SYSTEM_FUNCTION; SQLSTATE:HY000Message: Statement is unsafe because it uses a system function that may return a different value on the slave.
Error number:
1675; Symbol:ER_BINLOG_UNSAFE_NONTRANS_AFTER_TRANS; SQLSTATE:HY000Message: Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
Error number:
1676; Symbol:ER_MESSAGE_AND_STATEMENT; SQLSTATE:HY000Message: %s Statement: %s
Error number:
1677; Symbol:ER_SLAVE_CONVERSION_FAILED; SQLSTATE:HY000Message: Column %d of table '%s.%s' cannot be converted from type '%s' to type '%s'
Error number:
1678; Symbol:ER_SLAVE_CANT_CREATE_CONVERSION; SQLSTATE:HY000Message: Can't create conversion table for table '%s.%s'
Error number:
1679; Symbol:ER_INSIDE_TRANSACTION_PREVENTS_SWITCH_BINLOG_FORMAT; SQLSTATE:HY000Message: Cannot modify @@session.binlog_format inside a transaction
Error number:
1680; Symbol:ER_PATH_LENGTH; SQLSTATE:HY000Message: The path specified for %s is too long.
Error number:
1681; Symbol:ER_WARN_DEPRECATED_SYNTAX_NO_REPLACEMENT; SQLSTATE:HY000Message: '%s' is deprecated and will be removed in a future release.
Error number:
1682; Symbol:ER_WRONG_NATIVE_TABLE_STRUCTURE; SQLSTATE:HY000Message: Native table '%s'.'%s' has the wrong structure
Error number:
1683; Symbol:ER_WRONG_PERFSCHEMA_USAGE; SQLSTATE:HY000Message: Invalid performance_schema usage.
Error number:
1684; Symbol:ER_WARN_I_S_SKIPPED_TABLE; SQLSTATE:HY000Message: Table '%s'.'%s' was skipped since its definition is being modified by concurrent DDL statement
Error number:
1685; Symbol:ER_INSIDE_TRANSACTION_PREVENTS_SWITCH_BINLOG_DIRECT; SQLSTATE:HY000Message: Cannot modify @@session.binlog_direct_non_transactional_updates inside a transaction
Error number:
1686; Symbol:ER_STORED_FUNCTION_PREVENTS_SWITCH_BINLOG_DIRECT; SQLSTATE:HY000Message: Cannot change the binlog direct flag inside a stored function or trigger
Error number:
1687; Symbol:ER_SPATIAL_MUST_HAVE_GEOM_COL; SQLSTATE:42000Message: A SPATIAL index may only contain a geometrical type column
Error number:
1688; Symbol:ER_TOO_LONG_INDEX_COMMENT; SQLSTATE:HY000Message: Comment for index '%s' is too long (max = %lu)
Error number:
1689; Symbol:ER_LOCK_ABORTED; SQLSTATE:HY000Message: Wait on a lock was aborted due to a pending exclusive lock
Error number:
1690; Symbol:ER_DATA_OUT_OF_RANGE; SQLSTATE:22003Message: %s value is out of range in '%s'
Error number:
1691; Symbol:ER_WRONG_SPVAR_TYPE_IN_LIMIT; SQLSTATE:HY000Message: A variable of a non-integer based type in LIMIT clause
Error number:
1692; Symbol:ER_BINLOG_UNSAFE_MULTIPLE_ENGINES_AND_SELF_LOGGING_ENGINE; SQLSTATE:HY000Message: Mixing self-logging and non-self-logging engines in a statement is unsafe.
Error number:
1693; Symbol:ER_BINLOG_UNSAFE_MIXED_STATEMENT; SQLSTATE:HY000Message: Statement accesses nontransactional table as well as transactional or temporary table, and writes to any of them.
Error number:
1694; Symbol:ER_INSIDE_TRANSACTION_PREVENTS_SWITCH_SQL_LOG_BIN; SQLSTATE:HY000Message: Cannot modify @@session.sql_log_bin inside a transaction
Error number:
1695; Symbol:ER_STORED_FUNCTION_PREVENTS_SWITCH_SQL_LOG_BIN; SQLSTATE:HY000Message: Cannot change the sql_log_bin inside a stored function or trigger
Error number:
1696; Symbol:ER_FAILED_READ_FROM_PAR_FILE; SQLSTATE:HY000Message: Failed to read from the .par file
Error number:
1697; Symbol:ER_VALUES_IS_NOT_INT_TYPE_ERROR; SQLSTATE:HY000Message: VALUES value for partition '%s' must have type INT
ER_VALUES_IS_NOT_INT_TYPE_ERRORwas added in 5.6.1.Error number:
1698; Symbol:ER_ACCESS_DENIED_NO_PASSWORD_ERROR; SQLSTATE:28000Message: Access denied for user '%s'@'%s'
ER_ACCESS_DENIED_NO_PASSWORD_ERRORwas added in 5.6.1.Error number:
1699; Symbol:ER_SET_PASSWORD_AUTH_PLUGIN; SQLSTATE:HY000Message: SET PASSWORD has no significance for users authenticating via plugins
ER_SET_PASSWORD_AUTH_PLUGINwas added in 5.6.1.Error number:
1700; Symbol:ER_GRANT_PLUGIN_USER_EXISTS; SQLSTATE:HY000Message: GRANT with IDENTIFIED WITH is illegal because the user %-.*s already exists
ER_GRANT_PLUGIN_USER_EXISTSwas added in 5.6.1.Error number:
1701; Symbol:ER_TRUNCATE_ILLEGAL_FK; SQLSTATE:42000Message: Cannot truncate a table referenced in a foreign key constraint (%s)
ER_TRUNCATE_ILLEGAL_FKwas added in 5.6.1.Error number:
1702; Symbol:ER_PLUGIN_IS_PERMANENT; SQLSTATE:HY000Message: Plugin '%s' is force_plus_permanent and can not be unloaded
ER_PLUGIN_IS_PERMANENTwas added in 5.6.1.Error number:
1703; Symbol:ER_SLAVE_HEARTBEAT_VALUE_OUT_OF_RANGE_MIN; SQLSTATE:HY000Message: The requested value for the heartbeat period is less than 1 millisecond. The value is reset to 0, meaning that heartbeating will effectively be disabled.
ER_SLAVE_HEARTBEAT_VALUE_OUT_OF_RANGE_MINwas added in 5.6.1.Error number:
1704; Symbol:ER_SLAVE_HEARTBEAT_VALUE_OUT_OF_RANGE_MAX; SQLSTATE:HY000Message: The requested value for the heartbeat period exceeds the value of `slave_net_timeout' seconds. A sensible value for the period should be less than the timeout.
ER_SLAVE_HEARTBEAT_VALUE_OUT_OF_RANGE_MAXwas added in 5.6.1.Error number:
1705; Symbol:ER_STMT_CACHE_FULL; SQLSTATE:HY000Message: Multi-row statements required more than 'max_binlog_stmt_cache_size' bytes of storage; increase this mysqld variable and try again
ER_STMT_CACHE_FULLwas added in 5.6.1.Error number:
1706; Symbol:ER_MULTI_UPDATE_KEY_CONFLICT; SQLSTATE:HY000Message: Primary key/partition key update is not allowed since the table is updated both as '%s' and '%s'.
ER_MULTI_UPDATE_KEY_CONFLICTwas added in 5.6.2.Error number:
1707; Symbol:ER_TABLE_NEEDS_REBUILD; SQLSTATE:HY000Message: Table rebuild required. Please do "ALTER TABLE `%s` FORCE" or dump/reload to fix it!
ER_TABLE_NEEDS_REBUILDwas added in 5.6.3.Error number:
1708; Symbol:WARN_OPTION_BELOW_LIMIT; SQLSTATE:HY000Message: The value of '%s' should be no less than the value of '%s'
WARN_OPTION_BELOW_LIMITwas added in 5.6.3.Error number:
1709; Symbol:ER_INDEX_COLUMN_TOO_LONG; SQLSTATE:HY000Message: Index column size too large. The maximum column size is %lu bytes.
ER_INDEX_COLUMN_TOO_LONGwas added in 5.6.3.Error number:
1710; Symbol:ER_ERROR_IN_TRIGGER_BODY; SQLSTATE:HY000Message: Trigger '%s' has an error in its body: '%s'
ER_ERROR_IN_TRIGGER_BODYwas added in 5.6.3.Error number:
1711; Symbol:ER_ERROR_IN_UNKNOWN_TRIGGER_BODY; SQLSTATE:HY000Message: Unknown trigger has an error in its body: '%s'
ER_ERROR_IN_UNKNOWN_TRIGGER_BODYwas added in 5.6.3.Error number:
1712; Symbol:ER_INDEX_CORRUPT; SQLSTATE:HY000Message: Index %s is corrupted
ER_INDEX_CORRUPTwas added in 5.6.3.Error number:
1713; Symbol:ER_UNDO_RECORD_TOO_BIG; SQLSTATE:HY000Message: Undo log record is too big.
ER_UNDO_RECORD_TOO_BIGwas added in 5.6.4.Error number:
1714; Symbol:ER_BINLOG_UNSAFE_INSERT_IGNORE_SELECT; SQLSTATE:HY000Message: INSERT IGNORE... SELECT is unsafe because the order in which rows are retrieved by the SELECT determines which (if any) rows are ignored. This order cannot be predicted and may differ on master and the slave.
ER_BINLOG_UNSAFE_INSERT_IGNORE_SELECTwas added in 5.6.4.Error number:
1715; Symbol:ER_BINLOG_UNSAFE_INSERT_SELECT_UPDATE; SQLSTATE:HY000Message: INSERT... SELECT... ON DUPLICATE KEY UPDATE is unsafe because the order in which rows are retrieved by the SELECT determines which (if any) rows are updated. This order cannot be predicted and may differ on master and the slave.
ER_BINLOG_UNSAFE_INSERT_SELECT_UPDATEwas added in 5.6.4.Error number:
1716; Symbol:ER_BINLOG_UNSAFE_REPLACE_SELECT; SQLSTATE:HY000Message: REPLACE... SELECT is unsafe because the order in which rows are retrieved by the SELECT determines which (if any) rows are replaced. This order cannot be predicted and may differ on master and the slave.
ER_BINLOG_UNSAFE_REPLACE_SELECTwas added in 5.6.4.Error number:
1717; Symbol:ER_BINLOG_UNSAFE_CREATE_IGNORE_SELECT; SQLSTATE:HY000Message: CREATE... IGNORE SELECT is unsafe because the order in which rows are retrieved by the SELECT determines which (if any) rows are ignored. This order cannot be predicted and may differ on master and the slave.
ER_BINLOG_UNSAFE_CREATE_IGNORE_SELECTwas added in 5.6.4.Error number:
1718; Symbol:ER_BINLOG_UNSAFE_CREATE_REPLACE_SELECT; SQLSTATE:HY000Message: CREATE... REPLACE SELECT is unsafe because the order in which rows are retrieved by the SELECT determines which (if any) rows are replaced. This order cannot be predicted and may differ on master and the slave.
ER_BINLOG_UNSAFE_CREATE_REPLACE_SELECTwas added in 5.6.4.Error number:
1719; Symbol:ER_BINLOG_UNSAFE_UPDATE_IGNORE; SQLSTATE:HY000Message: UPDATE IGNORE is unsafe because the order in which rows are updated determines which (if any) rows are ignored. This order cannot be predicted and may differ on master and the slave.
ER_BINLOG_UNSAFE_UPDATE_IGNOREwas added in 5.6.4.Error number:
1720; Symbol:ER_PLUGIN_NO_UNINSTALL; SQLSTATE:HY000Message: Plugin '%s' is marked as not dynamically uninstallable. You have to stop the server to uninstall it.
ER_PLUGIN_NO_UNINSTALLwas added in 5.6.4.Error number:
1721; Symbol:ER_CANT_LOCK_RPL_INFO_TABLE; SQLSTATE:HY000Message: You can't use locks with rpl info tables.
ER_CANT_LOCK_RPL_INFO_TABLEwas added in 5.6.1, removed after 5.6.3.Error number:
1721; Symbol:ER_PLUGIN_NO_INSTALL; SQLSTATE:HY000Message: Plugin '%s' is marked as not dynamically installable. You have to stop the server to install it.
ER_PLUGIN_NO_INSTALLwas added in 5.6.4.Error number:
1722; Symbol:ER_BINLOG_UNSAFE_WRITE_AUTOINC_SELECT; SQLSTATE:HY000Message: Statements writing to a table with an auto-increment column after selecting from another table are unsafe because the order in which rows are retrieved determines what (if any) rows will be written. This order cannot be predicted and may differ on master and the slave.
ER_BINLOG_UNSAFE_WRITE_AUTOINC_SELECTwas added in 5.6.5.Error number:
1723; Symbol:ER_BINLOG_UNSAFE_CREATE_SELECT_AUTOINC; SQLSTATE:HY000Message: CREATE TABLE... SELECT... on a table with an auto-increment column is unsafe because the order in which rows are retrieved by the SELECT determines which (if any) rows are inserted. This order cannot be predicted and may differ on master and the slave.
ER_BINLOG_UNSAFE_CREATE_SELECT_AUTOINCwas added in 5.6.5.Error number:
1724; Symbol:ER_BINLOG_UNSAFE_INSERT_TWO_KEYS; SQLSTATE:HY000Message: INSERT... ON DUPLICATE KEY UPDATE on a table with more than one UNIQUE KEY is unsafe
ER_BINLOG_UNSAFE_INSERT_TWO_KEYSwas added in 5.6.6.Error number:
1725; Symbol:ER_TABLE_IN_FK_CHECK; SQLSTATE:HY000Message: Table is being used in foreign key check.
ER_TABLE_IN_FK_CHECKwas added in 5.6.6.Error number:
1726; Symbol:ER_UNSUPPORTED_ENGINE; SQLSTATE:HY000Message: Storage engine '%s' does not support system tables. [%s.%s]
ER_UNSUPPORTED_ENGINEwas added in 5.6.6.Error number:
1727; Symbol:ER_BINLOG_UNSAFE_AUTOINC_NOT_FIRST; SQLSTATE:HY000Message: INSERT into autoincrement field which is not the first part in the composed primary key is unsafe.
ER_BINLOG_UNSAFE_AUTOINC_NOT_FIRSTwas added in 5.6.6.Error number:
1728; Symbol:ER_CANNOT_LOAD_FROM_TABLE_V2; SQLSTATE:HY000Message: Cannot load from %s.%s. The table is probably corrupted
Error number:
1729; Symbol:ER_MASTER_DELAY_VALUE_OUT_OF_RANGE; SQLSTATE:HY000Message: The requested value %s for the master delay exceeds the maximum %u
Error number:
1730; Symbol:ER_ONLY_FD_AND_RBR_EVENTS_ALLOWED_IN_BINLOG_STATEMENT; SQLSTATE:HY000Message: Only Format_description_log_event and row events are allowed in BINLOG statements (but %s was provided)
Error number:
1731; Symbol:ER_PARTITION_EXCHANGE_DIFFERENT_OPTION; SQLSTATE:HY000Message: Non matching attribute '%s' between partition and table
Error number:
1732; Symbol:ER_PARTITION_EXCHANGE_PART_TABLE; SQLSTATE:HY000Message: Table to exchange with partition is partitioned: '%s'
Error number:
1733; Symbol:ER_PARTITION_EXCHANGE_TEMP_TABLE; SQLSTATE:HY000Message: Table to exchange with partition is temporary: '%s'
Error number:
1734; Symbol:ER_PARTITION_INSTEAD_OF_SUBPARTITION; SQLSTATE:HY000Message: Subpartitioned table, use subpartition instead of partition
Error number:
1735; Symbol:ER_UNKNOWN_PARTITION; SQLSTATE:HY000Message: Unknown partition '%s' in table '%s'
Error number:
1736; Symbol:ER_TABLES_DIFFERENT_METADATA; SQLSTATE:HY000Message: Tables have different definitions
Error number:
1737; Symbol:ER_ROW_DOES_NOT_MATCH_PARTITION; SQLSTATE:HY000Message: Found a row that does not match the partition
Error number:
1738; Symbol:ER_BINLOG_CACHE_SIZE_GREATER_THAN_MAX; SQLSTATE:HY000Message: Option binlog_cache_size (%lu) is greater than max_binlog_cache_size (%lu); setting binlog_cache_size equal to max_binlog_cache_size.
ER_BINLOG_CACHE_SIZE_GREATER_THAN_MAXwas added in 5.6.1.Error number:
1739; Symbol:ER_WARN_INDEX_NOT_APPLICABLE; SQLSTATE:HY000Message: Cannot use %s access on index '%s' due to type or collation conversion on field '%s'
ER_WARN_INDEX_NOT_APPLICABLEwas added in 5.6.1.Error number:
1740; Symbol:ER_PARTITION_EXCHANGE_FOREIGN_KEY; SQLSTATE:HY000Message: Table to exchange with partition has foreign key references: '%s'
ER_PARTITION_EXCHANGE_FOREIGN_KEYwas added in 5.6.1.Error number:
1741; Symbol:ER_NO_SUCH_KEY_VALUE; SQLSTATE:HY000Message: Key value '%s' was not found in table '%s.%s'
ER_NO_SUCH_KEY_VALUEwas added in 5.6.1.Error number:
1742; Symbol:ER_RPL_INFO_DATA_TOO_LONG; SQLSTATE:HY000Message: Data for column '%s' too long
ER_RPL_INFO_DATA_TOO_LONGwas added in 5.6.1.Error number:
1743; Symbol:ER_NETWORK_READ_EVENT_CHECKSUM_FAILURE; SQLSTATE:HY000Message: Replication event checksum verification failed while reading from network.
ER_NETWORK_READ_EVENT_CHECKSUM_FAILUREwas added in 5.6.1.Error number:
1744; Symbol:ER_BINLOG_READ_EVENT_CHECKSUM_FAILURE; SQLSTATE:HY000Message: Replication event checksum verification failed while reading from a log file.
ER_BINLOG_READ_EVENT_CHECKSUM_FAILUREwas added in 5.6.1.Error number:
1745; Symbol:ER_BINLOG_STMT_CACHE_SIZE_GREATER_THAN_MAX; SQLSTATE:HY000Message: Option binlog_stmt_cache_size (%lu) is greater than max_binlog_stmt_cache_size (%lu); setting binlog_stmt_cache_size equal to max_binlog_stmt_cache_size.
ER_BINLOG_STMT_CACHE_SIZE_GREATER_THAN_MAXwas added in 5.6.1.Error number:
1746; Symbol:ER_NO_SUCH_PARTITION; SQLSTATE:HY000Message: partition '%s' doesn't exist
ER_NO_SUCH_PARTITIONwas added in 5.6.2, removed after 5.6.5.Error number:
1746; Symbol:ER_CANT_UPDATE_TABLE_IN_CREATE_TABLE_SELECT; SQLSTATE:HY000Message: Can't update table '%s' while '%s' is being created.
ER_CANT_UPDATE_TABLE_IN_CREATE_TABLE_SELECTwas added in 5.6.2.Error number:
1747; Symbol:ER_PARTITION_CLAUSE_ON_NONPARTITIONED; SQLSTATE:HY000Message: PARTITION () clause on non partitioned table
ER_PARTITION_CLAUSE_ON_NONPARTITIONEDwas added in 5.6.2.Error number:
1748; Symbol:ER_ROW_DOES_NOT_MATCH_GIVEN_PARTITION_SET; SQLSTATE:HY000Message: Found a row not matching the given partition set
ER_ROW_DOES_NOT_MATCH_GIVEN_PARTITION_SETwas added in 5.6.2.Error number:
1749; Symbol:ER_NO_SUCH_PARTITION__UNUSED; SQLSTATE:HY000Message: partition '%s' doesn't exist
ER_NO_SUCH_PARTITION__UNUSEDwas added in 5.6.6.Error number:
1750; Symbol:ER_CHANGE_RPL_INFO_REPOSITORY_FAILURE; SQLSTATE:HY000Message: Failure while changing the type of replication repository: %s.
ER_CHANGE_RPL_INFO_REPOSITORY_FAILUREwas added in 5.6.3.Error number:
1751; Symbol:ER_WARNING_NOT_COMPLETE_ROLLBACK_WITH_CREATED_TEMP_TABLE; SQLSTATE:HY000Message: The creation of some temporary tables could not be rolled back.
ER_WARNING_NOT_COMPLETE_ROLLBACK_WITH_CREATED_TEMP_TABLEwas added in 5.6.3.Error number:
1752; Symbol:ER_WARNING_NOT_COMPLETE_ROLLBACK_WITH_DROPPED_TEMP_TABLE; SQLSTATE:HY000Message: Some temporary tables were dropped, but these operations could not be rolled back.
ER_WARNING_NOT_COMPLETE_ROLLBACK_WITH_DROPPED_TEMP_TABLEwas added in 5.6.3.Error number:
1753; Symbol:ER_MTS_FEATURE_IS_NOT_SUPPORTED; SQLSTATE:HY000Message: %s is not supported in multi-threaded slave mode. %s
ER_MTS_FEATURE_IS_NOT_SUPPORTEDwas added in 5.6.3.Error number:
1754; Symbol:ER_MTS_UPDATED_DBS_GREATER_MAX; SQLSTATE:HY000Message: The number of modified databases exceeds the maximum %d; the database names will not be included in the replication event metadata.
ER_MTS_UPDATED_DBS_GREATER_MAXwas added in 5.6.3.Error number:
1755; Symbol:ER_MTS_CANT_PARALLEL; SQLSTATE:HY000Message: Cannot execute the current event group in the parallel mode. Encountered event %s, relay-log name %s, position %s which prevents execution of this event group in parallel mode. Reason: %s.
ER_MTS_CANT_PARALLELwas added in 5.6.3.Error number:
1756; Symbol:ER_MTS_INCONSISTENT_DATA; SQLSTATE:HY000Message: %s
ER_MTS_INCONSISTENT_DATAwas added in 5.6.3.Error number:
1757; Symbol:ER_FULLTEXT_NOT_SUPPORTED_WITH_PARTITIONING; SQLSTATE:HY000Message: FULLTEXT index is not supported for partitioned tables.
ER_FULLTEXT_NOT_SUPPORTED_WITH_PARTITIONINGwas added in 5.6.4.Error number:
1758; Symbol:ER_DA_INVALID_CONDITION_NUMBER; SQLSTATE:35000Message: Invalid condition number
ER_DA_INVALID_CONDITION_NUMBERwas added in 5.6.4.Error number:
1759; Symbol:ER_INSECURE_PLAIN_TEXT; SQLSTATE:HY000Message: Sending passwords in plain text without SSL/TLS is extremely insecure.
ER_INSECURE_PLAIN_TEXTwas added in 5.6.4.Error number:
1760; Symbol:ER_INSECURE_CHANGE_MASTER; SQLSTATE:HY000Message: Storing MySQL user name or password information in the master info repository is not secure and is therefore not recommended. Please consider using the USER and PASSWORD connection options for START SLAVE; see the 'START SLAVE Syntax' in the MySQL Manual for more information.
ER_INSECURE_CHANGE_MASTERwas added in 5.6.4.Error number:
1761; Symbol:ER_FOREIGN_DUPLICATE_KEY_WITH_CHILD_INFO; SQLSTATE:23000Message: Foreign key constraint for table '%s', record '%s' would lead to a duplicate entry in table '%s', key '%s'
ER_FOREIGN_DUPLICATE_KEY_WITH_CHILD_INFOwas added in 5.6.4.Error number:
1762; Symbol:ER_FOREIGN_DUPLICATE_KEY_WITHOUT_CHILD_INFO; SQLSTATE:23000Message: Foreign key constraint for table '%s', record '%s' would lead to a duplicate entry in a child table
ER_FOREIGN_DUPLICATE_KEY_WITHOUT_CHILD_INFOwas added in 5.6.4.Error number:
1763; Symbol:ER_SQLTHREAD_WITH_SECURE_SLAVE; SQLSTATE:HY000Message: Setting authentication options is not possible when only the Slave SQL Thread is being started.
ER_SQLTHREAD_WITH_SECURE_SLAVEwas added in 5.6.4.Error number:
1764; Symbol:ER_TABLE_HAS_NO_FT; SQLSTATE:HY000Message: The table does not have FULLTEXT index to support this query
ER_TABLE_HAS_NO_FTwas added in 5.6.4.Error number:
1765; Symbol:ER_VARIABLE_NOT_SETTABLE_IN_SF_OR_TRIGGER; SQLSTATE:HY000Message: The system variable %s cannot be set in stored functions or triggers.
ER_VARIABLE_NOT_SETTABLE_IN_SF_OR_TRIGGERwas added in 5.6.5.Error number:
1766; Symbol:ER_VARIABLE_NOT_SETTABLE_IN_TRANSACTION; SQLSTATE:HY000Message: The system variable %s cannot be set when there is an ongoing transaction.
ER_VARIABLE_NOT_SETTABLE_IN_TRANSACTIONwas added in 5.6.5.Error number:
1767; Symbol:ER_GTID_NEXT_IS_NOT_IN_GTID_NEXT_LIST; SQLSTATE:HY000Message: The system variable @@SESSION.GTID_NEXT has the value %s, which is not listed in @@SESSION.GTID_NEXT_LIST.
ER_GTID_NEXT_IS_NOT_IN_GTID_NEXT_LISTwas added in 5.6.5.Error number:
1768; Symbol:ER_CANT_CHANGE_GTID_NEXT_IN_TRANSACTION_WHEN_GTID_NEXT_LIST_IS_NULL; SQLSTATE:HY000Message: The system variable @@SESSION.GTID_NEXT cannot change inside a transaction.
ER_CANT_CHANGE_GTID_NEXT_IN_TRANSACTION_WHEN_GTID_NEXT_LIST_IS_NULLwas added in 5.6.5.Error number:
1769; Symbol:ER_SET_STATEMENT_CANNOT_INVOKE_FUNCTION; SQLSTATE:HY000Message: The statement 'SET %s' cannot invoke a stored function.
ER_SET_STATEMENT_CANNOT_INVOKE_FUNCTIONwas added in 5.6.5.Error number:
1770; Symbol:ER_GTID_NEXT_CANT_BE_AUTOMATIC_IF_GTID_NEXT_LIST_IS_NON_NULL; SQLSTATE:HY000Message: The system variable @@SESSION.GTID_NEXT cannot be 'AUTOMATIC' when @@SESSION.GTID_NEXT_LIST is non-NULL.
ER_GTID_NEXT_CANT_BE_AUTOMATIC_IF_GTID_NEXT_LIST_IS_NON_NULLwas added in 5.6.5.Error number:
1771; Symbol:ER_SKIPPING_LOGGED_TRANSACTION; SQLSTATE:HY000Message: Skipping transaction %s because it has already been executed and logged.
ER_SKIPPING_LOGGED_TRANSACTIONwas added in 5.6.5.Error number:
1772; Symbol:ER_MALFORMED_GTID_SET_SPECIFICATION; SQLSTATE:HY000Message: Malformed GTID set specification '%s'.
ER_MALFORMED_GTID_SET_SPECIFICATIONwas added in 5.6.5.Error number:
1773; Symbol:ER_MALFORMED_GTID_SET_ENCODING; SQLSTATE:HY000Message: Malformed GTID set encoding.
ER_MALFORMED_GTID_SET_ENCODINGwas added in 5.6.5.Error number:
1774; Symbol:ER_MALFORMED_GTID_SPECIFICATION; SQLSTATE:HY000Message: Malformed GTID specification '%s'.
ER_MALFORMED_GTID_SPECIFICATIONwas added in 5.6.5.Error number:
1775; Symbol:ER_GNO_EXHAUSTED; SQLSTATE:HY000Message: Impossible to generate Global Transaction Identifier: the integer component reached the maximal value. Restart the server with a new server_uuid.
ER_GNO_EXHAUSTEDwas added in 5.6.5.Error number:
1776; Symbol:ER_BAD_SLAVE_AUTO_POSITION; SQLSTATE:HY000Message: Parameters MASTER_LOG_FILE, MASTER_LOG_POS, RELAY_LOG_FILE and RELAY_LOG_POS cannot be set when MASTER_AUTO_POSITION is active.
ER_BAD_SLAVE_AUTO_POSITIONwas added in 5.6.5.Error number:
1777; Symbol:ER_AUTO_POSITION_REQUIRES_GTID_MODE_ON; SQLSTATE:HY000Message: CHANGE MASTER TO MASTER_AUTO_POSITION = 1 can only be executed when @@GLOBAL.GTID_MODE = ON.
ER_AUTO_POSITION_REQUIRES_GTID_MODE_ONwas added in 5.6.5.Error number:
1778; Symbol:ER_CANT_DO_IMPLICIT_COMMIT_IN_TRX_WHEN_GTID_NEXT_IS_SET; SQLSTATE:HY000Message: Cannot execute statements with implicit commit inside a transaction when @@SESSION.GTID_NEXT != AUTOMATIC.
ER_CANT_DO_IMPLICIT_COMMIT_IN_TRX_WHEN_GTID_NEXT_IS_SETwas added in 5.6.5.Error number:
1779; Symbol:ER_GTID_MODE_2_OR_3_REQUIRES_DISABLE_GTID_UNSAFE_STATEMENTS_ON; SQLSTATE:HY000Message: GTID_MODE = ON or GTID_MODE = UPGRADE_STEP_2 requires DISABLE_GTID_UNSAFE_STATEMENTS = 1.
In 5.6.9:
ER_GTID_MODE_2_OR_3_REQUIRES_DISABLE_GTID_UNSAFE_STATEMENTS_ONwas renamed toER_GTID_MODE_2_OR_3_REQUIRES_ENFORCE_GTID_CONSISTENCY_ON.ER_GTID_MODE_2_OR_3_REQUIRES_DISABLE_GTID_UNSAFE_STATEMENTS_ONwas added in 5.6.5, removed after 5.6.8.Error number:
1779; Symbol:ER_GTID_MODE_2_OR_3_REQUIRES_ENFORCE_GTID_CONSISTENCY_ON; SQLSTATE:HY000Message: @@GLOBAL.GTID_MODE = ON or UPGRADE_STEP_2 requires @@GLOBAL.ENFORCE_GTID_CONSISTENCY = 1.
In 5.6.9:
ER_GTID_MODE_2_OR_3_REQUIRES_DISABLE_GTID_UNSAFE_STATEMENTS_ONwas renamed toER_GTID_MODE_2_OR_3_REQUIRES_ENFORCE_GTID_CONSISTENCY_ON.ER_GTID_MODE_2_OR_3_REQUIRES_ENFORCE_GTID_CONSISTENCY_ONwas added in 5.6.9.Error number:
1780; Symbol:ER_GTID_MODE_REQUIRES_BINLOG; SQLSTATE:HY000Message: @@GLOBAL.GTID_MODE = ON or UPGRADE_STEP_1 or UPGRADE_STEP_2 requires --log-bin and --log-slave-updates.
ER_GTID_MODE_REQUIRES_BINLOGwas added in 5.6.5.Error number:
1781; Symbol:ER_CANT_SET_GTID_NEXT_TO_GTID_WHEN_GTID_MODE_IS_OFF; SQLSTATE:HY000Message: @@SESSION.GTID_NEXT cannot be set to UUID:NUMBER when @@GLOBAL.GTID_MODE = OFF.
ER_CANT_SET_GTID_NEXT_TO_GTID_WHEN_GTID_MODE_IS_OFFwas added in 5.6.5.Error number:
1782; Symbol:ER_CANT_SET_GTID_NEXT_TO_ANONYMOUS_WHEN_GTID_MODE_IS_ON; SQLSTATE:HY000Message: @@SESSION.GTID_NEXT cannot be set to ANONYMOUS when @@GLOBAL.GTID_MODE = ON.
ER_CANT_SET_GTID_NEXT_TO_ANONYMOUS_WHEN_GTID_MODE_IS_ONwas added in 5.6.5.Error number:
1783; Symbol:ER_CANT_SET_GTID_NEXT_LIST_TO_NON_NULL_WHEN_GTID_MODE_IS_OFF; SQLSTATE:HY000Message: @@SESSION.GTID_NEXT_LIST cannot be set to a non-NULL value when @@GLOBAL.GTID_MODE = OFF.
ER_CANT_SET_GTID_NEXT_LIST_TO_NON_NULL_WHEN_GTID_MODE_IS_OFFwas added in 5.6.5.Error number:
1784; Symbol:ER_FOUND_GTID_EVENT_WHEN_GTID_MODE_IS_OFF; SQLSTATE:HY000Message: Found a Gtid_log_event or Previous_gtids_log_event when @@GLOBAL.GTID_MODE = OFF.
ER_FOUND_GTID_EVENT_WHEN_GTID_MODE_IS_OFFwas added in 5.6.5.Error number:
1785; Symbol:ER_GTID_UNSAFE_NON_TRANSACTIONAL_TABLE; SQLSTATE:HY000Message: When @@GLOBAL.ENFORCE_GTID_CONSISTENCY = 1, updates to non-transactional tables can only be done in either autocommitted statements or single-statement transactions, and never in the same statement as updates to transactional tables.
ER_GTID_UNSAFE_NON_TRANSACTIONAL_TABLEwas added in 5.6.5.Error number:
1786; Symbol:ER_GTID_UNSAFE_CREATE_SELECT; SQLSTATE:HY000Message: CREATE TABLE ... SELECT is forbidden when @@GLOBAL.ENFORCE_GTID_CONSISTENCY = 1.
ER_GTID_UNSAFE_CREATE_SELECTwas added in 5.6.5.Error number:
1787; Symbol:ER_GTID_UNSAFE_CREATE_DROP_TEMPORARY_TABLE_IN_TRANSACTION; SQLSTATE:HY000Message: When @@GLOBAL.ENFORCE_GTID_CONSISTENCY = 1, the statements CREATE TEMPORARY TABLE and DROP TEMPORARY TABLE can be executed in a non-transactional context only, and require that AUTOCOMMIT = 1. These statements are also not allowed in a function or trigger because functions and triggers are also considered to be multi-statement transactions.
ER_GTID_UNSAFE_CREATE_DROP_TEMPORARY_TABLE_IN_TRANSACTIONwas added in 5.6.5.Error number:
1788; Symbol:ER_GTID_MODE_CAN_ONLY_CHANGE_ONE_STEP_AT_A_TIME; SQLSTATE:HY000Message: The value of @@GLOBAL.GTID_MODE can only change one step at a time: OFF <-> UPGRADE_STEP_1 <-> UPGRADE_STEP_2 <-> ON. Also note that this value must be stepped up or down simultaneously on all servers; see the Manual for instructions.
ER_GTID_MODE_CAN_ONLY_CHANGE_ONE_STEP_AT_A_TIMEwas added in 5.6.5.Error number:
1789; Symbol:ER_MASTER_HAS_PURGED_REQUIRED_GTIDS; SQLSTATE:HY000Message: The slave is connecting using CHANGE MASTER TO MASTER_AUTO_POSITION = 1, but the master has purged binary logs containing GTIDs that the slave requires. Replicate the missing transactions from elsewhere, or provision a new slave from backup. Consider increasing the master's binary log expiration period. %s.
ER_MASTER_HAS_PURGED_REQUIRED_GTIDSwas added in 5.6.5.Error number:
1790; Symbol:ER_CANT_SET_GTID_NEXT_WHEN_OWNING_GTID; SQLSTATE:HY000Message: @@SESSION.GTID_NEXT cannot be changed by a client that owns a GTID. The client owns %s. Ownership is released on COMMIT or ROLLBACK.
ER_CANT_SET_GTID_NEXT_WHEN_OWNING_GTIDwas added in 5.6.5.Error number:
1791; Symbol:ER_UNKNOWN_EXPLAIN_FORMAT; SQLSTATE:HY000Message: Unknown EXPLAIN format name: '%s'
ER_UNKNOWN_EXPLAIN_FORMATwas added in 5.6.5.Error number:
1792; Symbol:ER_CANT_EXECUTE_IN_READ_ONLY_TRANSACTION; SQLSTATE:25006Message: Cannot execute statement in a READ ONLY transaction.
ER_CANT_EXECUTE_IN_READ_ONLY_TRANSACTIONwas added in 5.6.5.Error number:
1793; Symbol:ER_TOO_LONG_TABLE_PARTITION_COMMENT; SQLSTATE:HY000Message: Comment for table partition '%s' is too long (max = %lu)
ER_TOO_LONG_TABLE_PARTITION_COMMENTwas added in 5.6.6.Error number:
1794; Symbol:ER_SLAVE_CONFIGURATION; SQLSTATE:HY000Message: Slave is not configured or failed to initialize properly. You must at least set --server-id to enable either a master or a slave. Additional error messages can be found in the MySQL error log.
ER_SLAVE_CONFIGURATIONwas added in 5.6.6.Error number:
1795; Symbol:ER_INNODB_FT_LIMIT; SQLSTATE:HY000Message: InnoDB presently supports one FULLTEXT index creation at a time
ER_INNODB_FT_LIMITwas added in 5.6.4.Error number:
1796; Symbol:ER_INNODB_NO_FT_TEMP_TABLE; SQLSTATE:HY000Message: Cannot create FULLTEXT index on temporary InnoDB table
ER_INNODB_NO_FT_TEMP_TABLEwas added in 5.6.4.Error number:
1797; Symbol:ER_INNODB_FT_WRONG_DOCID_COLUMN; SQLSTATE:HY000Message: Column '%s' is of wrong type for an InnoDB FULLTEXT index
ER_INNODB_FT_WRONG_DOCID_COLUMNwas added in 5.6.6.Error number:
1798; Symbol:ER_INNODB_FT_WRONG_DOCID_INDEX; SQLSTATE:HY000Message: Index '%s' is of wrong type for an InnoDB FULLTEXT index
ER_INNODB_FT_WRONG_DOCID_INDEXwas added in 5.6.6.Error number:
1799; Symbol:ER_INNODB_ONLINE_LOG_TOO_BIG; SQLSTATE:HY000Message: Creating index '%s' required more than 'innodb_online_alter_log_max_size' bytes of modification log. Please try again.
ER_INNODB_ONLINE_LOG_TOO_BIGwas added in 5.6.6.Error number:
1800; Symbol:ER_UNKNOWN_ALTER_ALGORITHM; SQLSTATE:HY000Message: Unknown ALGORITHM '%s'
ER_UNKNOWN_ALTER_ALGORITHMwas added in 5.6.6.Error number:
1801; Symbol:ER_UNKNOWN_ALTER_LOCK; SQLSTATE:HY000Message: Unknown LOCK type '%s'
ER_UNKNOWN_ALTER_LOCKwas added in 5.6.6.Error number:
1802; Symbol:ER_MTS_CHANGE_MASTER_CANT_RUN_WITH_GAPS; SQLSTATE:HY000Message: CHANGE MASTER cannot be executed when the slave was stopped with an error or killed in MTS mode. Consider using RESET SLAVE or START SLAVE UNTIL.
ER_MTS_CHANGE_MASTER_CANT_RUN_WITH_GAPSwas added in 5.6.6.Error number:
1803; Symbol:ER_MTS_RECOVERY_FAILURE; SQLSTATE:HY000Message: Cannot recover after SLAVE errored out in parallel execution mode. Additional error messages can be found in the MySQL error log.
ER_MTS_RECOVERY_FAILUREwas added in 5.6.6.Error number:
1804; Symbol:ER_MTS_RESET_WORKERS; SQLSTATE:HY000Message: Cannot clean up worker info tables. Additional error messages can be found in the MySQL error log.
ER_MTS_RESET_WORKERSwas added in 5.6.6.Error number:
1805; Symbol:ER_COL_COUNT_DOESNT_MATCH_CORRUPTED_V2; SQLSTATE:HY000Message: Column count of %s.%s is wrong. Expected %d, found %d. The table is probably corrupted
Error number:
1806; Symbol:ER_SLAVE_SILENT_RETRY_TRANSACTION; SQLSTATE:HY000Message: Slave must silently retry current transaction
ER_SLAVE_SILENT_RETRY_TRANSACTIONwas added in 5.6.6.Error number:
1807; Symbol:ER_DISCARD_FK_CHECKS_RUNNING; SQLSTATE:HY000Message: There is a foreign key check running on table '%s'. Cannot discard the table.
ER_DISCARD_FK_CHECKS_RUNNINGwas added in 5.6.6.Error number:
1808; Symbol:ER_TABLE_SCHEMA_MISMATCH; SQLSTATE:HY000Message: Schema mismatch (%s)
ER_TABLE_SCHEMA_MISMATCHwas added in 5.6.6.Error number:
1809; Symbol:ER_TABLE_IN_SYSTEM_TABLESPACE; SQLSTATE:HY000Message: Table '%s' in system tablespace
ER_TABLE_IN_SYSTEM_TABLESPACEwas added in 5.6.6.Error number:
1810; Symbol:ER_IO_READ_ERROR; SQLSTATE:HY000Message: IO Read error: (%lu, %s) %s
ER_IO_READ_ERRORwas added in 5.6.6.Error number:
1811; Symbol:ER_IO_WRITE_ERROR; SQLSTATE:HY000Message: IO Write error: (%lu, %s) %s
ER_IO_WRITE_ERRORwas added in 5.6.6.Error number:
1812; Symbol:ER_TABLESPACE_MISSING; SQLSTATE:HY000Message: Tablespace is missing for table '%s'
ER_TABLESPACE_MISSINGwas added in 5.6.6.Error number:
1813; Symbol:ER_TABLESPACE_EXISTS; SQLSTATE:HY000Message: Tablespace for table '%s' exists. Please DISCARD the tablespace before IMPORT.
ER_TABLESPACE_EXISTSwas added in 5.6.6.Error number:
1814; Symbol:ER_TABLESPACE_DISCARDED; SQLSTATE:HY000Message: Tablespace has been discarded for table '%s'
ER_TABLESPACE_DISCARDEDwas added in 5.6.6.Error number:
1815; Symbol:ER_INTERNAL_ERROR; SQLSTATE:HY000Message: Internal error: %s
ER_INTERNAL_ERRORwas added in 5.6.6.Error number:
1816; Symbol:ER_INNODB_IMPORT_ERROR; SQLSTATE:HY000Message: ALTER TABLE '%s' IMPORT TABLESPACE failed with error %lu : '%s'
ER_INNODB_IMPORT_ERRORwas added in 5.6.6.Error number:
1817; Symbol:ER_INNODB_INDEX_CORRUPT; SQLSTATE:HY000Message: Index corrupt: %s
ER_INNODB_INDEX_CORRUPTwas added in 5.6.6.Error number:
1818; Symbol:ER_INVALID_YEAR_COLUMN_LENGTH; SQLSTATE:HY000Message: YEAR(%lu) column type is deprecated. Creating YEAR(4) column instead.
ER_INVALID_YEAR_COLUMN_LENGTHwas added in 5.6.6.Error number:
1819; Symbol:ER_NOT_VALID_PASSWORD; SQLSTATE:HY000Message: Your password does not satisfy the current policy requirements
ER_NOT_VALID_PASSWORDwas added in 5.6.6.Error number:
1820; Symbol:ER_MUST_CHANGE_PASSWORD; SQLSTATE:HY000Message: You must SET PASSWORD before executing this statement
ER_MUST_CHANGE_PASSWORDwas added in 5.6.6.Error number:
1821; Symbol:ER_FK_NO_INDEX_CHILD; SQLSTATE:HY000Message: Failed to add the foreign key constaint. Missing index for constraint '%s' in the foreign table '%s'
ER_FK_NO_INDEX_CHILDwas added in 5.6.6.Error number:
1822; Symbol:ER_FK_NO_INDEX_PARENT; SQLSTATE:HY000Message: Failed to add the foreign key constaint. Missing index for constraint '%s' in the referenced table '%s'
ER_FK_NO_INDEX_PARENTwas added in 5.6.6.Error number:
1823; Symbol:ER_FK_FAIL_ADD_SYSTEM; SQLSTATE:HY000Message: Failed to add the foreign key constraint '%s' to system tables
ER_FK_FAIL_ADD_SYSTEMwas added in 5.6.6.Error number:
1824; Symbol:ER_FK_CANNOT_OPEN_PARENT; SQLSTATE:HY000Message: Failed to open the referenced table '%s'
ER_FK_CANNOT_OPEN_PARENTwas added in 5.6.6.Error number:
1825; Symbol:ER_FK_INCORRECT_OPTION; SQLSTATE:HY000Message: Failed to add the foreign key constraint on table '%s'. Incorrect options in FOREIGN KEY constraint '%s'
ER_FK_INCORRECT_OPTIONwas added in 5.6.6.Error number:
1826; Symbol:ER_FK_DUP_NAME; SQLSTATE:HY000Message: Duplicate foreign key constraint name '%s'
ER_FK_DUP_NAMEwas added in 5.6.6.Error number:
1827; Symbol:ER_PASSWORD_FORMAT; SQLSTATE:HY000Message: The password hash doesn't have the expected format. Check if the correct password algorithm is being used with the PASSWORD() function.
ER_PASSWORD_FORMATwas added in 5.6.6.Error number:
1828; Symbol:ER_FK_COLUMN_CANNOT_DROP; SQLSTATE:HY000Message: Cannot drop column '%s': needed in a foreign key constraint '%s'
ER_FK_COLUMN_CANNOT_DROPwas added in 5.6.6.Error number:
1829; Symbol:ER_FK_COLUMN_CANNOT_DROP_CHILD; SQLSTATE:HY000Message: Cannot drop column '%s': needed in a foreign key constraint '%s' of table '%s'
ER_FK_COLUMN_CANNOT_DROP_CHILDwas added in 5.6.6.Error number:
1830; Symbol:ER_FK_COLUMN_NOT_NULL; SQLSTATE:HY000Message: Column '%s' cannot be NOT NULL: needed in a foreign key constraint '%s' SET NULL
ER_FK_COLUMN_NOT_NULLwas added in 5.6.6.Error number:
1831; Symbol:ER_DUP_INDEX; SQLSTATE:HY000Message: Duplicate index '%s' defined on the table '%s.%s'. This is deprecated and will be disallowed in a future release.
ER_DUP_INDEXwas added in 5.6.7.Error number:
1832; Symbol:ER_FK_COLUMN_CANNOT_CHANGE; SQLSTATE:HY000Message: Cannot change column '%s': used in a foreign key constraint '%s'
ER_FK_COLUMN_CANNOT_CHANGEwas added in 5.6.7.Error number:
1833; Symbol:ER_FK_COLUMN_CANNOT_CHANGE_CHILD; SQLSTATE:HY000Message: Cannot change column '%s': used in a foreign key constraint '%s' of table '%s'
ER_FK_COLUMN_CANNOT_CHANGE_CHILDwas added in 5.6.7.Error number:
1834; Symbol:ER_FK_CANNOT_DELETE_PARENT; SQLSTATE:HY000Message: Cannot delete rows from table which is parent in a foreign key constraint '%s' of table '%s'
ER_FK_CANNOT_DELETE_PARENTwas added in 5.6.7.Error number:
1835; Symbol:ER_MALFORMED_PACKET; SQLSTATE:HY000Message: Malformed communication packet.
ER_MALFORMED_PACKETwas added in 5.6.7.Error number:
1836; Symbol:ER_READ_ONLY_MODE; SQLSTATE:HY000Message: Running in read-only mode
ER_READ_ONLY_MODEwas added in 5.6.8.Error number:
1837; Symbol:ER_GTID_NEXT_TYPE_UNDEFINED_GROUP; SQLSTATE:HY000Message: When @@SESSION.GTID_NEXT is set to a GTID, you must explicitly set it to a different value after a COMMIT or ROLLBACK. Please check GTID_NEXT variable manual page for detailed explanation. Current @@SESSION.GTID_NEXT is '%s'.
ER_GTID_NEXT_TYPE_UNDEFINED_GROUPwas added in 5.6.9.Error number:
1838; Symbol:ER_VARIABLE_NOT_SETTABLE_IN_SP; SQLSTATE:HY000Message: The system variable %s cannot be set in stored procedures.
ER_VARIABLE_NOT_SETTABLE_IN_SPwas added in 5.6.9.Error number:
1839; Symbol:ER_CANT_SET_GTID_PURGED_WHEN_GTID_MODE_IS_OFF; SQLSTATE:HY000Message: @@GLOBAL.GTID_PURGED can only be set when @@GLOBAL.GTID_MODE = ON.
ER_CANT_SET_GTID_PURGED_WHEN_GTID_MODE_IS_OFFwas added in 5.6.9.Error number:
1840; Symbol:ER_CANT_SET_GTID_PURGED_WHEN_GTID_EXECUTED_IS_NOT_EMPTY; SQLSTATE:HY000Message: @@GLOBAL.GTID_PURGED can only be set when @@GLOBAL.GTID_EXECUTED is empty.
ER_CANT_SET_GTID_PURGED_WHEN_GTID_EXECUTED_IS_NOT_EMPTYwas added in 5.6.9.Error number:
1841; Symbol:ER_CANT_SET_GTID_PURGED_WHEN_OWNED_GTIDS_IS_NOT_EMPTY; SQLSTATE:HY000Message: @@GLOBAL.GTID_PURGED can only be set when there are no ongoing transactions (not even in other clients).
ER_CANT_SET_GTID_PURGED_WHEN_OWNED_GTIDS_IS_NOT_EMPTYwas added in 5.6.9.Error number:
1842; Symbol:ER_GTID_PURGED_WAS_CHANGED; SQLSTATE:HY000Message: @@GLOBAL.GTID_PURGED was changed from '%s' to '%s'.
ER_GTID_PURGED_WAS_CHANGEDwas added in 5.6.9.Error number:
1843; Symbol:ER_GTID_EXECUTED_WAS_CHANGED; SQLSTATE:HY000Message: @@GLOBAL.GTID_EXECUTED was changed from '%s' to '%s'.
ER_GTID_EXECUTED_WAS_CHANGEDwas added in 5.6.9.Error number:
1844; Symbol:ER_BINLOG_STMT_MODE_AND_NO_REPL_TABLES; SQLSTATE:HY000Message: Cannot execute statement: impossible to write to binary log since BINLOG_FORMAT = STATEMENT, and both replicated and non replicated tables are written to.
ER_BINLOG_STMT_MODE_AND_NO_REPL_TABLESwas added in 5.6.9.Error number:
1845; Symbol:ER_ALTER_OPERATION_NOT_SUPPORTED; SQLSTATE:0A000Message: %s is not supported for this operation. Try %s.
ER_ALTER_OPERATION_NOT_SUPPORTEDwas added in 5.6.10.Error number:
1846; Symbol:ER_ALTER_OPERATION_NOT_SUPPORTED_REASON; SQLSTATE:0A000Message: %s is not supported. Reason: %s. Try %s.
ER_ALTER_OPERATION_NOT_SUPPORTED_REASONwas added in 5.6.10.Error number:
1847; Symbol:ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_COPY; SQLSTATE:HY000Message: COPY algorithm requires a lock
ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_COPYwas added in 5.6.10.Error number:
1848; Symbol:ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_PARTITION; SQLSTATE:HY000Message: Partition specific operations do not yet support LOCK/ALGORITHM
ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_PARTITIONwas added in 5.6.10.Error number:
1849; Symbol:ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_FK_RENAME; SQLSTATE:HY000Message: Columns participating in a foreign key are renamed
ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_FK_RENAMEwas added in 5.6.10.Error number:
1850; Symbol:ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_COLUMN_TYPE; SQLSTATE:HY000Message: Cannot change column type INPLACE
ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_COLUMN_TYPEwas added in 5.6.10.Error number:
1851; Symbol:ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_FK_CHECK; SQLSTATE:HY000Message: Adding foreign keys needs foreign_key_checks=OFF
ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_FK_CHECKwas added in 5.6.10.Error number:
1852; Symbol:ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_IGNORE; SQLSTATE:HY000Message: Creating unique indexes with IGNORE requires COPY algorithm to remove duplicate rows
ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_IGNOREwas added in 5.6.10.Error number:
1853; Symbol:ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_NOPK; SQLSTATE:HY000Message: Dropping a primary key is not allowed without also adding a new primary key
ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_NOPKwas added in 5.6.10.Error number:
1854; Symbol:ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_AUTOINC; SQLSTATE:HY000Message: Adding an auto-increment column requires a lock
ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_AUTOINCwas added in 5.6.10.Error number:
1855; Symbol:ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_HIDDEN_FTS; SQLSTATE:HY000Message: Cannot replace hidden FTS_DOC_ID with a user-visible one
ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_HIDDEN_FTSwas added in 5.6.10.Error number:
1856; Symbol:ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_CHANGE_FTS; SQLSTATE:HY000Message: Cannot drop or rename FTS_DOC_ID
ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_CHANGE_FTSwas added in 5.6.10.Error number:
1857; Symbol:ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_FTS; SQLSTATE:HY000Message: Fulltext index creation requires a lock
ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_FTSwas added in 5.6.10.Error number:
1858; Symbol:ER_SQL_SLAVE_SKIP_COUNTER_NOT_SETTABLE_IN_GTID_MODE; SQLSTATE:HY000Message: sql_slave_skip_counter can not be set when the server is running with @@GLOBAL.GTID_MODE = ON. Instead, for each transaction that you want to skip, generate an empty transaction with the same GTID as the transaction
ER_SQL_SLAVE_SKIP_COUNTER_NOT_SETTABLE_IN_GTID_MODEwas added in 5.6.10.Error number:
1859; Symbol:ER_DUP_UNKNOWN_IN_INDEX; SQLSTATE:23000Message: Duplicate entry for key '%s'
ER_DUP_UNKNOWN_IN_INDEXwas added in 5.6.10.Error number:
1860; Symbol:ER_IDENT_CAUSES_TOO_LONG_PATH; SQLSTATE:HY000Message: Long database name and identifier for object resulted in path length exceeding %d characters. Path: '%s'.
ER_IDENT_CAUSES_TOO_LONG_PATHwas added in 5.6.10.Error number:
1861; Symbol:ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_NOT_NULL; SQLSTATE:HY000Message: cannot silently convert NULL values, as required in this SQL_MODE
ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_NOT_NULLwas added in 5.6.10.Error number:
1862; Symbol:ER_MUST_CHANGE_PASSWORD_LOGIN; SQLSTATE:HY000Message: Your password has expired. To log in you must change it using a client that supports expired passwords.
ER_MUST_CHANGE_PASSWORD_LOGINwas added in 5.6.11.Error number:
1863; Symbol:ER_ROW_IN_WRONG_PARTITION; SQLSTATE:HY000Message: Found a row in wrong partition %s
ER_ROW_IN_WRONG_PARTITIONwas added in 5.6.11.Error number:
1864; Symbol:ER_MTS_EVENT_BIGGER_PENDING_JOBS_SIZE_MAX; SQLSTATE:HY000Message: Cannot schedule event %s, relay-log name %s, position %s to Worker thread because its size %lu exceeds %lu of slave_pending_jobs_size_max.
ER_MTS_EVENT_BIGGER_PENDING_JOBS_SIZE_MAXwas added in 5.6.12.Error number:
1865; Symbol:ER_INNODB_NO_FT_USES_PARSER; SQLSTATE:HY000Message: Cannot CREATE FULLTEXT INDEX WITH PARSER on InnoDB table
ER_INNODB_NO_FT_USES_PARSERwas added in 5.6.12.Error number:
1866; Symbol:ER_BINLOG_LOGICAL_CORRUPTION; SQLSTATE:HY000Message: The binary log file '%s' is logically corrupted: %s
ER_BINLOG_LOGICAL_CORRUPTIONwas added in 5.6.12.Error number:
1867; Symbol:ER_WARN_PURGE_LOG_IN_USE; SQLSTATE:HY000Message: file %s was not purged because it was being read by %d thread(s), purged only %d out of %d files.
ER_WARN_PURGE_LOG_IN_USEwas added in 5.6.12.Error number:
1868; Symbol:ER_WARN_PURGE_LOG_IS_ACTIVE; SQLSTATE:HY000Message: file %s was not purged because it is the active log file.
ER_WARN_PURGE_LOG_IS_ACTIVEwas added in 5.6.12.Error number:
1869; Symbol:ER_AUTO_INCREMENT_CONFLICT; SQLSTATE:HY000Message: Auto-increment value in UPDATE conflicts with internally generated values
ER_AUTO_INCREMENT_CONFLICTwas added in 5.6.12.Error number:
1870; Symbol:WARN_ON_BLOCKHOLE_IN_RBR; SQLSTATE:HY000Message: Row events are not logged for %s statements that modify BLACKHOLE tables in row format. Table(s): '%s'
WARN_ON_BLOCKHOLE_IN_RBRwas added in 5.6.12.Error number:
1871; Symbol:ER_SLAVE_MI_INIT_REPOSITORY; SQLSTATE:HY000Message: Slave failed to initialize master info structure from the repository
ER_SLAVE_MI_INIT_REPOSITORYwas added in 5.6.12.Error number:
1872; Symbol:ER_SLAVE_RLI_INIT_REPOSITORY; SQLSTATE:HY000Message: Slave failed to initialize relay log info structure from the repository
ER_SLAVE_RLI_INIT_REPOSITORYwas added in 5.6.12.Error number:
1873; Symbol:ER_ACCESS_DENIED_CHANGE_USER_ERROR; SQLSTATE:28000Message: Access denied trying to change to user '%s'@'%s' (using password: %s). Disconnecting.
ER_ACCESS_DENIED_CHANGE_USER_ERRORwas added in 5.6.13.Error number:
1874; Symbol:ER_INNODB_READ_ONLY; SQLSTATE:HY000Message: InnoDB is in read only mode.
ER_INNODB_READ_ONLYwas added in 5.6.13.Error number:
1875; Symbol:ER_STOP_SLAVE_SQL_THREAD_TIMEOUT; SQLSTATE:HY000Message: STOP SLAVE command execution is incomplete: Slave SQL thread got the stop signal, thread is busy, SQL thread will stop once the current task is complete.
ER_STOP_SLAVE_SQL_THREAD_TIMEOUTwas added in 5.6.13.Error number:
1876; Symbol:ER_STOP_SLAVE_IO_THREAD_TIMEOUT; SQLSTATE:HY000Message: STOP SLAVE command execution is incomplete: Slave IO thread got the stop signal, thread is busy, IO thread will stop once the current task is complete.
ER_STOP_SLAVE_IO_THREAD_TIMEOUTwas added in 5.6.13.Error number:
1877; Symbol:ER_TABLE_CORRUPT; SQLSTATE:HY000Message: Operation cannot be performed. The table '%s.%s' is missing, corrupt or contains bad data.
ER_TABLE_CORRUPTwas added in 5.6.14.Error number:
1878; Symbol:ER_TEMP_FILE_WRITE_FAILURE; SQLSTATE:HY000Message: Temporary file write failure.
ER_TEMP_FILE_WRITE_FAILUREwas added in 5.6.15.Error number:
1879; Symbol:ER_INNODB_FT_AUX_NOT_HEX_ID; SQLSTATE:HY000Message: Upgrade index name failed, please use create index(alter table) algorithm copy to rebuild index.
ER_INNODB_FT_AUX_NOT_HEX_IDwas added in 5.6.16.Error number:
1880; Symbol:ER_OLD_TEMPORALS_UPGRADED; SQLSTATE:HY000Message: TIME/TIMESTAMP/DATETIME columns of old format have been upgraded to the new format.
ER_OLD_TEMPORALS_UPGRADEDwas added in 5.6.16.Error number:
1881; Symbol:ER_INNODB_FORCED_RECOVERY; SQLSTATE:HY000Message: Operation not allowed when innodb_forced_recovery > 0.
ER_INNODB_FORCED_RECOVERYwas added in 5.6.16.Error number:
1882; Symbol:ER_AES_INVALID_IV; SQLSTATE:HY000Message: The initialization vector supplied to %s is too short. Must be at least %d bytes long
ER_AES_INVALID_IVwas added in 5.6.17.Error number:
1883; Symbol:ER_PLUGIN_CANNOT_BE_UNINSTALLED; SQLSTATE:HY000Message: Plugin '%s' cannot be uninstalled now. %s
ER_PLUGIN_CANNOT_BE_UNINSTALLEDwas added in 5.6.20.Error number:
1884; Symbol:ER_GTID_UNSAFE_BINLOG_SPLITTABLE_STATEMENT_AND_GTID_GROUP; SQLSTATE:HY000Message: Cannot execute statement because it needs to be written to the binary log as multiple statements, and this is not allowed when @@SESSION.GTID_NEXT == 'UUID:NUMBER'.
ER_GTID_UNSAFE_BINLOG_SPLITTABLE_STATEMENT_AND_GTID_GROUPwas added in 5.6.20.Error number:
1885; Symbol:ER_SLAVE_HAS_MORE_GTIDS_THAN_MASTER; SQLSTATE:HY000Message: Slave has more GTIDs than the master has, using the master's SERVER_UUID. This may indicate that the end of the binary log was truncated or that the last binary log file was lost, e.g., after a power or disk failure when sync_binlog != 1. The master may or may not have rolled back transactions that were already replicated to the slave. Suggest to replicate any transactions that master has rolled back from slave to master, and/or commit empty transactions on master to account for transactions that have been committed on master but are not included in GTID_EXECUTED.
ER_SLAVE_HAS_MORE_GTIDS_THAN_MASTERwas added in 5.6.23.Error number:
1886; Symbol:ER_MISSING_KEY; SQLSTATE:HY000Message: The table '%s.%s' does not have the necessary key(s) defined on it. Please check the table definition and create index(s) accordingly.
ER_MISSING_KEYwas added in 5.6.40.Error number:
1887; Symbol:WARN_NAMED_PIPE_ACCESS_EVERYONE; SQLSTATE:HY000Message: Setting named_pipe_full_access_group='%s' is insecure. Consider using a Windows group with fewer members.
WARN_NAMED_PIPE_ACCESS_EVERYONEwas added in 5.6.45.Error number:
1888; Symbol:ER_FOUND_MISSING_GTIDS; SQLSTATE:HY000Message: Cannot replicate to server with server_uuid='%s' because the present server has purged required binary logs. The connecting server needs to replicate the missing transactions from elsewhere, or be replaced by a new server created from a more recent backup. To prevent this error in the future, consider increasing the binary log expiration period on the present server. %s.
ER_FOUND_MISSING_GTIDSwas added in 5.6.47.