Documentation Home
MySQL 8.0 Reference Manual
Related Documentation Download this Manual
PDF (US Ltr) - 43.2Mb
PDF (A4) - 43.3Mb
Man Pages (TGZ) - 296.0Kb
Man Pages (Zip) - 401.3Kb
Info (Gzip) - 4.3Mb
Info (Zip) - 4.3Mb
Excerpts from this Manual

MySQL 8.0 Reference Manual  /  ...  /  myisamchk — MyISAM Table-Maintenance Utility

6.6.4 myisamchk — MyISAM Table-Maintenance Utility

The myisamchk utility gets information about your database tables or checks, repairs, or optimizes them. myisamchk works with MyISAM tables (tables that have .MYD and .MYI files for storing data and indexes).

You can also use the CHECK TABLE and REPAIR TABLE statements to check and repair MyISAM tables. See Section 15.7.3.2, “CHECK TABLE Statement”, and Section 15.7.3.5, “REPAIR TABLE Statement”.

The use of myisamchk with partitioned tables is not supported.

Caution

It is best to make a backup of a table before performing a table repair operation; under some circumstances the operation might cause data loss. Possible causes include but are not limited to file system errors.

Invoke myisamchk like this:

myisamchk [options] tbl_name ...

The options specify what you want myisamchk to do. They are described in the following sections. You can also get a list of options by invoking myisamchk --help.

With no options, myisamchk simply checks your table as the default operation. To get more information or to tell myisamchk to take corrective action, specify options as described in the following discussion.

tbl_name is the database table you want to check or repair. If you run myisamchk somewhere other than in the database directory, you must specify the path to the database directory, because myisamchk has no idea where the database is located. In fact, myisamchk does not actually care whether the files you are working on are located in a database directory. You can copy the files that correspond to a database table into some other location and perform recovery operations on them there.

You can name several tables on the myisamchk command line if you wish. You can also specify a table by naming its index file (the file with the .MYI suffix). This enables you to specify all tables in a directory by using the pattern *.MYI. For example, if you are in a database directory, you can check all the MyISAM tables in that directory like this:

myisamchk *.MYI

If you are not in the database directory, you can check all the tables there by specifying the path to the directory:

myisamchk /path/to/database_dir/*.MYI

You can even check all tables in all databases by specifying a wildcard with the path to the MySQL data directory:

myisamchk /path/to/datadir/*/*.MYI

The recommended way to quickly check all MyISAM tables is:

myisamchk --silent --fast /path/to/datadir/*/*.MYI

If you want to check all MyISAM tables and repair any that are corrupted, you can use the following command:

myisamchk --silent --force --fast --update-state \
          --key_buffer_size=64M --myisam_sort_buffer_size=64M \
          --read_buffer_size=1M --write_buffer_size=1M \
          /path/to/datadir/*/*.MYI

This command assumes that you have more than 64MB free. For more information about memory allocation with myisamchk, see Section 6.6.4.6, “myisamchk Memory Usage”.

For additional information about using myisamchk, see Section 9.6, “MyISAM Table Maintenance and Crash Recovery”.

Important

You must ensure that no other program is using the tables while you are running myisamchk. The most effective means of doing so is to shut down the MySQL server while running myisamchk, or to lock all tables that myisamchk is being used on.

Otherwise, when you run myisamchk, it may display the following error message:

warning: clients are using or haven't closed the table properly

This means that you are trying to check a table that has been updated by another program (such as the mysqld server) that hasn't yet closed the file or that has died without closing the file properly, which can sometimes lead to the corruption of one or more MyISAM tables.

If mysqld is running, you must force it to flush any table modifications that are still buffered in memory by using FLUSH TABLES. You should then ensure that no one is using the tables while you are running myisamchk

However, the easiest way to avoid this problem is to use CHECK TABLE instead of myisamchk to check tables. See Section 15.7.3.2, “CHECK TABLE Statement”.

myisamchk supports the following options, which can be specified on the command line or in the [myisamchk] group of an option file. For information about option files used by MySQL programs, see Section 6.2.2.2, “Using Option Files”.

Table 6.20 myisamchk Options

Option Name Description
--analyze Analyze the distribution of key values
--backup Make a backup of the .MYD file as file_name-time.BAK
--block-search Find the record that a block at the given offset belongs to
--character-sets-dir Directory where character sets can be found
--check Check the table for errors
--check-only-changed Check only tables that have changed since the last check
--correct-checksum Correct the checksum information for the table
--data-file-length Maximum length of the data file (when re-creating data file when it is full)
--debug Write debugging log
--decode_bits Decode_bits
--defaults-extra-file Read named option file in addition to usual option files
--defaults-file Read only named option file
--defaults-group-suffix Option group suffix value
--description Print some descriptive information about the table
--extend-check Do very thorough table check or repair that tries to recover every possible row from the data file
--fast Check only tables that haven't been closed properly
--force Do a repair operation automatically if myisamchk finds any errors in the table
--force Overwrite old temporary files. For use with the -r or -o option
--ft_max_word_len Maximum word length for FULLTEXT indexes
--ft_min_word_len Minimum word length for FULLTEXT indexes
--ft_stopword_file Use stopwords from this file instead of built-in list
--HELP Display help message and exit
--help Display help message and exit
--information Print informational statistics about the table that is checked
--key_buffer_size Size of buffer used for index blocks for MyISAM tables
--keys-used A bit-value that indicates which indexes to update
--max-record-length Skip rows larger than the given length if myisamchk cannot allocate memory to hold them
--medium-check Do a check that is faster than an --extend-check operation
--myisam_block_size Block size to be used for MyISAM index pages
--myisam_sort_buffer_size The buffer that is allocated when sorting the index when doing a REPAIR or when creating indexes with CREATE INDEX or ALTER TABLE
--no-defaults Read no option files
--parallel-recover Uses the same technique as -r and -n, but creates all the keys in parallel, using different threads (beta)
--print-defaults Print default options
--quick Achieve a faster repair by not modifying the data file
--read_buffer_size Each thread that does a sequential scan allocates a buffer of this size for each table it scans
--read-only Do not mark the table as checked
--recover Do a repair that can fix almost any problem except unique keys that aren't unique
--safe-recover Do a repair using an old recovery method that reads through all rows in order and updates all index trees based on the rows found
--set-auto-increment Force AUTO_INCREMENT numbering for new records to start at the given value
--set-collation Specify the collation to use for sorting table indexes
--silent Silent mode
--sort_buffer_size The buffer that is allocated when sorting the index when doing a REPAIR or when creating indexes with CREATE INDEX or ALTER TABLE
--sort-index Sort the index tree blocks in high-low order
--sort_key_blocks sort_key_blocks
--sort-records Sort records according to a particular index
--sort-recover Force myisamchk to use sorting to resolve the keys even if the temporary files would be very large
--stats_method Specifies how MyISAM index statistics collection code should treat NULLs
--tmpdir Directory to be used for storing temporary files
--unpack Unpack a table that was packed with myisampack
--update-state Store information in the .MYI file to indicate when the table was checked and whether the table crashed
--verbose Verbose mode
--version Display version information and exit
--wait Wait for locked table to be unlocked, instead of terminating
--write_buffer_size Write buffer size